Lines Matching +full:software +full:- +full:based

13 .\" 3. All advertising materials mentioning features or use of this software
15 .\"	This product includes software developed by Bill Paul.
16 .\" 4. Neither the name of the author nor the names of any co-contributors
17 .\"    may be used to endorse or promote products derived from this software
20 .\" THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
29 .\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
42 .Bd -ragged -offset indent
50 .Bd -literal -offset indent
56 driver provides support for various NICs based on the Broadcom BCM570x,
61 copper cable, except for the SysKonnect SK-9D41 which supports only
64 It has two R4000 CPU cores and is PCI v2.2 and PCI-X v1.0 compliant.
67 multiple RX and TX DMA rings for QoS applications, rules-based
69 a 256-bit multicast hash filter.
71 provided via value-add firmware updates.
78 Most BCM5700-based cards also use the Broadcom BCM5401 or BCM5411 10/100/1000
95 .Bl -tag -width ".Cm 10baseT/UTP"
107 .Cm full-duplex
109 .Cm half-duplex
117 .Cm full-duplex
119 .Cm half-duplex
124 .Cm full-duplex
129 .Cm full-duplex
131 .Cm half-duplex
138 .Bl -tag -width ".Cm full-duplex"
139 .It Cm full-duplex
141 .It Cm half-duplex
150 driver provides support for various NICs based on the Broadcom BCM570x
154 .Bl -bullet -compact
156 3Com 3c996-SX (1000baseSX)
158 3Com 3c996-T (10/100/1000baseTX)
180 HP ProLiant NC7770 PCI-X Gigabit NIC (10/100/1000baseTX)
182 HP ProLiant NC7771 PCI-X Gigabit NIC (10/100/1000baseTX)
184 HP ProLiant NC7781 embedded PCI-X Gigabit NIC (10/100/1000baseTX)
188 SysKonnect SK-9D21 (10/100/1000baseTX)
190 SysKonnect SK-9D41 (1000baseSX)
197 .Bl -tag -width indent
203 Non-zero value enables MSI support on the Ethernet hardware.
212 .Bl -tag -width indent
227 .Bl -diag
235 The driver failed to allocate memory for per-device instance information
240 happen if the card is not in a bus-master slot.
275 Also, due to the lack of hotplug support, Thunderbolt-based interfaces must not be removed