Lines Matching +full:3 +full:- +full:inch

14 .\" 3. The name of the author may not be used to endorse or promote products
60 either FM (single-density) or MFM (double or high-density) recording
79 using the per-controller flags value of
86 For historical reasons, device nodes that use a trailing UFS-style
95 of the available medium for multi-density devices.
98 high-density 3.5 inch standard floppy drive.
107 this can be overridden using the per-drive device flags value of
113 When trying to use a floppy device with special-density media, other
130 (like 1200 KB for 5.25 inch HD drives or 1440 KB for 3.5 inch HD
136 Drive types are configured using the lower four bits of the per-drive
139 .Bl -tag -width 2n -offset indent
141 5.25 inch double-density device with 40 cylinders (360 KB native
144 5.25 inch high-density device with 80 cylinders (1200 KB native
146 .It Ar 3
147 3.5 inch double-density device with 80 cylinders (720 KB native
150 3.5 inch high-density device with 80 cylinders (1440 KB native
153 3.5 inch extra-density device with 80 cylinders (2880 KB native
177 per-drive device flags value of
205 remains in a half-opened state.
219 Operations that are not allowed on the half-opened
226 .Bl -tag -width ".Dv FD_READID"
242 For the fixed-density subdevices (1 through 15 per drive), this
245 the auto-selecting subdevice 0, the operation is temporarily allowed
258 .Bl -tag -width ".Dv FDOPT_NOERRLOG"
280 this one is read-only.
289 Clear the internal low-level error counter.
290 Normally, controller-level
317 This type is the same as being used in the per-drive configuration
321 .Bl -tag -width "debug.fdc.debugflags"
324 .Bl -tag -width "0x40"
344 non-zero return from a thread worker operation.
358 For enhanced controllers, allows a non-default FIFO
365 Specification byte one (step-rate + head unload).
369 Specification byte two (head load time + no-dma).
370 The default head load time is 16 ms, and no-dma is 0
378 .Bl -tag -width ".Pa /dev/fd*" -compact
392 .An -nosplit