59 		 * In 80 MHz, the bandwidth "spans" 12 channels (e.g., 36-48),  in get_center_80mhz()
109 			no_ir = 1;  in verify_80mhz()
129 		 * In 160 MHz, the bandwidth "spans" 28 channels (e.g., 36-64),  in get_center_160mhz()
179 			no_ir = 1;  in verify_160mhz()
199 		* In 320 MHz, the bandwidth "spans" 60 channels (e.g., 65-125),  in get_center_320mhz()
259 	if (bw == BW40MINUS || (bw == BW40 && (((channel - 1) / 4) % 2))) {  in verify_channel()
275 		 * valid 20 MHz channels. Override earlier allow_channel()  in verify_channel()
276 		 * result and use only the 80 MHz specific version.  in verify_channel()
282 		 * valid 20 MHz channels. Override earlier allow_channel()  in verify_channel()
283 		 * result and use only the 160 MHz specific version.  in verify_channel()
289 		 * valid 20 MHz channels. Override earlier allow_channel()  in verify_channel()
290 		 * result and use only the 80 MHz specific version.  in verify_channel()
296 		 * valid 20 MHz channels. Override earlier allow_channel()  in verify_channel()
297 		 * result and use only the 320 MHz specific version.  in verify_channel()
341 				freq5 = 1;  in wpas_op_class_supported()
343 				freq2 = 1;  in wpas_op_class_supported()
348 		freq2 = freq5 = 1;  in wpas_op_class_supported()
377 			/* Disable >= 40 MHz channels if HT is disabled */  in wpas_op_class_supported()
386 			/* Disable >= 80 MHz channels if VHT is disabled */  in wpas_op_class_supported()
399 				return 1;  in wpas_op_class_supported()
406 		/* Check if either 160 MHz channels is allowed */  in wpas_op_class_supported()
416 		/* Need at least two non-contiguous 80 MHz segments */  in wpas_op_class_supported()
452 			return 1;  in wpas_op_class_supported()
458 		/* Need at least two 80 MHz segments which do not fall under the  in wpas_op_class_supported()
459 		 * same 160 MHz segment to support 80+80 in 6 GHz.  in wpas_op_class_supported()
475 				 * MHz segments allowed.  in wpas_op_class_supported()
477 				if ((curr_seg - first_seg) > 1)  in wpas_op_class_supported()
478 					return 1;  in wpas_op_class_supported()
480 				/* Supported even if the 80 MHz segments are  in wpas_op_class_supported()
482 				 * same 160 MHz segment.  in wpas_op_class_supported()
485 					return 1;  in wpas_op_class_supported()
497 			found = 1;  in wpas_op_class_supported()
515 		return -1;  in wpas_sta_secondary_channel_offset()
547 	 * 1 byte for every other supported operating class.  in wpas_supp_op_class_ie()
555 	ie_len = wpabuf_put(buf, 1);  in wpas_supp_op_class_ie()
583 		/* Add a 1-octet operating class to the Operating Class field */  in wpas_supp_op_class_ie()
587 	/* Add the 2-octet operating classes (i.e., 80+80 MHz cases), if any */  in wpas_supp_op_class_ie()
634 	classes = os_zalloc((max_num + 1) * sizeof(int));  in wpas_supp_op_classes()