Lines Matching +full:com +full:- +full:mode
1 <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
6 <meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
14 <!-- #BeginDate format:En2m -->27-Jan-2014 05:31<!-- #EndDate -->
21 Serial Port: /dev/refclock-<em>u</em>; TTY mode according to clock type<br>
22 …PPS device: /dev/refclockpps-<em>u</em>; alternate PPS device (if not available via the serial por…
24 …The PARSE driver supports 20 different clock types/configurations. PARSE is actually a multi-clock…
27 …d as a configuration option. The PPS configuration option uses the receiver-generated time stamps…
47 <dd>The difference between the RS-232-derived timestamp and the PPS timestamp.</dd>
52 …<p>Currently, twenty-four clock types are supported by the PARSE driver and up to four (devices /d…
55 …locks - donations to (<a href="mailto:kardel%20%3CAT%3E%20ntp.org">kardel <AT> ntp.org</a>) …
59 …ceivers have a seemingly unlimited number of ways to draw power from the RS-232 port and to enco…
64 <li><a href="http://www.selinc.com">Schweitzer Engineering
65 Laboratories SEL-240x clocks</a>
68 has an SEL-2407 in one of its development labs.</p>
76 <li><strong>server 127.127.8.0-3 mode 0</strong>
77 …erg</a> <a href="http://www.meinberg.de/english/products/timesource.htm#dcf---freq_sync">PZF5xx re…
81 <li><strong>server 127.127.8.0-3 mode 1</strong>
82 …erg</a> <a href="http://www.meinberg.de/english/products/timesource.htm#dcf---freq_sync">PZF5xx re…
83 …<a href="http://www.meinberg.de/english/products/pzf-eurocard.htm"><img src="../pic/pzf511.jpg" al…
87 <li><a name="mode2"></a><strong>server 127.127.8.0-3 mode 2</strong>
91 <p>This mode expects the Meinberg standard time string format with 9600/7E2.</p>
92 …mode 2 must also be used for <a href="http://www.meinberg.de/english/products/formfactor.htm#slot_…
96 <li><strong>server 127.127.8.0-3 mode 3</strong>
101 <li><strong>server 127.127.8.0-3 mode 4</strong>
106 <li><strong>server 127.127.8.0-3 mode 5</strong>
111 <li><strong>server 127.127.8.0-3 mode 6</strong>
116 <li><strong>server 127.127.8.0-3 mode 7</strong>
117 …erg</a> <a href="http://www.meinberg.de/english/products/timesource.htm#gps---freq_sync">GPS16x/GP…
118 …<a href="http://www.meinberg.de/english/products/gps-eurocard.htm"><img src="../pic/gps167.jpg" al…
120 …<p>This mode expects either the University of Erlangen time string format or the Meinberg standard…
122 …mode some additional GPS receiver status information is also read. However, this requires a point-…
123 …mode 7 must not be used with Meinberg PCI cards; use <a href="imap://mills@mail.eecis.udel.edu:993…
127 <li><strong>server 127.127.8.0-3 mode 8</strong>
133 <li><strong>server 127.127.8.0-3 mode 9</strong>
134 …<p><strong><a href="http://www.trimble.com">Trimble</a> <a href="http://www.trimble.com/cgi/omprod…
138 <li><strong>server 127.127.8.0-3 mode 10</strong>
139 …<p><strong><a href="http://www.trimble.com">Trimble</a> <a href="http://www.trimble.com/cgi/omprod…
140 …<a href="http://www.trimble.com/cgi/omprod.cgi/pd_om011.html"><img src="../pic/pd_om011.gif" alt="…
141 …<a href="http://www.trimble.com/cgi/omprod.cgi/pd_om006.html"><img src="../pic/pd_om006.gif" alt="…
145 <li><strong>server 127.127.8.0-3 mode 11</strong>
146 <p><strong>Radiocode Clocks Ltd RCC 8000 Intelligent Off-Air Master Clock support </strong><br>
150 <li><strong>server 127.127.8.0-3 mode 12</strong>
151 …<p><strong><a href="http://www.hopf-time.com">HOPF</a> <a href="http://www.hopf-time.com/kart6021.…
152 …<a href="http://www.hopf-time.com/engl/kart6021.html"><img src="../pic/fg6021.gif" alt="Image DCF7…
156 <li><strong>server 127.127.8.0-3 mode 13</strong>
161 <li><strong>server 127.127.8.0-3 mode 14</strong>
166 <li><strong>server 127.127.8.0-3 mode 15</strong>
171 <li><strong>server 127.127.8.0-3 mode 16</strong>
176 <li><strong>server 127.127.8.0-3 mode 17</strong>
181 <li><a name="mode18"></a><strong>server 127.127.8.0-3 mode 18</strong>
182 …erg </a><a href="http://www.meinberg.de/english/products/timesource.htm#gps---freq_sync">GPS16x/GP…
184 …<p>This mode works without additional data communication (version, GPS status etc.) and thus sho…
185 <p><strong>Note:</strong> mode 18 must not be used with Meinberg PCI cards, use mode 2 instead.<br>
189 <li><strong>server 127.127.8.0-3 mode 19</strong>
190 <p><strong>Gude Analog- und Digitalsystem GmbH 'Expert mouseCLOCK USB v2.0'</strong><br>
194 <li><strong>server 127.127.8.0-3 mode 20</strong>
195 …<p><strong>RAWDCF receiver similar to mode 14, but operating @ 75 baud (DTR=high/RTS=low)</strong>…
200 <li><strong>server 127.127.8.0-3 mode 21</strong>
201 …<p><strong>RAWDCF receiver similar to mode 16, but operating @ 75 baud (DTR=low/RTS=high) </strong…
203 <p>See comment from mode 20 clock. <br>
206 <li><strong>server 127.127.8.0-3 mode 22</strong>
207 <p><strong>MEINBERG, mode 2 but with POWERUP trust </strong><br>
210 <li><strong>server 127.127.8.0-3 mode 23</strong>
211 <p><strong>MEINBERG, mode 7 but with POWERUP trust </strong><br>
214 <li><strong>server 127.127.8.0-3 mode 24</strong>
215 <p><strong><a href="http://www.selinc.com/">Schweitzer Engineering Laboratories</a></strong><br>
223 …ia a level converter to the RXD pin of an RS-232 serial port (pin 3 of a 25-pin connector or pin …
224 …-232 serial port (pin 8 of a 25-pin connector or pin 1 of a 9-pin connector). To select PPS suppo…
227 <p>For PPS to be used, add 128 to the mode parameter.</p>
228 …roviding the serial communication (/dev/refclock-{0..3}), this device is configured as /dev/refcl…
234 …w output. This may be required because of display limitations in ntpq/ntpd - so large lists need …
243 …-4WG14EPU0V1KA", meinberg_antenna_status="RECONNECTED on 2006-07-18 08:13:20.0000000 (+0000) …
265 …lete next leap second instead of adding it. (You'll need to wait a bit for that to happen 8-) </dd>
269 …as been designed for use with Sun systems under SunOS 4.1.x or Solaris 2.3 - 2.8. It can be linke…