Lines Matching +full:12 +full:a

24 .\" FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
43 .Nd Broadcom/LSI MegaRAID 6/12Gb/s SAS+SATA RAID controller driver
62 driver will detect Broadcom/LSI's 6Gb/s and 12Gb/s
64 A disk
73 A simple management interface is also provided per-controller via the
84 layer and thus requires a new driver which attaches targets to the
111 will provide a priority of (-30) (between
130 .Bl -column -compact "LSI MegaRAID SAS 9380" "Invader/Fury" "12Gb/s"
132 .It Broadcom SAS3916 Ta Aero Ta 12Gb/s
133 .It Broadcom SAS3908 Ta Aero Ta 12Gb/s
134 .It LSI MegaRAID SAS 9380 Ta Invader/Fury Ta 12Gb/s
135 .It LSI MegaRAID SAS 9361 Ta Invader/Fury Ta 12Gb/s
136 .It LSI MegaRAID SAS 9341 Ta Invader/Fury Ta 12Gb/s
145 .It LSI SAS 3108 Ta Ta 12Gb/s
146 .It LSI SAS 3008 Ta Ta 12Gb/s
149 .It DELL PERC H830 Ta Invader/Fury Ta 12Gb/s
151 .It DELL PERC H730/P Ta Invader/Fury Ta 12Gb/s
153 .It DELL PERC H330 Ta Invader/Fury Ta 12Gb/s
156 To disable Online Controller Reset(OCR) for a specific
166 To change the I/O timeout value for a specific
175 To change the firmware fault check timer value for a specific
213 driver will always set a default (-30) priority in the PCI subsystem for
227 driver will set a priority of either
235 driver will attach to a MR-Fusion card
236 given that it has a higher priority than
241 (as mentioned below), the user can provide a preference
244 driver to detect a MR-Fusion card instead of the
271 For those using a MR-Fusion controller for the first time,
342 has a
344 layer which attaches storage devices and provides a
364 This is 12Gb/s MegaRAID HBA card which has device id 0x005D.
367 This is the 12Gb/s MegaRAID HBA card which has device id 0x005F.