Lines Matching full:dd
34 <dd>Force DNS resolution of following host names on the command line to the IPv4 namespace.</dd>
36 <dd>Force DNS resolution of following host names on the command line to the IPv6 namespace.</dd>
38 …dd>The following argument is interpreted as an interactive format command and is added to the list…
40 <dd>Turn on debugging mode.
42 …<dd>Force <tt>ntpdc</tt> to operate in interactive mode. Prompts will be written to the standard o…
44 …<dd>Obtain a list of peers which are known to the server(s). This switch is equivalent to <tt>-c l…
46 …<dd>Output all host addresses in dotted-quad numeric format rather than converting to the canonica…
48 …<dd>Print a list of the peers known to the server as well as a summary of their state. This is equ…
50 …dd>Print a list of the peers known to the server as well as a summary of their state, but in a sli…
58 …dd>A <tt>?</tt> by itself will print a list of all the command keywords known to this incarnation …
60 …dd>Specify a time interval to be added to timestamps included in requests which require authentica…
62 …<dd>Set the host to which future queries will be sent. Hostname may be either a host name or a num…
64 …dd>If <tt>yes</tt> is specified, host names are printed in information displays. If <tt>no</tt> is…
66 <dd>This command allows the specification of a
74 be used.</dd>
76 <dd>Exit <tt>ntpdc</tt>.</dd>
78 …<dd>This command prompts you to type in a password (which will not be echoed) which will be used t…
79 It follows the same rules as a password entry in the keys file of <tt>ntpd</tt>.</dd>
81 …dd>Specify a timeout period for responses to server queries. The default is about 8000 millisecond…
87 …dd>Obtains and prints a brief list of the peers for which the server is maintaining state. These s…
89 …dd>Obtains a list of peers for which the server is maintaining state, along with a summary of that…
90 …dd>The character in the left margin indicates the mode this peer entry is operating in. A <tt>+</t…
91 …dd>The contents of the host field may be one of four forms. It may be a host name, an IP address, …
93 …dd>A slightly different peer summary list. Identical to the output of the <tt>peers</tt> command, …
95 …dd>Shows a detailed display of the current peer variables for one or more peers. Most of these val…
97 <dd>Show per-peer statistic counters associated with the specified peer(s).</dd>
99 …dd>Obtain and print information concerning a peer clock. The values obtained provide information o…
101 …dd>Obtain and print kernel phase-lock loop operating parameters. This information is available onl…
103 …dd>Print the values of selected loop filter variables. The loop filter is the part of NTP which de…
105 …dd>Print a variety of system state variables, i.e., state related to the local server. All except …
106 …dd>The <tt>system flags</tt> show various system flags, some of which can be set and cleared by th…
107 …<dd>Note that some directives, like <tt>enable pps</tt>, are only supported on certain versions of…
108 …dd>The <tt>stability</tt> is the residual frequency error remaining after the system frequency cor…
109 …<dd>The <tt>broadcastdelay</tt> shows the default broadcast delay, as set by the <tt>broadcastdela…
110 …<dd>The <tt>authdelay</tt> shows the default authentication delay, as set by the <tt>authdelay</tt…
112 <dd>Print statistics counters maintained in the protocol module.</dd>
114 <dd>Print statistics counters related to memory allocation code.</dd>
116 <dd>Print statistics counters maintained in the input-output module.</dd>
118 <dd>Print statistics counters maintained in the timer/event queue support code.</dd>
120 …dd>Obtain and print the server's restriction list. This list is (usually) printed in sorted order …
122 <dd>List interface statistics for interfaces used by ntpd for network communication.</dd>
124 …dd>Force rescan of current system interfaces. Outputs interface statistics for interfaces that cou…
126 …dd>Obtain and print traffic counts collected and maintained by the monitor facility. The version n…
128 …dd>Obtain debugging information for a reference clock driver. This information is provided only by…
137 <dd>Add a configured peer association at the given address and operating in symmetric
140 …es appear (e.g. WLAN/PPP interfaces) at a later time and thus render the association operable.</dd>
142 <dd>Identical to the addpeer command, except that the operating mode is client.</dd>
144 …dd>Identical to the addpeer command, except that the operating mode is broadcast. In this case a v…
146 …dd>This command causes the configured bit to be removed from the specified peer(s). In many cases …
148 …<dd>This command provides a way to set certain data for a reference clock. See the source listing …
151 …dd>These commands operate in the same way as the <tt>enable</tt> and <tt>disable</tt> configuratio…
153 …<dd>This command operates in the same way as the <tt>restrict</tt> configuration file commands of …
155 <dd>Unrestrict the matching entry from the restrict list.</dd>
157 <dd>Delete the matching entry from the restrict list.</dd>
159 …dd>Causes the current set of authentication keys to be purged and a new set to be obtained by rere…
162 …<dd>These commands operate in the same way as the <tt>trustedkey</tt> and <tt>untrustedkey</tt> co…
164 …<dd>Returns information concerning the authentication module, including known keys and counts of e…
166 <dd>Display the traps set in the server. See the source listing for further information.</dd>
168 <dd>Set a trap for asynchronous messages. See the source listing for further information.</dd>
170 <dd>Clear a trap for asynchronous messages. See the source listing for further information.</dd>
172 …<dd>Clear the statistics counters in various modules of the server. See the source listing for fur…