Lines Matching refs:doxygen

4 # doxygen (www.doxygen.org) for a project.
18 # Use doxygen to compare the used configuration file with the template
20 # doxygen -x [configFile]
21 # Use doxygen to compare the used configuration file with the template
24 # doxygen -x_noenv [configFile]
68 # entered, it will be relative to the location where doxygen was started. If
73 # If the CREATE_SUBDIRS tag is set to YES then doxygen will create up to 4096
76 # option can be useful when feeding doxygen a huge amount of source files, where
95 # If the ALLOW_UNICODE_NAMES tag is set to YES, doxygen will allow non-ASCII
104 # documentation generated by doxygen is written. Doxygen will use this
118 # If the BRIEF_MEMBER_DESC tag is set to YES, doxygen will include brief member
125 # If the REPEAT_BRIEF tag is set to YES, doxygen will prepend the brief
146 # doxygen will generate a detailed section even if there is only a brief
152 # If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all
160 # If the FULL_PATH_NAMES tag is set to YES, doxygen will prepend the full path
170 # If left blank the directory from which doxygen is run is used as the path to
174 # will be relative from the directory where doxygen is started.
188 # If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter (but
195 # If the JAVADOC_AUTOBRIEF tag is set to YES then doxygen will interpret the
204 # If the JAVADOC_BANNER tag is set to YES then doxygen will interpret a line
209 # interpreted by doxygen.
214 # If the QT_AUTOBRIEF tag is set to YES then doxygen will interpret the first
222 # The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make doxygen treat a
234 # By default Python docstrings are displayed as preformatted text and doxygen's
236 # doxygen's special commands can be used and the contents of the docstring
237 # documentation blocks is shown as doxygen documentation.
248 # If the SEPARATE_MEMBER_PAGES tag is set to YES then doxygen will produce a new
318 # language is one of the parsers supported by doxygen: IDL, Java, JavaScript,
323 # default for Fortran type files). For instance to make doxygen treat .inc files
330 # the files are not read by doxygen. When specifying no_extension you should add
337 # If the MARKDOWN_SUPPORT tag is enabled then doxygen pre-processes all comments
340 # The output of markdown processing is further processed by doxygen, so you can
341 # mix doxygen, HTML, and XML commands with Markdown formatting. Disable only in
367 # When enabled doxygen tries to link words that correspond to documented
377 # tag to YES in order to let doxygen match functions declarations and
401 # doxygen to replace the get and set methods by a property in the documentation.
410 # tag is set to YES then doxygen will reuse the documentation of the first
468 # code, doxygen keeps a cache of pre-resolved symbols. If the cache is too small
469 # doxygen will become slower. If the cache is too large, memory is wasted. The
472 # symbols. At the end of a run doxygen will report the cache usage and suggest
478 # The NUM_PROC_THREADS specifies the number of threads doxygen is allowed to use
479 # during processing. When set to 0 doxygen will based this on the number of
503 # If the EXTRACT_ALL tag is set to YES, doxygen will assume all entities in
569 # If the HIDE_UNDOC_MEMBERS tag is set to YES, doxygen will hide all
577 # If the HIDE_UNDOC_CLASSES tag is set to YES, doxygen will hide all
586 # If the HIDE_FRIEND_COMPOUNDS tag is set to YES, doxygen will hide all friend
593 # If the HIDE_IN_BODY_DOCS tag is set to YES, doxygen will hide any
607 # With the correct setting of option CASE_SENSE_NAMES doxygen will better be
624 # If the HIDE_SCOPE_NAMES tag is set to NO then doxygen will show members with
631 # If the HIDE_COMPOUND_REFERENCE tag is set to NO (default) then doxygen will
644 # If the SHOW_INCLUDE_FILES tag is set to YES then doxygen will put a list of
657 # If the FORCE_LOCAL_INCLUDES tag is set to YES then doxygen will list include
669 # If the SORT_MEMBER_DOCS tag is set to YES then doxygen will sort the
676 # If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the brief
684 # If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the
696 # If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the hierarchy
713 # If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to do proper
717 # simple string match. By disabling STRICT_PROTO_MATCHING doxygen will still
787 # doxygen should invoke to get the current version for each file (typically from
791 # by doxygen. Whatever the program writes to standard output is used as the file
797 # by doxygen. The layout file controls the global structure of the generated
799 # that represents doxygen's defaults, run doxygen with the -l option. You can
804 # Note that if you run doxygen from a directory containing a file called
805 # DoxygenLayout.xml, doxygen will parse it automatically even if the LAYOUT_FILE
825 # standard output by doxygen. If QUIET is set to YES this implies that the
832 # generated to standard error (stderr) by doxygen. If WARNINGS is set to YES
840 # If the WARN_IF_UNDOCUMENTED tag is set to YES then doxygen will generate
847 # If the WARN_IF_DOC_ERROR tag is set to YES, doxygen will generate warnings for
855 # If WARN_IF_INCOMPLETE_DOC is set to YES, doxygen will warn about incomplete
856 # function parameter documentation. If set to NO, doxygen will accept that some
864 # value. If set to NO, doxygen will only warn about wrong parameter
872 # If WARN_IF_UNDOC_ENUM_VAL option is set to YES, doxygen will warn about
873 # undocumented enumeration values. If set to NO, doxygen will accept
880 # If the WARN_AS_ERROR tag is set to YES then doxygen will immediately stop when
882 # then doxygen will continue running as if WARN_AS_ERROR tag is set to NO, but
883 # at the end of the doxygen process doxygen will return with a non-zero status.
884 # If the WARN_AS_ERROR tag is set to FAIL_ON_WARNINGS_PRINT then doxygen behaves
885 # like FAIL_ON_WARNINGS but in case no WARN_LOGFILE is defined doxygen will not
896 # The WARN_FORMAT tag determines the format of the warning messages that doxygen
909 # (outside of doxygen) the user can define a custom "cut" / "paste" string.
939 # that doxygen parses. Internally doxygen uses the UTF-8 encoding. Doxygen uses
949 # that doxygen parses The INPUT_FILE_ENCODING tag can be used to specify
964 # read by doxygen.
972 # *.inc, *.m, *.markdown, *.md, *.mm, *.dox (to be provided as doxygen C
988 # Note that relative paths are relative to the directory from which doxygen is
1064 # The INPUT_FILTER tag can be used to specify a program that doxygen should
1079 # Note that doxygen will use the data processed and written to standard output
1086 # properly processed by doxygen.
1099 # properly processed by doxygen.
1121 # and want to reuse the introduction page also for the doxygen output.
1153 # Setting the STRIP_CODE_COMMENTS tag to YES will instruct doxygen to hide any
1191 # point to the HTML generated by the htags(1) tool instead of doxygen built-in
1200 # - Run doxygen as normal
1205 # The result: instead of the source browser generated by doxygen, the links to
1212 # If the VERBATIM_HEADERS tag is set the YES then doxygen will generate a
1220 # If the CLANG_ASSISTED_PARSING tag is set to YES then doxygen will use the
1224 # which doxygen's built-in parser lacks the necessary type information.
1225 # Note: The availability of this option depends on whether or not doxygen was
1232 # tag is set to YES then doxygen will add the directory of each input to the
1241 # the include paths will already be set by doxygen for the files and directories
1255 # Note: The availability of this option depends on whether or not doxygen was
1284 # If the GENERATE_HTML tag is set to YES, doxygen will generate HTML output
1305 # each generated HTML page. If the tag is left blank doxygen will generate a
1309 # that doxygen needs, which is dependent on the configuration options used (e.g.
1312 # doxygen -w html new_header.html new_footer.html new_stylesheet.css
1315 # for information on how to generate the default header that doxygen normally
1318 # default header when upgrading to a newer version of doxygen. For a description
1325 # generated HTML page. If the tag is left blank doxygen will generate a standard
1329 # that doxygen normally uses.
1336 # the HTML output. If left blank doxygen will generate a default style sheet.
1338 # sheet that doxygen normally uses.
1348 # created by doxygen. Using this option one can overrule certain style aspects.
1356 # Webkit/Chromium, the styling will be left out of the default doxygen.css if
1453 # create a documentation set, doxygen will generate a Makefile in the HTML
1482 # The default value is: org.doxygen.Project.
1485 DOCSET_BUNDLE_ID       = org.doxygen.Project
1490 # The default value is: org.doxygen.Publisher.
1493 DOCSET_PUBLISHER_ID    = org.doxygen.Publisher
1501 # If the GENERATE_HTMLHELP tag is set to YES then doxygen generates three
1512 # generated by doxygen into a single compiled HTML file (.chm). Compiled HTML
1532 # doxygen will try to run the HTML help compiler on the generated index.hhp.
1596 # The default value is: org.doxygen.Project.
1599 QHP_NAMESPACE          = org.doxygen.Project
1634 # including file name) of Qt's qhelpgenerator. If non-empty doxygen will try to
1655 # The default value is: org.doxygen.Project.
1658 ECLIPSE_DOC_ID         = org.doxygen.Project
1679 # example, the default style sheet generated by doxygen has an example that
1701 # doxygen will group on one line in the generated HTML documentation.
1717 # If the EXT_LINKS_IN_WINDOW option is set to YES, doxygen will open links to
1724 # If the OBFUSCATE_EMAILS tag is set to YES, doxygen will obfuscate email
1731 # If the HTML_FORMULA_FORMAT option is set to svg, doxygen will use the pdf2svg
1744 # doxygen run you need to manually remove any form_*.png images from the HTML
1831 # When the SEARCHENGINE tag is enabled doxygen will generate a search box for
1855 # setting. When disabled, doxygen will generate a PHP script for searching and
1864 # When EXTERNAL_SEARCH tag is enabled doxygen will no longer generate the PHP
1909 # The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen
1923 # If the GENERATE_LATEX tag is set to YES, doxygen will generate LaTeX output.
1968 # If the COMPACT_LATEX tag is set to YES, doxygen generates more compact LaTeX
1999 # first chapter. If it is left blank doxygen will generate a standard header. It
2001 # doxygen -w latex new_header.tex new_footer.tex new_stylesheet.sty
2003 # information on how to generate the default header that doxygen normally uses.
2007 # default header when upgrading to a newer version of doxygen. The following
2016 # last chapter. If it is left blank doxygen will generate a standard footer. See
2019 # usage" for information on how to generate the default footer that doxygen
2028 # by doxygen. Using this option one can overrule certain style aspects. Doxygen
2054 # If the USE_PDFLATEX tag is set to YES, doxygen will use the engine as
2079 # If the LATEX_HIDE_INDICES tag is set to YES then doxygen will not include the
2106 # If the GENERATE_RTF tag is set to YES, doxygen will generate RTF output. The
2121 # If the COMPACT_RTF tag is set to YES, doxygen generates more compact RTF
2141 # Load stylesheet definitions from file. Syntax is similar to doxygen's
2146 # default style sheet that doxygen normally uses.
2152 # similar to doxygen's configuration file. A template extensions file can be
2153 # generated using doxygen -e rtf extensionFile.
2162 # If the GENERATE_MAN tag is set to YES, doxygen will generate man pages for
2193 # If the MAN_LINKS tag is set to YES and doxygen generates man output, then it
2206 # If the GENERATE_XML tag is set to YES, doxygen will generate an XML file that
2220 # If the XML_PROGRAMLISTING tag is set to YES, doxygen will dump the program
2229 # If the XML_NS_MEMB_FILE_SCOPE tag is set to YES, doxygen will include
2240 # If the GENERATE_DOCBOOK tag is set to YES, doxygen will generate Docbook files
2258 # If the GENERATE_AUTOGEN_DEF tag is set to YES, doxygen will generate an
2270 # If the GENERATE_PERLMOD tag is set to YES, doxygen will generate a Perl module
2278 # If the PERLMOD_LATEX tag is set to YES, doxygen will generate the necessary
2308 # If the ENABLE_PREPROCESSING tag is set to YES, doxygen will evaluate all
2314 # If the MACRO_EXPANSION tag is set to YES, doxygen will expand all macro names
2373 # If the SKIP_FUNCTION_MACROS tag is set to YES then doxygen's preprocessor will
2397 # the path). If a tag file is not located in the directory in which doxygen is
2402 # When a file name is specified after GENERATE_TAGFILE, doxygen will create a
2439 # If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is
2448 # The DOT_NUM_THREADS specifies the number of dot invocations doxygen is allowed
2449 # to run in parallel. When set to 0 doxygen will base this on the number of
2460 # doxygen generates you can specify fontname, fontcolor and fontsize attributes.
2494 # If the CLASS_GRAPH tag is set to YES or GRAPH or BUILTIN then doxygen will
2507 # If the COLLABORATION_GRAPH tag is set to YES then doxygen will generate a
2516 # If the GROUP_GRAPHS tag is set to YES then doxygen will generate a graph for
2524 # If the UML_LOOK tag is set to YES, doxygen will generate inheritance and
2545 # If the DOT_UML_DETAILS tag is set to NO, doxygen will show attributes and
2547 # tag is set to YES, doxygen will add type and arguments for attributes and
2548 # methods in the UML graphs. If the DOT_UML_DETAILS tag is set to NONE, doxygen
2576 # YES then doxygen will generate a graph for each documented file showing the
2585 # set to YES then doxygen will generate a graph for each documented file showing
2593 # If the CALL_GRAPH tag is set to YES then doxygen will generate a call
2605 # If the CALLER_GRAPH tag is set to YES then doxygen will generate a caller
2617 # If the GRAPHICAL_HIERARCHY tag is set to YES then doxygen will graphical
2624 # If the DIRECTORY_GRAPH tag is set to YES then doxygen will show the
2680 # You can include diagrams made with dia in doxygen documentation. Doxygen will
2713 # larger than this value, doxygen will truncate the graph, which is visualized
2714 # by representing a node as a red box. Note that doxygen if the number of direct
2744 # If the GENERATE_LEGEND tag is set to YES doxygen will generate a legend page
2747 # Note: This tag requires that UML_LOOK isn't set, i.e. the doxygen internal
2754 # If the DOT_CLEANUP tag is set to YES, doxygen will remove the intermediate
2763 # You can define message sequence charts within doxygen comments using the \msc
2764 # command. If the MSCGEN_TOOL tag is left empty (the default), then doxygen will
2767 # specifying prog as the value, doxygen will call the tool as prog -T