Lines Matching +full:half +full:- +full:bit

16 .\" 4. Neither the name of the author nor the names of any co-contributors
42 .Bd -ragged -offset indent
50 .Bd -literal -offset indent
61 copper cable, except for the SysKonnect SK-9D41 which supports only
64 It has two R4000 CPU cores and is PCI v2.2 and PCI-X v1.0 compliant.
67 multiple RX and TX DMA rings for QoS applications, rules-based
69 a 256-bit multicast hash filter.
71 provided via value-add firmware updates.
72 The BCM570x supports TBI (ten bit interface) and GMII
78 Most BCM5700-based cards also use the Broadcom BCM5401 or BCM5411 10/100/1000
81 full or half duplex.
95 .Bl -tag -width ".Cm 10baseT/UTP"
107 .Cm full-duplex
109 .Cm half-duplex
117 .Cm full-duplex
119 .Cm half-duplex
124 .Cm full-duplex
129 .Cm full-duplex
131 .Cm half-duplex
138 .Bl -tag -width ".Cm full-duplex"
139 .It Cm full-duplex
141 .It Cm half-duplex
142 Force half duplex operation.
154 .Bl -bullet -compact
156 3Com 3c996-SX (1000baseSX)
158 3Com 3c996-T (10/100/1000baseTX)
180 HP ProLiant NC7770 PCI-X Gigabit NIC (10/100/1000baseTX)
182 HP ProLiant NC7771 PCI-X Gigabit NIC (10/100/1000baseTX)
184 HP ProLiant NC7781 embedded PCI-X Gigabit NIC (10/100/1000baseTX)
188 SysKonnect SK-9D21 (10/100/1000baseTX)
190 SysKonnect SK-9D41 (1000baseSX)
197 .Bl -tag -width indent
203 Non-zero value enables MSI support on the Ethernet hardware.
212 .Bl -tag -width indent
227 .Bl -diag
235 The driver failed to allocate memory for per-device instance information
240 happen if the card is not in a bus-master slot.
275 Also, due to the lack of hotplug support, Thunderbolt-based interfaces must not be removed