Lines Matching full:can
4 This document describes how the WPS implementation in hostapd can be
19 While WPS can enable more home networks to use encryption in the
29 - Registrar: a device that control a network and can authorize
47 hostapd includes an optional WPS component that can be used as an
49 to the network. In addition, WPS Enrollee functionality in hostapd can
51 point, e.g., for initial network setup. In addition, hostapd can proxy a
67 Following parameter can be used to enable support for NFC config method:
127 digit. "hostapd_cli wps_check_pin <PIN>" can be used to do such
168 interface. This can be done either by using the UNIX domain socket
184 time in seconds can be set for the new PIN (value 0 indicates no
196 After this, the Enrollee can connect to the AP again and complete WPS
198 client device and the client can then use that key to connect to the
202 If the AP includes a pushbutton, WPS PBC mode can be used. It is
215 When an external Registrar is used, the AP can act as an Enrollee and
217 device) can be configured in hostapd.conf (ap_pin parameter). A more
260 The internal credential generation can be disabled with
264 i.e., it will have to include valid WPS attributes. extra_cred can
268 Processing of received configuration updates can be disabled with
282 This can be used to trigger change from unconfigured to configured
284 registration). In addition, this can be used to update AP UI about the
292 This can be used to update the externally stored AP configuration and
299 WPS can be used with NFC-based configuration method. An NFC tag
300 containing a password token from the Enrollee can be used to
302 with a configuration token can be used to transfer AP settings without
306 can be used by touching the NFC interface of an external Registrar. The
316 wpa_supplicant can be used to generate NFC password tokens during
319 The "wps_nfc_config_token <WPS/NDEF>" command can be used to build an
325 can be used to touch an NFC interface on a station to provision the
330 NDEF encapsulation) can be delivered to hostapd using the
340 "nfc_get_handover_sel <NDEF> <WPS>" command can be used to build the