Lines Matching +full:common +full:- +full:mode +full:- +full:channel

34 .Bd -ragged -offset indent
42 .Bd -literal -offset indent
71 The first line is for the common hardware independent code, and is a
73 The next three lines are generic bus-specific drivers.
74 The rest are vendor-specific PCI drivers.
78 .Bl -ohang
84 .It Va hint.ata.X.devX.mode
85 limits the initial ATA mode for the specified device on the specified channel.
86 .It Va hint.ata.X.mode
87 limits the initial ATA mode for every device on the specified channel.
89 controls SATA interface Power Management for the specified channel,
93 .Bl -tag -width 4n -offset indent -compact
102 on the specified channel.
105 Same, but for every device on the specified channel.
117 Most of the bus-management details are handled by the ATA/SATA-specific
129 Device hot-plug and SATA interface power management is supported only on
134 driver can change the transfer mode when the system is up and running.
142 driver sets the maximum transfer mode supported by the hardware as default.
146 .Dq Sy "DMA limited to UDMA33, non-ATA66 cable or device".
152 or that one of the devices on the channel only accepts up
160 .Bl -tag -width "Silicon Image:" -compact
213 Some of above chips can be configured for AHCI mode.
220 also enabled, although the max mode is limited to UDMA33, as it is