Lines Matching +full:over +full:- +full:current +full:- +full:active +full:- +full:high

38 driver provides access to sensor data and configuration over the
51 .Bd -literal
62 dev.lm75.0.polarity: active-low
65 .Bl -tag -width ".Va dev.lm75.%d.temperature"
67 Is the read-only value of the current temperature read by the sensor.
70 Once the temperature gets over the overtemperature shutdown value (tos)
75 Once the temperature gets over this value the output pin will be enabled.
86 It can be set to 'active-low' (default) or 'active-high'.
87 Please note that the output pin is an open-drain output and it needs a
88 proper pull-up resistor to work.
92 active, i.e., it can be woken up by setting this option to '0' again.
103 temperature data over SNMP.
107 driver supports both the low and the high resolution models.
112 The high resolution model (lm75a) provides an 11 bit output with the LSB
115 The driver tries to auto-detect the
127 .Bl -tag -width ".Va hint.lm75.%d.addr"
146 .Bd -literal
158 .Bl -tag -width ".Va compatible"
162 Indicates which 7-bit i2c address the
182 .An -nosplit