Lines Matching +full:1 +full:gbps
10 .\" 1. Redistributions of source code must retain the above copyright notice,
40 .Nd Intel Ethernet 800 Series 1GbE to 200GbE driver
233 .Xr tcpdump 1 .
249 sysctl dev.ice.<interface #>.create_interface=1
250 sysctl dev.ice.<interface #>.delete_interface=1
319 sysctl dev.ice.<interface #>.pfc=1 (or 0 to disable)
339 For example, to map UP 0 and 1 to TC 0, UP 2 and 3 to TC 1, UP 4 and
342 sysctl dev.ice.<interface #>.up2tc_map=0,0,1,1,2,2,3,3
353 sysctl dev.ice.<interface #>.pfc_mode=1 (or 0 to disable)
361 sysctl dev.ice.<interface #>.dscp2tc_map.0-7=0,1,2,3,0,0,0,0
388 sysctl dev.ice.<interface #>.fw_lldp_agent=1
430 1 = Enable Rx pause
471 sysctl dev.ice.<interface #>.allow_no_fec_modules_in_auto=1
506 0x4 - 1 Gbps
507 0x8 - 2.5 Gbps
508 0x10 - 5 Gbps
509 0x20 - 10 Gbps
510 0x80 - 25 Gbps
511 0x100 - 40 Gbps
512 0x200 - 50 Gbps
513 0x400 - 100 Gbps
514 0x800 - 200 Gbps
569 Control (Bit 1)
644 1 = error
661 sysctl dev.ice.0.debug.fw_log.severity.link=1
663 sysctl dev.ice.0.debug.fw_log.register=1
667 .Xr kenv 1
675 kenv dev.ice.0.debug.fw_log.severity.link=1
677 kenv dev.ice.0.debug.fw_log.on_load=1
736 0x1 - Switch
770 sysctl -b dev.ice.<interface #>.debug.dump.dump=1 > dump.bin
774 .Dq 1 .
785 sysctl dev.ice.0.debug.dump.dump=1
896 that comply with SFF-8431 v4.1 and SFF-8472 v10.4 specifications.
919 Any 100Gbps-capable Intel(R) Ethernet 800 Series device: Install in a
922 A 200Gbps-capable Intel(R) Ethernet 830 Series device: Install in a
932 Intel 800 series 1Gb to 200Gb Ethernet controllers:
1004 driver supports 10Gb and 1Gb Ethernet adapters with these SFP+ modules:
1008 Intel 1G/10G SFP+ 10GBASE-SR E10GSFPSR
1010 Intel 1G/10G SFP+ 10GBASE-SR E10GSFPSRG1P5
1012 Intel 1G/10G SFP+ 10GBASE-SR E10GSFPSRG2P5
1016 Intel 1G/10G SFP+ 10GBASE-LR E10GSFPLR
1028 Set to 1 to enable firmware health event reporting across all devices.
1035 Set to 1 to enable the RDMA client interface, required by the
1046 Set to 1 to enable the TX Flow Control filter across all devices.
1052 Set to 1 to enable the TX LLDP filter across all devices.
1060 Set to 1 to allow the driver to use the 5-layer Tx Scheduler tree topology if
1118 other than -1.