Lines Matching +full:pin +full:- +full:settings

35 .Bd -ragged -offset indent
42 .Bd -literal -offset indent
74 describes mux settings to control how those pins are interpreted when
75 making either single-ended or differential measurements.
81 To make a measurement on a given pin or pair of pins, you simply access
91 output pin, the
93 driver does not directly support the pin in terms of sensing or
94 acting on changes in the pin state.
95 However, you may connect the pin to a gpio input or fan controller
97 configure behavior and threshold values for the pin.
98 The driver avoids perturbing your settings as it does other
107 .Bl -tag -width indent
110 alert pin configuration.
114 Sets the low threshold for activating the alert pin.
116 Sets the high threshold for activating the alert pin.
125 Because measurements are always made in single-shot mode, think of
138 the corresponding input pin(s) and return the voltage in microvolts.
141 sysctl variables -- you must access it specifically by name, because
149 .Bl -column -compact -offset indent "XXXXXXXX" "XXXXXXXX"
170 .Bl -tag -width indent
173 .Bl -column -compact -offset indent ".Dq ti,ads1013" ".Dq ti,ads1113"
189 .Bd -unfilled -offset indent
194     #address-cells = <1>;
195     #size-cells = <0>;
216 .Bl -tag -width indent