Lines Matching full:pps

22 …PPS device: /dev/refclockpps-<em>u</em>; alternate PPS device (if not available via the serial por…
27 …f a PPS signal is also  provided as a configuration option. The PPS configuration option uses  the…
28 …PPS configuration option is different from the hardware PPS signal,  which is also supported (see …
29     <p>The use of the PPS option requires receivers with an accuracy of better than 1ms.</p>
44     <p>If PPS information is present, additional variables are available:</p>
47       <dd>The difference between the RS-232-derived timestamp and the PPS timestamp.</dd>
49       <dd>The PPS timestamp.</dd>
222 …<p>PPS support is only available  when the receiver is completely synchronized. The receiver is be…
224 …PPS loopfilter control, a true  PPS hardware signal can be utilized via the PPSAPI interface. PPS …
225     <h4>Hardware PPS support<br>
227     <p>For PPS to be used, add 128 to the mode parameter.</p>
228 …PPS signal is fed in from a device different from the device  providing the serial communication (…
233 …  yes  none  candidat  clock expt  3      3 19558  9714   yes   yes  none  pps.peer   reachable  1…
243 …atus=0x0003,    refclock_status="UTC DISPLAY; TIME CODE; PPS; POSITION; (LEAP INDICATION;    PPS S…
249 …<dd> If flag1 is 0, time2 specifies the offset of the PPS signal from the actual time (PPS fine tu…
258       <dd>If 0, the fudge factor time2 refers to the PPS offset. </dd>
261       <dd>If flag2 is 1, sample PPS on CLEAR instead of on ASSERT. </dd>
263       <dd>If flag3 is 1, link kernel PPS tracking to this refclock instance. </dd>