Lines Matching +full:clock +full:- +full:mode
1 <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
6 <meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
14 <!-- #BeginDate format:En2m -->27-Jan-2014 05:31<!-- #EndDate -->
21 Serial Port: /dev/refclock-<em>u</em>; TTY mode according to clock type<br>
22 …PPS device: /dev/refclockpps-<em>u</em>; alternate PPS device (if not available via the serial por…
24 …The PARSE driver supports 20 different clock types/configurations. PARSE is actually a multi-clock…
27 …clock support in NTP contains the necessary configuration tables for those receivers. In addition…
28 …see below), as it controls the way ntpd is synchronized to the reference clock, while the hardwar…
31 …<p>The ntpq program can read and display several clock variables. These hold the following informa…
36 <dd>The overall running time and the accumulated times for the clock event states.</dd>
47 <dd>The difference between the RS-232-derived timestamp and the PPS timestamp.</dd>
52 …<p>Currently, twenty-four clock types are supported by the PARSE driver and up to four (devices /d…
55 …locks - donations to (<a href="mailto:kardel%20%3CAT%3E%20ntp.org">kardel <AT> ntp.org</a>) …
59 …ceivers have a seemingly unlimited number of ways to draw power from the RS-232 port and to enco…
65 Laboratories SEL-240x clocks</a>
68 has an SEL-2407 in one of its development labs.</p>
76 <li><strong>server 127.127.8.0-3 mode 0</strong>
77 …erg</a> <a href="http://www.meinberg.de/english/products/timesource.htm#dcf---freq_sync">PZF5xx re…
81 <li><strong>server 127.127.8.0-3 mode 1</strong>
82 …erg</a> <a href="http://www.meinberg.de/english/products/timesource.htm#dcf---freq_sync">PZF5xx re…
83 …<a href="http://www.meinberg.de/english/products/pzf-eurocard.htm"><img src="../pic/pzf511.jpg" al…
87 <li><a name="mode2"></a><strong>server 127.127.8.0-3 mode 2</strong>
91 <p>This mode expects the Meinberg standard time string format with 9600/7E2.</p>
92 …mode 2 must also be used for <a href="http://www.meinberg.de/english/products/formfactor.htm#slot_…
96 <li><strong>server 127.127.8.0-3 mode 3</strong>
101 <li><strong>server 127.127.8.0-3 mode 4</strong>
106 <li><strong>server 127.127.8.0-3 mode 5</strong>
111 <li><strong>server 127.127.8.0-3 mode 6</strong>
116 <li><strong>server 127.127.8.0-3 mode 7</strong>
117 …erg</a> <a href="http://www.meinberg.de/english/products/timesource.htm#gps---freq_sync">GPS16x/GP…
118 …<a href="http://www.meinberg.de/english/products/gps-eurocard.htm"><img src="../pic/gps167.jpg" al…
120 …<p>This mode expects either the University of Erlangen time string format or the Meinberg standard…
122 …mode some additional GPS receiver status information is also read. However, this requires a point-…
123 …mode 7 must not be used with Meinberg PCI cards; use <a href="imap://mills@mail.eecis.udel.edu:993…
127 <li><strong>server 127.127.8.0-3 mode 8</strong>
128 …<p><strong><a href="http://www.igel.de">IGEL</a> <a href="http://www.igel.de/eigelmn.html">clock</…
129 …//www.igel.de/eigelmn.html"><img src="../pic/igclock.gif" alt="Image IGEL clock" border="0" height…
133 <li><strong>server 127.127.8.0-3 mode 9</strong>
138 <li><strong>server 127.127.8.0-3 mode 10</strong>
140 …/omprod.cgi/pd_om011.html"><img src="../pic/pd_om011.gif" alt="Image SVeeSix-CM3" align="top" bord…
141 …i/omprod.cgi/pd_om006.html"><img src="../pic/pd_om006.gif" alt="Image Lassen-SK8" border="0" heigh…
145 <li><strong>server 127.127.8.0-3 mode 11</strong>
146 <p><strong>Radiocode Clocks Ltd RCC 8000 Intelligent Off-Air Master Clock support </strong><br>
150 <li><strong>server 127.127.8.0-3 mode 12</strong>
151 …<p><strong><a href="http://www.hopf-time.com">HOPF</a> <a href="http://www.hopf-time.com/kart6021.…
152 …<a href="http://www.hopf-time.com/engl/kart6021.html"><img src="../pic/fg6021.gif" alt="Image DCF7…
156 <li><strong>server 127.127.8.0-3 mode 13</strong>
157 <p><strong>Diem's Computime Radio Clock</strong><br>
161 <li><strong>server 127.127.8.0-3 mode 14</strong>
166 <li><strong>server 127.127.8.0-3 mode 15</strong>
171 <li><strong>server 127.127.8.0-3 mode 16</strong>
176 <li><strong>server 127.127.8.0-3 mode 17</strong>
181 <li><a name="mode18"></a><strong>server 127.127.8.0-3 mode 18</strong>
182 …erg </a><a href="http://www.meinberg.de/english/products/timesource.htm#gps---freq_sync">GPS16x/GP…
184 …<p>This mode works without additional data communication (version, GPS status etc.) and thus sho…
185 <p><strong>Note:</strong> mode 18 must not be used with Meinberg PCI cards, use mode 2 instead.<br>
189 <li><strong>server 127.127.8.0-3 mode 19</strong>
190 <p><strong>Gude Analog- und Digitalsystem GmbH 'Expert mouseCLOCK USB v2.0'</strong><br>
194 <li><strong>server 127.127.8.0-3 mode 20</strong>
195 …<p><strong>RAWDCF receiver similar to mode 14, but operating @ 75 baud (DTR=high/RTS=low)</strong>…
200 <li><strong>server 127.127.8.0-3 mode 21</strong>
201 …<p><strong>RAWDCF receiver similar to mode 16, but operating @ 75 baud (DTR=low/RTS=high) </strong…
203 <p>See comment from mode 20 clock. <br>
206 <li><strong>server 127.127.8.0-3 mode 22</strong>
207 <p><strong>MEINBERG, mode 2 but with POWERUP trust </strong><br>
210 <li><strong>server 127.127.8.0-3 mode 23</strong>
211 <p><strong>MEINBERG, mode 7 but with POWERUP trust </strong><br>
214 <li><strong>server 127.127.8.0-3 mode 24</strong>
219 … the various clocks can be found in <a href="../parsedata.html">NTP PARSE clock data formats</a>.<…
221 …clock support software carefully monitors the state transitions of the receiver. All state change…
222 …The trust period is dependent on the receiver oscillator and thus is a function of clock type.</p>
223 …-232 serial port (pin 3 of a 25-pin connector or pin 2 of a 9-pin connector). The telegrams are d…
224 …-232 serial port (pin 8 of a 25-pin connector or pin 1 of a 9-pin connector). To select PPS suppo…
227 <p>For PPS to be used, add 128 to the mode parameter.</p>
228 …roviding the serial communication (/dev/refclock-{0..3}), this device is configured as /dev/refcl…
230 …<p>Clock state statistics are written hourly to the syslog service. Online information can be fo…
231 … accessible via clock variables. To find out about additional variable names, query for the clock…
233 … falsetick reachable 5 2 19557 9435 yes yes none candidat clock expt 3 3 195…
234 …w output. This may be required because of display limitations in ntpq/ntpd - so large lists need …
236 <p>Use the cv command to read the list of clock variables of a selected association:</p>
240 …<p>Then use the cv command again to list selected clock variables. The following command must be e…
243 …-4WG14EPU0V1KA", meinberg_antenna_status="RECONNECTED on 2006-07-18 08:13:20.0000000 (+0000) …
247 …set calibration factor, in seconds and fraction. The default value depends on the clock type. </dd>
252 <dd>The stratum for this reference clock. </dd>
254 <dd>The refid for this reference clock. </dd>
265 …lete next leap second instead of adding it. (You'll need to wait a bit for that to happen 8-) </dd>
269 …as been designed for use with Sun systems under SunOS 4.1.x or Solaris 2.3 - 2.8. It can be linke…
272 …<p>The parse clock mechanism deviates from the way other NTP reference clocks work. For a short …
274 <p><a href="../refclock.html">Reference Clock Drivers</a></p>