Lines Matching +full:temperature +full:- +full:tracking

2 .\" SPDX-License-Identifier: BSD-2-Clause
34 .Bd -ragged -offset indent
42 .Bd -literal -offset indent
48 .Bd -literal -offset indent
62 (TSOD), the temperature is also reported.
71 interface; all values are read-only:
72 .Bl -tag -width "dev.jedec_dimm.X.capacity"
88 if a TSOD is present, the reported temperature
97 .Bl -tag -width "hint.jedec_dimm.X.slotid"
104 JEDEC specifies that the four most-significant bits of the address are the
107 Since the least-significant bit of an SMBus address is the read/write bit, and
108 is always written as 0, that means the four least-significant bits of the
114 That mapping is useful for detailed asset tracking, and makes it easier to
119 through motherboard documentation or trial-and-error.
130 .Bd -literal -offset indent
142 .Bd -literal -offset indent
151 dev.jedec_dimm.0.part: 36ASF2G72PZ-2G1A2
172 implements a superset of the functionality of the now-deleted
179 .Bl -enum
200 .Bd -literal -offset indent
201 sed -i ".old" -e 's/jedec_ts/jedec_dimm/' \\
202     -e '/jedec_dimm/s/addr="0x3/addr="0xa/' /boot/device.hints
213 .%T Standard 21-C, Annex K
219 .%T Standard 21-C, TSE2002av
225 .%T Standard 21-C, Annex L
231 .%T Standard 21-C, TSE2004av
239 .An -nosplit
244 They are both based in part on the now-deleted