Lines Matching +full:com +full:- +full:offset

35 .Bd -ragged -offset indent
42 .Bd -literal -offset indent
51 tagging, checksum offload (IPv4, TCP, UDP, IPv6-TCP, IPv6-UDP), MSI-X
60 .Bl -bullet -compact
70 QLogic NetXtreme II BCM57712-MF 10Gb
74 QLogic NetXtreme II BCM57800-MF 10Gb
78 QLogic NetXtreme II BCM57810-MF 10Gb
82 QLogic NetXtreme II BCM57840-MF 10Gb
92 .Bl -tag -width indent
117 MSI/MSIX interrupt vector is allocated per-queue.
121 Sets the maximum number of receive buffers to allocate per-queue.
125 equates to 4080 buffers per-queue which is the maximum value for this config
150 DEFAULT = -1
152 Sets the PCI MRRS: -1=Auto, 0=128B, 1=256B, 2=512B, 3=1KB
160 Enable/Disable 4-tuple RSS for UDP: 0=DISABLED, 1=ENABLED
181 .Bd -literal -offset indent
182 # netstat -m
187 There are additional configuration parameters that can be set on a per-instance
191 .Bl -tag -width indent
212 .Bl -tag -width indent
213 .It Va MTU - Maximum Transmission Unit
216 RANGE = 46-9184
222 # ifconfig bxe# [ promisc | -promisc ]
228 # ifconfig bxe# [ rxcsum | -rxcsum | txcsum | -txcsum ]
229 .It Va TSO - TCP Segmentation Offload
232 # ifconfig bxe# [ tso | -tso | tso6 | -tso6 ]
233 .It Va LRO - TCP Large Receive Offload
236 # ifconfig bxe# [ lro | -lro ]
245 .Bd -literal -offset indent
246 # sysctl -a | grep hw.bxe
250 .Bd -literal -offset indent
251 # sysctl -a | grep dev.bxe
256 .Bd -literal -offset indent
257 # sysctl -a | grep dev.bxe.#
261 .Bd -literal -offset indent
262 # sysctl -a | grep dev.bxe.#.queue
267 .Bd -literal -offset indent
268 # sysctl -a | grep dev.bxe.#.queue.#
288 you to turn on/off logging of various debug groups on-the-fly.
291 .Bd -literal -offset indent
308 .Bd -literal -offset indent
313 .Bd -literal -offset indent
319 .Pa http://support.qlogic.com ,
320 or by E-mail at
321 .Aq Mt support@qlogic.com .
339 .An Eric Davis Aq Mt edavis@broadcom.com ,
340 .An David Christensen Aq Mt davidch@broadcom.com ,
342 .An Gary Zambrano Aq Mt zambrano@broadcom.com .