Lines Matching +full:75 +full:mhz

627 # Supported channel width set: [HT40-] = both 20 MHz and 40 MHz with secondary
628 #	channel below the primary channel; [HT40+] = both 20 MHz and 40 MHz
630 #	(20 MHz only if neither is set)
639 #	Please note that 40 MHz channels may switch their primary and secondary
640 #	channels if needed or creation of 40 MHz channel maybe rejected based
642 #	is setting up the 40 MHz channel.
644 # Short GI for 20 MHz: [SHORT-GI-20] (disabled if not set)
645 # Short GI for 40 MHz: [SHORT-GI-40] (disabled if not set)
653 # DSSS/CCK Mode in 40 MHz: [DSSS_CCK-40] = allowed (not allowed if not set)
654 # 40 MHz intolerant [40-INTOLERANT] (not advertised if not set)
662 # channels to test for stations which would be affected by 40 MHz traffic.
664 # to non-zero allows 2.4 GHz band AP to move dynamically to a 40 MHz channel if
697 # 0 = 160 MHz & 80+80 channel widths are not supported (default)
698 # 1 = 160 MHz channel width is supported
699 # 2 = 160 MHz & 80+80 channel widths are supported
707 # Short GI for 80 MHz: [SHORT-GI-80]
709 # params format equal to VHT and CBW = 80Mhz
713 # Short GI for 160 MHz: [SHORT-GI-160]
715 # params format equal to VHT and CBW = 160Mhz
808 # 0 = 20 or 40 MHz operating Channel width
809 # 1 = 80 MHz channel width
810 # 2 = 160 MHz channel width
811 # 3 = 80+80 MHz channel width
893 # and 160 MHz bandwidth operation. In 80+80 MHz operation, it is the center
895 # is used only with 80+80 MHz bandwidth operation and it is used to transmit
898 # For example idx=3 would result in 5965 MHz center frequency. In addition,
1060 # frequency of 40, 80, and 160 MHz bandwidth operation.
1073 # 320 MHz channelization in EHT mode.
1074 # If the channel is decided or the bandwidth is not 320 MHz, this option is
1077 # 1 = 320 MHz-1 (channel center frequency 31, 95, 159)
1078 # 2 = 320 MHz-2 (channel center frequency 63, 127, 191)
1083 # to a 20 MHz channel, the lowest bit corresponds to the lowest frequency. A
1092 #punct_acs_threshold=75
3123 #rssi_reject_assoc_rssi=-75
3131 #rssi_ignore_probe_request=-75