Lines Matching full:drive
45 .Cd hint.fd.0.drive="0"
48 .Cd hint.fd.1.drive="1"
78 for each attached drive with number
92 high-density 3.5 inch standard floppy drive.
97 This assumes the drive
100 To indicate a drive that does not have the changeline support,
101 this can be overridden using the per-drive device flags value of
112 is the drive number, and
115 Up to 15 additional subdevices per drive can be created that way.
123 configured to the maximal density that is possible for the drive type
130 Drive types are configured using the lower four bits of the per-drive
153 On IA32 architectures, the drive type can be specified as 0 for the
156 consulted to obtain the value for that drive.
158 _FDI methods, but this can be overridden by specifying a drive type hint.
160 Normally, each configured drive will be probed at initialization
167 detachable drives), it might be desirable to bypass this drive probe,
168 and pretend a drive to be there so the driver autoconfiguration will
169 work even if the drive is currently not present.
171 per-drive device flags value of
206 media present, like for status inquiries to the drive, or in order to
236 For the fixed-density subdevices (1 through 15 per drive), this
248 Obtain the current drive options.
281 Drive options will always be cleared when closing the descriptor.
308 Returns the floppy disk drive type.
311 This type is the same as being used in the per-drive configuration
347 Print detailed type information when setting the drive type.