Lines Matching +full:embedded +full:- +full:controller

16 .\" 4. Neither the name of the author nor the names of any co-contributors
42 .Bd -ragged -offset indent
50 .Bd -literal -offset indent
57 571x, 572x, 575x, 576x, 578x, 5776x and 5778x Gigabit Ethernet controller
58 chips and the 590x and 5779x Fast Ethernet controller chips.
61 copper cable, except for the SysKonnect SK-9D41 which supports only
64 It has two R4000 CPU cores and is PCI v2.2 and PCI-X v1.0 compliant.
67 multiple RX and TX DMA rings for QoS applications, rules-based
69 a 256-bit multicast hash filter.
71 provided via value-add firmware updates.
78 Most BCM5700-based cards also use the Broadcom BCM5401 or BCM5411 10/100/1000
95 .Bl -tag -width ".Cm 10baseT/UTP"
107 .Cm full-duplex
109 .Cm half-duplex
117 .Cm full-duplex
119 .Cm half-duplex
124 .Cm full-duplex
129 .Cm full-duplex
131 .Cm half-duplex
138 .Bl -tag -width ".Cm full-duplex"
139 .It Cm full-duplex
141 .It Cm half-duplex
151 family of Gigabit Ethernet controller chips, including the
154 .Bl -bullet -compact
156 3Com 3c996-SX (1000baseSX)
158 3Com 3c996-T (10/100/1000baseTX)
178 HP ProLiant NC7760 embedded Gigabit NIC (10/100/1000baseTX)
180 HP ProLiant NC7770 PCI-X Gigabit NIC (10/100/1000baseTX)
182 HP ProLiant NC7771 PCI-X Gigabit NIC (10/100/1000baseTX)
184 HP ProLiant NC7781 embedded PCI-X Gigabit NIC (10/100/1000baseTX)
188 SysKonnect SK-9D21 (10/100/1000baseTX)
190 SysKonnect SK-9D41 (1000baseSX)
197 .Bl -tag -width indent
203 Non-zero value enables MSI support on the Ethernet hardware.
212 .Bl -tag -width indent
218 Enable UDP transmit checksum offloading even if controller can generate
227 .Bl -diag
235 The driver failed to allocate memory for per-device instance information
240 happen if the card is not in a bus-master slot.
275 Also, due to the lack of hotplug support, Thunderbolt-based interfaces must not be removed