Lines Matching +full:a +full:- +full:f
2 . it 1 an-trap
6 .ds B-Font [CB]
7 .ds I-Font [CI]
8 .ds R-Font [CR]
10 .ds B-Font B
11 .ds I-Font I
12 .ds R-Font R
15 .\" EDIT THIS FILE WITH CAUTION (in-mem file)
17 .\" It has been AutoGen-ed May 25, 2024 at 12:04:19 AM by AutoGen 5.18.16
18 .\" From the definitions ntpdc-opts.def
19 .\" and the template file agman-cmd.tpl
21 \f\*[B-Font]ntpdc\fP
22 \- vendor-specific NTPD control program
24 \f\*[B-Font]ntpdc\fP
26 [\f\*[B-Font]\-flags\f[]]
27 [\f\*[B-Font]\-flag\f[] [\f\*[I-Font]value\f[]]]
28 [\f\*[B-Font]\-\-option-name\f[][[=| ]\f\*[I-Font]value\f[]]]
34 \f\*[B-Font]ntpdc\fP
37 \fCntpq\f[]\fR(1ntpqmdoc)\f[] instead \- it can do everything
38 \f\*[B-Font]ntpdc\fP
39 used to do, and it does so using a much more sane interface.
43 \f\*[B-Font]ntpdc\fP
44 is a utility program used to query
45 \fCntpd\f[]\fR(1ntpdmdoc)\f[]
54 \f\*[B-Font]ntpdc\fP
59 \f\*[B-Font]ntpdc\fP.
62 .NOP \f\*[B-Font]\-4\f[], \f\*[B-Font]\-\-ipv4\f[]
70 .NOP \f\*[B-Font]\-6\f[], \f\*[B-Font]\-\-ipv6\f[]
78 .NOP \f\*[B-Font]\-c\f[] \f\*[I-Font]cmd\f[], \f\*[B-Font]\-\-command\f[]=\f\*[I-Font]cmd\f[]
79 run a command and exit.
86 .NOP \f\*[B-Font]\-d\f[], \f\*[B-Font]\-\-debug\-level\f[]
91 .NOP \f\*[B-Font]\-D\f[] \f\*[I-Font]number\f[], \f\*[B-Font]\-\-set\-debug\-level\f[]=\f\*[I-Font]number\f[]
97 .NOP \f\*[B-Font]\-i\f[], \f\*[B-Font]\-\-interactive\f[]
105 .NOP \f\*[B-Font]\-l\f[], \f\*[B-Font]\-\-listpeers\f[]
106 Print a list of the peers.
110 Print a list of the peers known to the server as well as a summary of
113 .NOP \f\*[B-Font]\-n\f[], \f\*[B-Font]\-\-numeric\f[]
116 Output all host addresses in dotted-quad numeric format rather than
119 .NOP \f\*[B-Font]\-p\f[], \f\*[B-Font]\-\-peers\f[]
120 Print a list of the peers.
124 Print a list of the peers known to the server as well as a summary
127 .NOP \f\*[B-Font]\-s\f[], \f\*[B-Font]\-\-showpeers\f[]
128 Show a list of the peers.
132 Print a list of the peers known to the server as well as a summary
135 .NOP \f\*[B-Font]\-u\f[], \f\*[B-Font]\-\-unconnected\f[]
141 .NOP \f\*[B-Font]\-\&?\f[], \f\*[B-Font]\-\-help\f[]
144 .NOP \f\*[B-Font]\-\&!\f[], \f\*[B-Font]\-\-more-help\f[]
145 Pass the extended usage information through a pager.
147 .NOP \f\*[B-Font]\->\f[] [\f\*[I-Font]cfgfile\f[]], \f\*[B-Font]\-\-save-opts\f[] [=\f\*[I-Font]cfgfile\f[]]
152 .NOP \f\*[B-Font]\-<\f[] \f\*[I-Font]cfgfile\f[], \f\*[B-Font]\-\-load-opts\f[]=\f\*[I-Font]cfgfile\f[], \f\*[B-Font]\-\-no-load-opts\f[]
154 The \fIno-load-opts\fP form will disable the loading
155 of earlier config/rc/ini files. \fI\-\-no-load-opts\fP is handled early,
158 .NOP \f\*[B-Font]\-\-version\f[] [{\f\*[I-Font]v|c|n\f[]}]
159 Output version of program and exit. The default mode is `v', a simple
168 \fBNTPDC_<option-name>\fP or \fBNTPDC\fP
179 \f\*[B-Font]ntpdc\fP
185 \f\*[B-Font]ntpdc\fP
191 \f\*[B-Font]ntpdc\fP
193 commands if the standard input is a terminal device.
198 \f\*[B-Font]ntpdc\fP
202 Note that since NTP is a UDP protocol
206 \f\*[B-Font]ntpdc\fP
209 the remote host is not heard from within a suitable timeout
215 \f\*[B-Font]ntpdc\fP
218 \fCntpd\f[]\fR(1ntpdmdoc)\f[]
221 Requests from a remote
222 \f\*[B-Font]ntpdc\fP
225 both the remote program and local server share a common key and key
230 Note that in contexts where a host name is expected, a
231 \f\*[B-Font]\-4\f[]
233 while a
234 \f\*[B-Font]\-6\f[]
236 Specifying a command line option other than
237 \f\*[B-Font]\-i\f[]
239 \f\*[B-Font]\-n\f[]
243 \f\*[B-Font]ntpdc\fP
248 Interactive format commands consist of a keyword followed by zero
252 The output of a
254 output of individual commands may be sent to a file by appending a
256 followed by a file name, to the command line.
260 A number of interactive format commands are executed entirely
262 \f\*[B-Font]ntpdc\fP
264 mode 7 requests being sent to a server.
268 .NOP \f\*[B-Font]\&?\f[] \f\*[I-Font]command_keyword\f[]
270 .NOP \f\*[B-Font]help\f[] \f\*[I-Font]command_keyword\f[]
271 A
272 \[oq]\f\*[B-Font]\&?\f[]\[cq]
273 will print a list of all the command
275 \f\*[B-Font]ntpdc\fP.
276 A
277 \[oq]\f\*[B-Font]\&?\f[]\[cq]
278 followed by a command keyword will print function and usage
280 This command is probably a better
282 \fCntpq\f[]\fR(1ntpqmdoc)\f[]
286 .NOP \f\*[B-Font]delay\f[] \f\*[I-Font]milliseconds\f[]
287 Specify a time interval to be added to timestamps included in
296 .NOP \f\*[B-Font]host\f[] \f\*[I-Font]hostname\f[]
299 be either a host name or a numeric address.
301 .NOP \f\*[B-Font]hostnames\f[] [\f\*[B-Font]yes\f[] | \f\*[B-Font]no\f[]]
303 \f\*[B-Font]yes\f[]
307 \f\*[B-Font]no\f[]
311 \f\*[B-Font]yes\f[],
314 \f\*[B-Font]\-n\f[]
317 .NOP \f\*[B-Font]keyid\f[] \f\*[I-Font]keyid\f[]
318 This command allows the specification of a key number to be
321 to a key number the server has been configured to use for this
324 .NOP \f\*[B-Font]quit\f[]
326 \f\*[B-Font]ntpdc\fP.
328 .NOP \f\*[B-Font]passwd\f[]
329 This command prompts you to type in a password (which will not
336 .NOP \f\*[B-Font]timeout\f[] \f\*[I-Font]milliseconds\f[]
337 Specify a timeout period for responses to server queries.
341 \f\*[B-Font]ntpdc\fP
342 retries each query once after a timeout, the total waiting time for
343 a timeout will be twice the timeout value set.
348 These are read-only commands
352 .NOP \f\*[B-Font]listpeers\f[]
353 Obtains and prints a brief list of the peers for which the
360 .NOP \f\*[B-Font]peers\f[]
361 Obtains a list of peers for which the server is maintaining
362 state, along with a summary of that state.
365 address (0.0.0.0 if a local address has yet to be determined), the
366 stratum of the remote peer (a stratum of 16 indicates the remote
375 A
377 denotes symmetric active, a
378 \[oq]\&-\[cq]
379 indicates symmetric passive, a
382 remote server is being polled in client mode, a
384 indicates that the server is broadcasting to this address, a
386 denotes that the remote peer is sending broadcasts and a
388 denotes that the remote peer is sending broadcasts and a
397 be a host name, an IP address, a reference clock implementation
399 \fBREFCLK\f[]\fR()\f[]
401 \f\*[B-Font]hostnames\f[]
402 \f\*[B-Font]no\f[]
403 only IP-addresses
406 .NOP \f\*[B-Font]dmpeers\f[]
407 A slightly different peer summary list.
410 \f\*[B-Font]peers\f[]
415 A
418 detection, while a
422 A
427 .NOP \f\*[B-Font]showpeer\f[] \f\*[I-Font]peer_address\f[] [\f\*[I-Font]...\f[]]
428 Shows a detailed display of the current peer variables for one
433 .NOP \f\*[B-Font]pstats\f[] \f\*[I-Font]peer_address\f[] [\f\*[I-Font]...\f[]]
434 Show per-peer statistic counters associated with the specified
437 .NOP \f\*[B-Font]clockstat\f[] \f\*[I-Font]clock_peer_address\f[] [\f\*[I-Font]...\f[]]
438 Obtain and print information concerning a peer clock.
443 .NOP \f\*[B-Font]kerninfo\f[]
444 Obtain and print kernel phase-lock loop operating parameters.
446 modified for a precision timekeeping function.
448 .NOP \f\*[B-Font]loopinfo\f[] [\f\*[B-Font]oneline\f[] | \f\*[B-Font]multiline\f[]]
459 is the frequency error of the local clock in parts-per-million
464 phase-lock loop and thus the speed at which it can adapt to
472 \f\*[B-Font]oneline\f[]
474 \f\*[B-Font]multiline\f[]
477 \f\*[B-Font]multiline\f[]
481 .NOP \f\*[B-Font]sysinfo\f[]
482 Print a variety of system state variables, i.e., state related
485 in the NTP Version 3 specification, RFC-1305.
493 \f\*[B-Font]enable\f[]
495 \f\*[B-Font]disable\f[]
499 \f\*[B-Font]auth\f[],
500 \f\*[B-Font]bclient\f[],
501 \f\*[B-Font]monitor\f[],
502 \f\*[B-Font]pll\f[],
503 \f\*[B-Font]pps\f[]
505 \f\*[B-Font]stats\f[]
508 \fCntpd\f[]\fR(1ntpdmdoc)\f[]
512 \f\*[B-Font]kernel_pll\f[]
514 \f\*[B-Font]kernel_pps\f[].
534 initially decrease from as high as 500 ppm to a nominal value in
539 \fIkern.clockrate.tick\f[]
549 \f\*[B-Font]broadcastdelay\f[]
558 \f\*[B-Font]authdelay\f[]
561 .NOP \f\*[B-Font]sysstats\f[]
565 .NOP \f\*[B-Font]memstats\f[]
569 .NOP \f\*[B-Font]iostats\f[]
570 Print statistics counters maintained in the input-output
573 .NOP \f\*[B-Font]timerstats\f[]
577 .NOP \f\*[B-Font]reslist\f[]
583 .NOP \f\*[B-Font]monlist\f[] [\f\*[I-Font]version\f[]]
589 .NOP \f\*[B-Font]clkbug\f[] \f\*[I-Font]clock_peer_address\f[] [\f\*[I-Font]...\f[]]
590 Obtain debugging information for a reference clock driver.
593 undecodable without a copy of the driver source in hand.
597 authenticated by the server using a configured NTP key (the
598 facility can also be disabled by the server by not configuring a
602 \f\*[B-Font]ntpdc\fP.
604 \f\*[B-Font]keyid\f[]
606 \f\*[B-Font]passwd\f[]
607 commands, the latter of which will prompt at the terminal for a
610 automatically for both the key number and password the first time a
619 Authenticated requests always include a timestamp in the packet
624 If they differ by more than a small amount the request is
634 will work well with a server on the local host, and may work
635 adequately between time-synchronized hosts on the same LAN, it will
647 .NOP \f\*[B-Font]addpeer\f[] \f\*[I-Font]peer_address\f[] [\f\*[I-Font]keyid\f[]] [\f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]]
648 Add a configured peer association at the given address and
655 \f\*[I-Font]keyid\f[]
656 is a
662 \f\*[I-Font]version\f[]
665 \f\*[B-Font]prefer\f[]
666 keyword indicates a preferred peer (and thus will
669 preferred peer also determines the validity of the PPS signal \- if
673 .NOP \f\*[B-Font]addserver\f[] \f\*[I-Font]peer_address\f[] [\f\*[I-Font]keyid\f[]] [\f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]]
677 .NOP \f\*[B-Font]broadcast\f[] \f\*[I-Font]peer_address\f[] [\f\*[I-Font]keyid\f[]] [\f\*[I-Font]version\f[]] [\f\*[B-Font]prefer\f[]]
680 In this case a valid key identifier and key are
683 \f\*[I-Font]peer_address\f[]
685 address of the local network or a multicast group address assigned
687 If a multicast address, a multicast-capable kernel is
690 .NOP \f\*[B-Font]unconfig\f[] \f\*[I-Font]peer_address\f[] [\f\*[I-Font]...\f[]]
699 .NOP \f\*[B-Font]fudge\f[] \f\*[I-Font]peer_address\f[] [\f\*[B-Font]time1\f[]] [\f\*[B-Font]time2\f[]] [\f\*[I-Font]stratum\f[]] [\f\*[I-Font]refid\f[]]
700 This command provides a way to set certain data for a reference
704 .NOP \f\*[B-Font]enable\f[] [\f\*[B-Font]auth\f[] | \f\*[B-Font]bclient\f[] | \f\*[B-Font]calibrate\f[] | \f\*[B-Font]kernel\f[] | \f\*[B-Font]monitor\f[] | \f\*[B-Font]ntp\f[] | \f\*[B-Font]pps\f[] | \f\*[B-Font]stats\f[]]
706 .NOP \f\*[B-Font]disable\f[] [\f\*[B-Font]auth\f[] | \f\*[B-Font]bclient\f[] | \f\*[B-Font]calibrate\f[] | \f\*[B-Font]kernel\f[] | \f\*[B-Font]monitor\f[] | \f\*[B-Font]ntp\f[] | \f\*[B-Font]pps\f[] | \f\*[B-Font]stats\f[]]
708 \f\*[B-Font]enable\f[]
710 \f\*[B-Font]disable\f[]
712 \fCntpd\f[]\fR(1ntpdmdoc)\f[].
715 .NOP \f\*[B-Font]auth\f[]
721 .NOP \f\*[B-Font]bclient\f[]
722 Enables the server to listen for a message from a broadcast or
727 .NOP \f\*[B-Font]calibrate\f[]
731 .NOP \f\*[B-Font]kernel\f[]
735 .NOP \f\*[B-Font]monitor\f[]
738 \f\*[B-Font]monlist\f[]
742 .NOP \f\*[B-Font]ntp\f[]
748 .NOP \f\*[B-Font]pps\f[]
749 Enables the pulse-per-second (PPS) signal when frequency
752 "A Kernel Model for Precision Timekeeping"
755 \fI/usr/share/doc/ntp\f[])
759 .NOP \f\*[B-Font]stats\f[]
762 \fIMonitoring\f[] \fIOptions\f[]
764 \fCntp.conf\f[]\fR(5)\f[]
769 .NOP \f\*[B-Font]restrict\f[] \f\*[I-Font]address\f[] \f\*[I-Font]mask\f[] \f\*[I-Font]flag\f[] [\f\*[I-Font]...\f[]]
771 \f\*[B-Font]restrict\f[]
773 \fCntpd\f[]\fR(1ntpdmdoc)\f[].
775 .NOP \f\*[B-Font]unrestrict\f[] \f\*[I-Font]address\f[] \f\*[I-Font]mask\f[] \f\*[I-Font]flag\f[] [\f\*[I-Font]...\f[]]
778 .NOP \f\*[B-Font]delrestrict\f[] \f\*[I-Font]address\f[] \f\*[I-Font]mask\f[] [\f\*[B-Font]ntpport\f[]]
781 .NOP \f\*[B-Font]readkeys\f[]
783 a new set to be obtained by rereading the keys file (which must
785 \fCntpd\f[]\fR(1ntpdmdoc)\f[]
791 .NOP \f\*[B-Font]trustedkey\f[] \f\*[I-Font]keyid\f[] [\f\*[I-Font]...\f[]]
793 .NOP \f\*[B-Font]untrustedkey\f[] \f\*[I-Font]keyid\f[] [\f\*[I-Font]...\f[]]
795 \f\*[B-Font]trustedkey\f[]
797 \f\*[B-Font]untrustedkey\f[]
800 \fCntpd\f[]\fR(1ntpdmdoc)\f[].
802 .NOP \f\*[B-Font]authinfo\f[]
807 .NOP \f\*[B-Font]traps\f[]
812 .NOP \f\*[B-Font]addtrap\f[] \f\*[I-Font]address\f[] [\f\*[I-Font]port\f[]] [\f\*[I-Font]interface\f[]]
813 Set a trap for asynchronous messages.
817 .NOP \f\*[B-Font]clrtrap\f[] \f\*[I-Font]address\f[] [\f\*[I-Font]port\f[]] [\f\*[I-Font]interface\f[]]
818 Clear a trap for asynchronous messages.
822 .NOP \f\*[B-Font]reset\f[]
840 A specified configuration file could not be loaded.
844 it to autogen-users@lists.sourceforge.net. Thank you.
847 \fCntp.conf\f[]\fR(5)\f[],
848 \fCntpd\f[]\fR(1ntpdmdoc)\f[]
857 Copyright (C) 1992-2024 The University of Delaware and Network Time Foundation all rights reserved.
861 \f\*[B-Font]ntpdc\fP
862 utility is a crude hack.
879 This manual page was \fIAutoGen\fP-erated from the \fBntpdc\fP