Lines Matching +full:2 +full:gb

10 .\" 2. Redistributions in binary form must reproduce the above copyright
37 .Nd "Chelsio T4-, T5-, and T6-based 100Gb, 40Gb, 25Gb, 10Gb, and 1Gb Ethernet adapter driver"
92 driver supports 100Gb and 25Gb Ethernet adapters based on the T6 ASIC:
109 driver supports 40Gb, 10Gb and 1Gb Ethernet adapters based on the T5 ASIC:
140 driver supports 10Gb and 1Gb Ethernet adapters based on the T4 ASIC:
188 The default is 2 or the
242 Bit 0 represents INTx (line interrupts), bit 1 MSI, and bit 2 MSI-X.
250 2 indicates the driver should not modify the PCIe RO setting.
257 2 instructs the driver to always install the new firmware on the card as
265 A value of 2 would ensure that the Ethernet payload (usually the IP header)
279 2 instructs the hardware to both backpressure the pipeline and drop frames.
282 Bit 0 is rx_pause, bit 1 is tx_pause, bit 2 is pause_autoneg.
299 2 enables NO FEC, and bit 6 enables the FEC that is recommended by the
380 Set to 1 to drop incoming frames with Layer 2 length or checksum errors.