Lines Matching +full:self +full:- +full:working +full:- +full:mode
3 .TH INFINIBAND-DIAGS 8 "" "" "Open IB Diagnostics"
5 INFINIBAND-DIAGS \-
7 .nr rst2man-indent-level 0
10 \\$1 \\n[an-margin]
11 level \\n[rst2man-indent-level]
12 level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
13 -
14 \\n[rst2man-indent0]
15 \\n[rst2man-indent1]
16 \\n[rst2man-indent2]
21 . nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
22 . nr rst2man-indent-level +1
27 .\" indent \\n[an-margin]
28 .\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
29 .nr rst2man-indent-level -1
30 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
36 infiniband\-diags is a set of utilities designed to help configure, debug, and
46 data directly from the SMA. While this mode of operation is not technically in
48 that this level of diagnostics is valuable when working with a fabric which is
59 The \-D and \-G option have two forms:
60 .\" Define the common option -D for Directed routes
63 \fB\-D, \-\-Direct\fP The address specified is a directed route
70 [options] \-D [options] "0" # self port
71 [options] \-D [options] "0,1,2,1,4" # out via port 1, then 2, ...
74 used. This can be specified using the port selection flag \(aq\-P\(aq or the
80 .\" Define the common option -D for Directed routes
83 \fB\-D, \-\-Direct <dr_path>\fP The address specified is a directed route
90 \-D "0" # self port
91 \-D "0,1,2,1,4" # out via port 1, then 2, ...
94 used. This can be specified using the port selection flag \(aq\-P\(aq or the
100 .\" Define the common option -G
103 \fB\-G, \-\-Guid\fP The address specified is a Port GUID
104 .\" Define the common option -G
107 \fB\-\-port\-guid, \-G <port_guid>\fP Specify a port_guid
108 .\" Define the common option -L
111 \fB\-L, \-\-Lid\fP The address specified is a LID
112 .\" Define the common option -s
115 \fB\-s, \-\-sm_port <smlid>\fP use \(aqsmlid\(aq as the target lid for SA queries.
117 .\" Define the common option -C
120 \fB\-C, \-\-Ca <ca_name>\fP use the specified ca_name.
121 .\" Define the common option -P
124 \fB\-P, \-\-Port <ca_port>\fP use the specified ca_port.
151 ibaddr \-C mthca1 # pick the best port from "mthca1" only.
152 ibaddr \-P 2 # use the second (active/up) port from the first available IB device.
153 ibaddr \-C mthca0 \-P 2 # use the specified port only.
161 .\" Define the common option -d
165 .B \-d
167 May be used several times (\-ddd or \-d \-d \-d).
169 .\" Define the common option -e
173 .B \-e
176 .\" Define the common option -h
179 \fB\-h, \-\-help\fP show the usage message
180 .\" Define the common option -v
184 .B \fB\-v, \-\-verbose\fP
186 May be used several times (\-vv or \-v \-v \-v)
188 .\" Define the common option -V
191 \fB\-V, \-\-version\fP show the version info.
193 .\" Define the common option -t
196 \fB\-t, \-\-timeout <timeout_ms>\fP override the default timeout for the solicited mads.
197 .\" Define the common option -z
201 .B \fB\-\-outstanding_smps, \-o <val>\fP
206 .\" Define the common option --node-name-map
209 \fB\-\-node\-name\-map <node\-name\-map>\fP Specify a node name map.
215 .\" Define the common option -z
218 \fB\-\-config, \-z <config_file>\fP Specify alternate config file.
221 Default: /etc/infiniband-diags/ibdiag.conf
231 /etc/infiniband-diags/ibdiag.conf
242 This functionality is provided by the opensm\-libs package. See \fBopensm(8)\fP
266 0x0008f104003f125c "IB1 (Rack 11 slot 1 ) ISR9288/ISR9096 Voltaire sLB\-24D"
267 0x0008f104003f125d "IB1 (Rack 11 slot 1 ) ISR9288/ISR9096 Voltaire sLB\-24D"
268 0x0008f104003f10d2 "IB1 (Rack 11 slot 2 ) ISR9288/ISR9096 Voltaire sLB\-24D"
269 0x0008f104003f10d3 "IB1 (Rack 11 slot 2 ) ISR9288/ISR9096 Voltaire sLB\-24D"
270 0x0008f104003f10bf "IB1 (Rack 11 slot 12 ) ISR9288/ISR9096 Voltaire sLB\-24D"
273 0x0008f10400400e2d "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB\-12D"
274 0x0008f10400400e2e "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB\-12D"
275 0x0008f10400400e2f "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB\-12D"
276 0x0008f10400400e31 "IB1 (Rack 11 spine 2 ) ISR9288 Voltaire sFB\-12D"
277 0x0008f10400400e32 "IB1 (Rack 11 spine 2 ) ISR9288 Voltaire sFB\-12D"
304 followed by \- followed by NodeGUID with the port number in square brackets.
325 Non\-Chassis Nodes
331 Switch 24 "S\-005442ba00003080" # "ISR9024 Voltaire" base port 0 lid 6 lmc 0
332 [22] "H\-0008f10403961354"[1](8f10403961355) # "MT23108 InfiniHost Mellanox Technologies…
333 [10] "S\-0008f10400410015"[1] # "SW\-6IB4 Voltaire" lid 3 4xSDR
334 [8] "H\-0008f10403960558"[2](8f1040396055a) # "MT23108 InfiniHost Mellanox Technologies…
335 [6] "S\-0008f10400410015"[3] # "SW\-6IB4 Voltaire" lid 3 4xSDR
336 [12] "H\-0008f10403960558"[1](8f10403960559) # "MT23108 InfiniHost Mellanox Technologies…
341 Switch 8 "S\-0008f10400410015" # "SW\-6IB4 Voltaire" base port 0 lid 3 lmc 0
342 [6] "H\-0008f10403960984"[1](8f10403960985) # "MT23108 InfiniHost Mellanox Technologies…
343 [4] "H\-005442b100004900"[1](5442b100004901) # "MT23108 InfiniHost Mellanox Technologies…
344 [1] "S\-005442ba00003080"[10] # "ISR9024 Voltaire" lid 6 1xSDR
345 [3] "S\-005442ba00003080"[6] # "ISR9024 Voltaire" lid 6 4xSDR
350 Ca 2 "H\-0008f10403960984" # "MT23108 InfiniHost Mellanox Technologies"
351 [1](8f10403960985) "S\-0008f10400410015"[6] # lid 16 lmc 1 "SW\-6IB4 Voltaire" lid 3 4x…
356 Ca 2 "H\-005442b100004900" # "MT23108 InfiniHost Mellanox Technologies"
357 [1](5442b100004901) "S\-0008f10400410015"[4] # lid 12 lmc 1 "SW\-6IB4 Voltaire" lid 3 4…
362 Ca 2 "H\-0008f10403961354" # "MT23108 InfiniHost Mellanox Technologies"
363 [1](8f10403961355) "S\-005442ba00003080"[22] # lid 4 lmc 1 "ISR9024 Voltaire" li…
368 Ca 2 "H\-0008f10403960558" # "MT23108 InfiniHost Mellanox Technologies"
369 [2](8f1040396055a) "S\-005442ba00003080"[8] # lid 14 lmc 1 "ISR9024 Voltaire" lid 6 4xS…
370 [1](8f10403960559) "S\-005442ba00003080"[12] # lid 10 lmc 1 "ISR9024 Voltaire" l…
378 displayed as "Non\-Chassis Nodes". External ports are also shown on the
439 \-\-enable\-compat\-utils is specified at build time.