Lines Matching +full:clock +full:- +full:accuracy

1 HP e3000 MPE/iX NTP Hints - May 29, 2001
2 ----------------------------------------
8 NTP was re-ported to MPE in May 2001.  What follows are hints learned from
12 MPE lacks the clock-related APIs expected by NTP, so adjtime(), gettimeofday(),
16 Unfortunately the implementation of adjtime() has exposed a sub-second accuracy
22 This bug has a side-effect whereby the ntpd daemon will screw up the hardware
23 PDC clock time by many minutes if used for continuous clock adjustments or in
24 the one-time -q mode.  But note that you can safely run ntpd in order to become
27 The one-time clock adjustment functionality of ntpdate and ntp_timeset is not
28 affected by this bug side-effect.  You can safely use these commands to alter
29 your system time with reasonable accuracy.
31 The only reference clock that has been tested on MPE is the local clock.  So
32 building NTP with --disable-all-clocks --enable-LOCAL_CLOCK is strongly
36 network port (123) and to access the low-level clock functions.
42 place for asking MPE-specific questions about NTP is the HP3000-L mailing list
43 at http://raven.utc.edu/Archives/hp3000-l.html or the associated Usenet