Lines Matching +full:card +full:- +full:detect +full:- +full:delay

2 .\" SPDX-License-Identifier: BSD-3-Clause
62 driver will detect Broadcom/LSI's 6Gb/s and 12Gb/s
73 A simple management interface is also provided per-controller via the
95 drivers can detect and manage the
105 driver will detect these controllers.
108 section to know more about driver priority for MR-Fusion devices.
111 will provide a priority of (-30) (between
120 Solid-state drives (SSD) get ATA TRIM support with
123 This may require configuring SSD as Non-RAID drive
130 .Bl -column -compact "LSI MegaRAID SAS 9380" "Invader/Fury" "12Gb/s"
173 where NNNNNN is the timeout value in milli-seconds.
182 where NN is the fault check delay value in seconds.
198 .Bl -tag -width indent -offset indent
213 driver will always set a default (-30) priority in the PCI subsystem for
214 selection of MR-Fusion cards.
219 MR-Fusion Controllers include all cards with the
220 Device IDs -
232 subsystem for selection of MR-Fusion cards.
235 driver will attach to a MR-Fusion card
244 driver to detect a MR-Fusion card instead of the
247 .Bd -ragged -offset indent
253 driver will get priority to detect MR-Fusion controllers by default.
260 driver to detect MR-Fusion cards,
263 driver to detect MR-Fusion cards.
271 For those using a MR-Fusion controller for the first time,
284 drivers for MR-Fusion.
289 which driver they want to use for the MR-Fusion card.
305 .Bl -tag -width "/dev/mrsas?" -compact
322 .Bd -ragged
327 driver which started with support for Gen-1 Controllers and
328 was extended to support up to MR-Fusion
331 .Bd -ragged
339 .Bd -ragged
361 This is the 6Gb/s MegaRAID HBA card which has device id 0x005B.
364 This is 12Gb/s MegaRAID HBA card which has device id 0x005D.
367 This is the 12Gb/s MegaRAID HBA card which has device id 0x005F.