Lines Matching full:operating

90 or other operating parameters.
614 operating mode on the interface to
616 For IEEE 802.11 wireless interfaces that support multiple operating modes
623 operating modes.
1045 Specify the operating mode for this cloned device.
1063 The operating mode of a cloned interface cannot be changed.
1086 device as operating in
1132 Set the AMPDU density parameter used when operating with 802.11n.
1143 Set the limit on packet size for receiving AMPDU frames when operating
1164 when operating with 802.11n.
1175 When operating as an access point, pass packets between
1201 operating as an access point).
1204 Enable background scanning when operating as a station.
1245 Set the interval at which beacon frames are sent when operating in
1265 Specify the MAC address of the access point to use when operating
1294 channels when operating as an access point.
1300 according to the operating characteristics of the device.
1317 For example, if a device is capable of operating on channel 6
1434 When operating as an access point with 802.11d enabled the beacon and
1461 operating in ap mode.
1471 operating on 5GHz frequency and doth support is enabled.
1523 stations operating in infrastructure mode.
1527 operating on either side of the wireless link.
1579 When operating as an access point, do not broadcast the SSID
1628 For interfaces operating in 802.11n, use the specified
1640 When operating as an access point the 802.11 layer monitors
1669 Display the adaptor's capabilities, including the operating
1690 typically by hearing a beacon frame from an access point operating
1800 When operating as an access point display the stations that are
1802 When operating in ad-hoc mode display stations identified as
1804 When operating in mesh mode display stations identified as
1806 When operating in station mode display the access point.
1818 Indicates that the station is operating in an 802.11g network
1831 Indicates that the station is operating in power save mode.
1859 Display the current channel parameters to use when operating in WME mode.
1877 This rate should be valid for the current operating conditions;
1896 When operating as a client, the station will conserve power by
1905 to disable powersave operation when operating as a client.
1910 For interfaces operating in 802.11g, use the specified
1924 When operating as an access point in 802.11g mode allow only
1930 When operating as an access point in 802.11n mode allow only
1956 Enable use of Reduced InterFrame Spacing (RIFS) when operating in 802.11n
1963 Set the threshold for controlling roaming when operating in a BSS.
1979 Set the threshold for controlling roaming when operating in a BSS.
1995 When operating as a station, control how the system will
2004 (handle either in the device or the operating system\[em]as appropriate),
2008 capable; otherwise, the operating system will automatically
2058 Enable use of Short Guard Interval when operating in 802.11n
2065 when operating in 802.11n.
2066 A station operating with Static SMPS maintains only a single
2072 when operating in 802.11n.
2073 A station operating with Dynamic SMPS maintains only a single
2089 When operating with TDMA, use the specified
2103 When operating with TDMA, setup a BSS with
2115 When operating with TDMA, setup a BSS such that each station has a slot
2129 When operating with TDMA, setup a BSS such that beacons are transmitted every
2143 When operating as an access point with WPA/802.11i allow legacy
2159 This rate should be valid for the current operating conditions;
2249 Traffic classification is done in the operating system using the
2295 This parameter is meaningful only when operating in ap mode.
2298 This parameter is meaningful only when operating in ap mode.
2301 This parameter is meaningful only when operating in ap mode.
2304 This parameter is meaningful only when operating in ap mode.
2314 feature available with some adapters when operating in ap mode; see
2351 The following parameters are related to a wireless interface operating in mesh
2662 The hello time may only be changed when operating in legacy stp mode.