Lines Matching full:routing

32 .Nd Multicast Routing
51 .Tn "Multicast routing"
57 With multicast routing, the overhead is reduced to one copy
60 All multicast-capable routers must run a common multicast routing
69 section discusses previous multicast routing protocols.
71 To start multicast routing,
76 and must run a multicast routing capable user-level process.
83 This section provides information about the basic multicast routing API.
90 First, a multicast routing socket must be open.
121 routing socket must be used for sending and receiving of IGMP or MLD
124 routing socket should be reused for IGMP and MLD messages as well.
126 After the multicast routing socket is open, it can be used to enable
145 After multicast forwarding is enabled, the multicast routing socket
252 later in this text) on the multicast routing socket that was open
300 Typically, the upcall would be a signal for the multicast routing
451 This negotiation must be performed right after the multicast routing
592 complete the shortest-path switch in case of PIM-SM multicast routing,
618 field is used to specify the RP address (in case of PIM-SM multicast routing)
681 Typically, a multicast routing user-level process would need to know the
683 For example, the multicast routing process may want to timeout idle MFC
700 the kernel delivers an upcall on the multicast routing socket
701 to the multicast routing process that has installed that filter.
967 The Distance Vector Multicast Routing Protocol (DVMRP)
968 was the first developed multicast routing protocol.
973 Many other routing protocols are able to redistribute multicast routes