Lines Matching +full:re +full:- +full:routed
3 .TH INFINIBAND-DIAGS 8 "" "" "Open IB Diagnostics"
5 INFINIBAND-DIAGS \-
7 .nr rst2man-indent-level 0
10 \\$1 \\n[an-margin]
11 level \\n[rst2man-indent-level]
12 level margin: \\n[rst2man-indent\\n[rst2man-indent-level]]
13 -
14 \\n[rst2man-indent0]
15 \\n[rst2man-indent1]
16 \\n[rst2man-indent2]
21 . nr rst2man-indent\\n[rst2man-indent-level] \\n[an-margin]
22 . nr rst2man-indent-level +1
26 . RE
27 .\" indent \\n[an-margin]
28 .\" old: \\n[rst2man-indent\\n[rst2man-indent-level]]
29 .nr rst2man-indent-level -1
30 .\" new: \\n[rst2man-indent\\n[rst2man-indent-level]]
36 infiniband\-diags is a set of utilities designed to help configure, debug, and
42 utilities, require LID routed MAD\(aqs and to some extent SA/SM access.
59 The \-D and \-G option have two forms:
60 .\" Define the common option -D for Directed routes
63 \fB\-D, \-\-Direct\fP The address specified is a directed route
70 [options] \-D [options] "0" # self port
71 [options] \-D [options] "0,1,2,1,4" # out via port 1, then 2, ...
74 used. This can be specified using the port selection flag \(aq\-P\(aq or the
80 .\" Define the common option -D for Directed routes
83 \fB\-D, \-\-Direct <dr_path>\fP The address specified is a directed route
90 \-D "0" # self port
91 \-D "0,1,2,1,4" # out via port 1, then 2, ...
94 used. This can be specified using the port selection flag \(aq\-P\(aq or the
100 .\" Define the common option -G
103 \fB\-G, \-\-Guid\fP The address specified is a Port GUID
104 .\" Define the common option -G
107 \fB\-\-port\-guid, \-G <port_guid>\fP Specify a port_guid
108 .\" Define the common option -L
111 \fB\-L, \-\-Lid\fP The address specified is a LID
112 .\" Define the common option -s
115 \fB\-s, \-\-sm_port <smlid>\fP use \(aqsmlid\(aq as the target lid for SA queries.
117 .\" Define the common option -C
120 \fB\-C, \-\-Ca <ca_name>\fP use the specified ca_name.
121 .\" Define the common option -P
124 \fB\-P, \-\-Port <ca_port>\fP use the specified ca_port.
151 ibaddr \-C mthca1 # pick the best port from "mthca1" only.
152 ibaddr \-P 2 # use the second (active/up) port from the first available IB device.
153 ibaddr \-C mthca0 \-P 2 # use the specified port only.
161 .\" Define the common option -d
165 .B \-d
167 May be used several times (\-ddd or \-d \-d \-d).
169 .\" Define the common option -e
173 .B \-e
176 .\" Define the common option -h
179 \fB\-h, \-\-help\fP show the usage message
180 .\" Define the common option -v
184 .B \fB\-v, \-\-verbose\fP
186 May be used several times (\-vv or \-v \-v \-v)
188 .\" Define the common option -V
191 \fB\-V, \-\-version\fP show the version info.
193 .\" Define the common option -t
196 \fB\-t, \-\-timeout <timeout_ms>\fP override the default timeout for the solicited mads.
197 .\" Define the common option -z
201 .B \fB\-\-outstanding_smps, \-o <val>\fP
206 .\" Define the common option --node-name-map
209 \fB\-\-node\-name\-map <node\-name\-map>\fP Specify a node name map.
215 .\" Define the common option -z
218 \fB\-\-config, \-z <config_file>\fP Specify alternate config file.
221 Default: /etc/infiniband-diags/ibdiag.conf
231 /etc/infiniband-diags/ibdiag.conf
242 This functionality is provided by the opensm\-libs package. See \fBopensm(8)\fP
266 0x0008f104003f125c "IB1 (Rack 11 slot 1 ) ISR9288/ISR9096 Voltaire sLB\-24D"
267 0x0008f104003f125d "IB1 (Rack 11 slot 1 ) ISR9288/ISR9096 Voltaire sLB\-24D"
268 0x0008f104003f10d2 "IB1 (Rack 11 slot 2 ) ISR9288/ISR9096 Voltaire sLB\-24D"
269 0x0008f104003f10d3 "IB1 (Rack 11 slot 2 ) ISR9288/ISR9096 Voltaire sLB\-24D"
270 0x0008f104003f10bf "IB1 (Rack 11 slot 12 ) ISR9288/ISR9096 Voltaire sLB\-24D"
273 0x0008f10400400e2d "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB\-12D"
274 0x0008f10400400e2e "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB\-12D"
275 0x0008f10400400e2f "IB1 (Rack 11 spine 1 ) ISR9288 Voltaire sFB\-12D"
276 0x0008f10400400e31 "IB1 (Rack 11 spine 2 ) ISR9288 Voltaire sFB\-12D"
277 0x0008f10400400e32 "IB1 (Rack 11 spine 2 ) ISR9288 Voltaire sFB\-12D"
304 followed by \- followed by NodeGUID with the port number in square brackets.
325 Non\-Chassis Nodes
331 Switch 24 "S\-005442ba00003080" # "ISR9024 Voltaire" base port 0 lid 6 lmc 0
332 [22] "H\-0008f10403961354"[1](8f10403961355) # "MT23108 InfiniHost Mellanox Technologies…
333 [10] "S\-0008f10400410015"[1] # "SW\-6IB4 Voltaire" lid 3 4xSDR
334 [8] "H\-0008f10403960558"[2](8f1040396055a) # "MT23108 InfiniHost Mellanox Technologies…
335 [6] "S\-0008f10400410015"[3] # "SW\-6IB4 Voltaire" lid 3 4xSDR
336 [12] "H\-0008f10403960558"[1](8f10403960559) # "MT23108 InfiniHost Mellanox Technologies…
341 Switch 8 "S\-0008f10400410015" # "SW\-6IB4 Voltaire" base port 0 lid 3 lmc 0
342 [6] "H\-0008f10403960984"[1](8f10403960985) # "MT23108 InfiniHost Mellanox Technologies…
343 [4] "H\-005442b100004900"[1](5442b100004901) # "MT23108 InfiniHost Mellanox Technologies…
344 [1] "S\-005442ba00003080"[10] # "ISR9024 Voltaire" lid 6 1xSDR
345 [3] "S\-005442ba00003080"[6] # "ISR9024 Voltaire" lid 6 4xSDR
350 Ca 2 "H\-0008f10403960984" # "MT23108 InfiniHost Mellanox Technologies"
351 [1](8f10403960985) "S\-0008f10400410015"[6] # lid 16 lmc 1 "SW\-6IB4 Voltaire" lid 3 4x…
356 Ca 2 "H\-005442b100004900" # "MT23108 InfiniHost Mellanox Technologies"
357 [1](5442b100004901) "S\-0008f10400410015"[4] # lid 12 lmc 1 "SW\-6IB4 Voltaire" lid 3 4…
362 Ca 2 "H\-0008f10403961354" # "MT23108 InfiniHost Mellanox Technologies"
363 [1](8f10403961355) "S\-005442ba00003080"[22] # lid 4 lmc 1 "ISR9024 Voltaire" li…
368 Ca 2 "H\-0008f10403960558" # "MT23108 InfiniHost Mellanox Technologies"
369 [2](8f1040396055a) "S\-005442ba00003080"[8] # lid 14 lmc 1 "ISR9024 Voltaire" lid 6 4xS…
370 [1](8f10403960559) "S\-005442ba00003080"[12] # lid 10 lmc 1 "ISR9024 Voltaire" l…
378 displayed as "Non\-Chassis Nodes". External ports are also shown on the
439 \-\-enable\-compat\-utils is specified at build time.