Lines Matching +full:pre +full:- +full:clocks
1 <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
6 <meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
14 <!-- #BeginDate format:En2m -->27-Jan-2014 05:31<!-- #EndDate -->
21 Serial Port: /dev/refclock-<em>u</em>; TTY mode according to clock type<br>
22 …PPS device: /dev/refclockpps-<em>u</em>; alternate PPS device (if not available via the serial por…
24 …The PARSE driver supports 20 different clock types/configurations. PARSE is actually a multi-clock…
27 …d as a configuration option. The PPS configuration option uses the receiver-generated time stamps…
47 <dd>The difference between the RS-232-derived timestamp and the PPS timestamp.</dd>
52 …ently, twenty-four clock types are supported by the PARSE driver and up to four (devices /dev/refc…
55 …e clocks - donations to (<a href="mailto:kardel%20%3CAT%3E%20ntp.org">kardel <AT> ntp.org</a…
59 …ceivers have a seemingly unlimited number of ways to draw power from the RS-232 port and to enco…
61 <li><a href="http://www.meinberg.de">Meinberg clocks</a>
62 … have been verified by the Meinberg people themselves and I have access to one of these clocks.</p>
65 Laboratories SEL-240x clocks</a>
68 has an SEL-2407 in one of its development labs.</p>
76 <li><strong>server 127.127.8.0-3 mode 0</strong>
77 …erg</a> <a href="http://www.meinberg.de/english/products/timesource.htm#dcf---freq_sync">PZF5xx re…
81 <li><strong>server 127.127.8.0-3 mode 1</strong>
82 …erg</a> <a href="http://www.meinberg.de/english/products/timesource.htm#dcf---freq_sync">PZF5xx re…
83 …<a href="http://www.meinberg.de/english/products/pzf-eurocard.htm"><img src="../pic/pzf511.jpg" al…
87 <li><a name="mode2"></a><strong>server 127.127.8.0-3 mode 2</strong>
92 …einberg.de/english/products/gps-pcicard.htm">the GPS PCI card</a> or <a href="http://www.meinberg.…
96 <li><strong>server 127.127.8.0-3 mode 3</strong>
101 <li><strong>server 127.127.8.0-3 mode 4</strong>
106 <li><strong>server 127.127.8.0-3 mode 5</strong>
111 <li><strong>server 127.127.8.0-3 mode 6</strong>
116 <li><strong>server 127.127.8.0-3 mode 7</strong>
117 …erg</a> <a href="http://www.meinberg.de/english/products/timesource.htm#gps---freq_sync">GPS16x/GP…
118 …<a href="http://www.meinberg.de/english/products/gps-eurocard.htm"><img src="../pic/gps167.jpg" al…
122 …S receiver status information is also read. However, this requires a point-to-point connection. <a…
127 <li><strong>server 127.127.8.0-3 mode 8</strong>
133 <li><strong>server 127.127.8.0-3 mode 9</strong>
138 <li><strong>server 127.127.8.0-3 mode 10</strong>
140 …/omprod.cgi/pd_om011.html"><img src="../pic/pd_om011.gif" alt="Image SVeeSix-CM3" align="top" bord…
141 …i/omprod.cgi/pd_om006.html"><img src="../pic/pd_om006.gif" alt="Image Lassen-SK8" border="0" heigh…
145 <li><strong>server 127.127.8.0-3 mode 11</strong>
146 <p><strong>Radiocode Clocks Ltd RCC 8000 Intelligent Off-Air Master Clock support </strong><br>
150 <li><strong>server 127.127.8.0-3 mode 12</strong>
151 …<p><strong><a href="http://www.hopf-time.com">HOPF</a> <a href="http://www.hopf-time.com/kart6021.…
152 …<a href="http://www.hopf-time.com/engl/kart6021.html"><img src="../pic/fg6021.gif" alt="Image DCF7…
156 <li><strong>server 127.127.8.0-3 mode 13</strong>
161 <li><strong>server 127.127.8.0-3 mode 14</strong>
166 <li><strong>server 127.127.8.0-3 mode 15</strong>
167 <p><strong>WHARTON 400A Series Clocks with a 404.2 Serial Interface</strong><br>
171 <li><strong>server 127.127.8.0-3 mode 16</strong>
176 <li><strong>server 127.127.8.0-3 mode 17</strong>
181 <li><a name="mode18"></a><strong>server 127.127.8.0-3 mode 18</strong>
182 …erg </a><a href="http://www.meinberg.de/english/products/timesource.htm#gps---freq_sync">GPS16x/GP…
189 <li><strong>server 127.127.8.0-3 mode 19</strong>
190 <p><strong>Gude Analog- und Digitalsystem GmbH 'Expert mouseCLOCK USB v2.0'</strong><br>
194 <li><strong>server 127.127.8.0-3 mode 20</strong>
197 …<p>Driving the DCF clocks at 75 baud may help to get them to work with a bunch of common USB ser…
200 <li><strong>server 127.127.8.0-3 mode 21</strong>
206 <li><strong>server 127.127.8.0-3 mode 22</strong>
210 <li><strong>server 127.127.8.0-3 mode 23</strong>
214 <li><strong>server 127.127.8.0-3 mode 24</strong>
219 …<p>Actual data formats and setup requirements of the various clocks can be found in <a href="../pa…
223 …ia a level converter to the RXD pin of an RS-232 serial port (pin 3 of a 25-pin connector or pin …
224 …ia a level converter to the DCD pin of an RS-232 serial port (pin 8 of a 25-pin connector or pin …
228 …roviding the serial communication (/dev/refclock-{0..3}), this device is configured as /dev/refcl…
233 …pre> ntpq> as ind assID status conf reach auth condition last_event cnt ==============…
234 …w output. This may be required because of display limitations in ntpq/ntpd - so large lists need …
235 <pre> ntpq> raw Output set to raw </pre>
237 <pre> ntpq> cv 19557 clock_var_list </pre>
239 …pre> assID=19557 status=0x0000, clock_var_list="type,timecode,poll,noreply,badformat,baddata,f…
241 …pre> ntpq> cv 19557 refclock_status,refclock_format,refclock_states,refclock_id, refclock_i…
243 …pre> status=0x0003, refclock_status="UTC DISPLAY; TIME CODE; PPS; POSITION; (LEAP INDICATION; …
265 …lete next leap second instead of adding it. (You'll need to wait a bit for that to happen 8-) </dd>
269 …as been designed for use with Sun systems under SunOS 4.1.x or Solaris 2.3 - 2.8. It can be linke…
271 <h4>Making your own PARSE clocks</h4>
272 …P reference clocks work. For a short description of how to build parse reference clocks, see <a h…