Lines Matching +full:1 +full:br +full:- +full:100
1 <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
6 <meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
14 <!-- #BeginDate format:En2m -->27-Jan-2014 05:31<!-- #EndDate -->
18 Address: 127.127.8.<em>u</em><br>
19 Reference ID: PARSE<br>
20 Driver ID: GENERIC<br>
21 Serial Port: /dev/refclock-<em>u</em>; TTY mode according to clock type<br>
22 …PPS device: /dev/refclockpps-<em>u</em>; alternate PPS device (if not available via the serial por…
24 …river supports 20 different clock types/configurations. PARSE is actually a multi-clock driver.<br>
25 <br>
27 …d as a configuration option. The PPS configuration option uses the receiver-generated time stamps…
29 <p>The use of the PPS option requires receivers with an accuracy of better than 1ms.</p>
47 <dd>The difference between the RS-232-derived timestamp and the PPS timestamp.</dd>
52 …-four clock types are supported by the PARSE driver and up to four (devices /dev/refclock-0 - /dev…
55 …locks - donations to (<a href="mailto:kardel%20%3CAT%3E%20ntp.org">kardel <AT> ntp.org</a>) …
59 …ceivers have a seemingly unlimited number of ways to draw power from the RS-232 port and to enco…
65 Laboratories SEL-240x clocks</a>
68 has an SEL-2407 in one of its development labs.</p>
76 <li><strong>server 127.127.8.0-3 mode 0</strong>
77 …nglish/products/timesource.htm#dcf---freq_sync">PZF5xx receiver family</a> (FM demodulation/TCXO /…
78 <br>
81 <li><strong>server 127.127.8.0-3 mode 1</strong>
82 …nglish/products/timesource.htm#dcf---freq_sync">PZF5xx receiver family</a> (FM demodulation/OCXO /…
83 …lish/products/pzf-eurocard.htm"><img src="../pic/pzf511.jpg" alt="Image PZF511" align="top" border…
84 <br>
87 <li><a name="mode2"></a><strong>server 127.127.8.0-3 mode 2</strong>
88 ….de/english/products/c51.htm">DCF C51 receiver and similar</a> (AM demodulation / 4ms)</strong><br>
89 …><img src="../pic/c51.jpg" alt="Image C51" align="top" border="0" height="239" width="330"></a><br>
92 …-pcicard.htm">the GPS PCI card</a> or <a href="http://www.meinberg.de/english/products/dcf-pcicard…
93 <br>
96 <li><strong>server 127.127.8.0-3 mode 3</strong>
97 <p><strong><a href="http://www.elv.de">ELV</a> DCF7000 (sloppy AM demodulation / 50ms)</strong><br>
98 <br>
101 <li><strong>server 127.127.8.0-3 mode 4</strong>
102 <p><strong>Walter Schmid DCF receiver Kit (AM demodulation / 1ms)</strong><br>
103 <br>
106 <li><strong>server 127.127.8.0-3 mode 5</strong>
107 <p><strong>RAW DCF77 100/200ms pulses (Conrad DCF77 receiver module / 5ms)</strong><br>
108 <br>
111 <li><strong>server 127.127.8.0-3 mode 6</strong>
112 <p><strong>RAW DCF77 100/200ms pulses (TimeBrick DCF77 receiver module / 5ms)</strong><br>
113 <br>
116 <li><strong>server 127.127.8.0-3 mode 7</strong>
117 …de/english/products/timesource.htm#gps---freq_sync">GPS16x/GPS17x receivers</a> (GPS / <<1&m…
118 …lish/products/gps-eurocard.htm"><img src="../pic/gps167.jpg" alt="Image GPS167" align="top" border…
122 …S receiver status information is also read. However, this requires a point-to-point connection. <a…
123 …3EUID%3E.INBOX%3E67132?part=1.3&type=text/html&filename=driver8.html#mode2">mode 2</a> instead.<br>
124 <br>
127 <li><strong>server 127.127.8.0-3 mode 8</strong>
128 …href="http://www.igel.de">IGEL</a> <a href="http://www.igel.de/eigelmn.html">clock</a></strong><br>
129 …"><img src="../pic/igclock.gif" alt="Image IGEL clock" border="0" height="174" width="200"></a><br>
130 <br>
133 <li><strong>server 127.127.8.0-3 mode 9</strong>
134 …mprod.cgi/pd_om011.html">SVeeSix GPS receiver</a> TAIP protocol (GPS / <<1μs)</strong><br>
135 <br>
138 <li><strong>server 127.127.8.0-3 mode 10</strong>
139 …>SVeeSix GPS receiver</a> TSIP protocol (GPS / <<1μs) (no kernel support yet)</strong><br>
140 …g src="../pic/pd_om011.gif" alt="Image SVeeSix-CM3" align="top" border="0" height="100" width="420…
141 …ml"><img src="../pic/pd_om006.gif" alt="Image Lassen-SK8" border="0" height="100" width="420"></a>…
142 <br>
145 <li><strong>server 127.127.8.0-3 mode 11</strong>
146 <p><strong>Radiocode Clocks Ltd RCC 8000 Intelligent Off-Air Master Clock support </strong><br>
147 <br>
150 <li><strong>server 127.127.8.0-3 mode 12</strong>
151 …ong><a href="http://www.hopf-time.com">HOPF</a> <a href="http://www.hopf-time.com/kart6021.html">F…
152 …pf-time.com/engl/kart6021.html"><img src="../pic/fg6021.gif" alt="Image DCF77 Interface Board" ali…
153 <br>
156 <li><strong>server 127.127.8.0-3 mode 13</strong>
157 <p><strong>Diem's Computime Radio Clock</strong><br>
158 <br>
161 <li><strong>server 127.127.8.0-3 mode 14</strong>
162 <p><strong>RAWDCF receiver (DTR=high/RTS=low)</strong><br>
163 <br>
166 <li><strong>server 127.127.8.0-3 mode 15</strong>
167 <p><strong>WHARTON 400A Series Clocks with a 404.2 Serial Interface</strong><br>
168 <br>
171 <li><strong>server 127.127.8.0-3 mode 16</strong>
172 <p><strong>RAWDCF receiver (DTR=low/RTS=high) </strong><br>
173 <br>
176 <li><strong>server 127.127.8.0-3 mode 17</strong>
177 <p><strong>VARITEXT Receiver (MSF) </strong><br>
178 <br>
181 <li><a name="mode18"></a><strong>server 127.127.8.0-3 mode 18</strong>
182 …de/english/products/timesource.htm#gps---freq_sync">GPS16x/GPS17x receivers</a> (GPS / <<1&m…
185 <p><strong>Note:</strong> mode 18 must not be used with Meinberg PCI cards, use mode 2 instead.<br>
186 <br>
189 <li><strong>server 127.127.8.0-3 mode 19</strong>
190 <p><strong>Gude Analog- und Digitalsystem GmbH 'Expert mouseCLOCK USB v2.0'</strong><br>
191 <br>
194 <li><strong>server 127.127.8.0-3 mode 20</strong>
195 …<strong>RAWDCF receiver similar to mode 14, but operating @ 75 baud (DTR=high/RTS=low)</strong><br>
197 …ial converters, that do 75 but cannot do 50 baud at all, e.g. those based on Prolific PL2303. <br>
200 <li><strong>server 127.127.8.0-3 mode 21</strong>
201 …strong>RAWDCF receiver similar to mode 16, but operating @ 75 baud (DTR=low/RTS=high) </strong><br>
203 <p>See comment from mode 20 clock. <br>
206 <li><strong>server 127.127.8.0-3 mode 22</strong>
207 <p><strong>MEINBERG, mode 2 but with POWERUP trust </strong><br>
210 <li><strong>server 127.127.8.0-3 mode 23</strong>
211 <p><strong>MEINBERG, mode 7 but with POWERUP trust </strong><br>
214 <li><strong>server 127.127.8.0-3 mode 24</strong>
215 <p><strong><a href="http://www.selinc.com/">Schweitzer Engineering Laboratories</a></strong><br>
223 …ia a level converter to the RXD pin of an RS-232 serial port (pin 3 of a 25-pin connector or pin …
224 …ia a level converter to the DCD pin of an RS-232 serial port (pin 8 of a 25-pin connector or pin …
225 <h4>Hardware PPS support<br>
228 …roviding the serial communication (/dev/refclock-{0..3}), this device is configured as /dev/refcl…
230 …ice. Online information can be found by examining the clock variables via the ntpq cv command.<br>
233 …1 19556 9154 yes yes none falsetick reachable 5 2 19557 9435 yes yes none can…
234 …w output. This may be required because of display limitations in ntpq/ntpd - so large lists need …
239 …ge,meinberg_antenna_status,gps_tot_51, gps_tot_63,gps_t0a,gps_cfg[1],gps_health[1],gps_cfg[2],g…
241 …sage,meinberg_antenna_status,gps_tot_51,gps_tot_63,gps_t0a,gps_cfg[1], gps_health[1],gps_cfg[2]…
243 …1 2006 0:00:00.000", gps_message="/PFU3SOP-4WG14EPU0V1KA", meinberg_antenna_status="RECONNE…
250 …<dd> If flag1 is 1, time2 specifies the number of seconds a receiver with a premium local oscilla…
257 <dt>flag1 { 0 | 1 } </dt>
259 <dd>If 1, time2 refers to the TRUST TIME. </dd>
260 <dt>flag2 { 0 | 1 } </dt>
261 <dd>If flag2 is 1, sample PPS on CLEAR instead of on ASSERT. </dd>
262 <dt>flag3 { 0 | 1 } </dt>
263 <dd>If flag3 is 1, link kernel PPS tracking to this refclock instance. </dd>
264 <dt>flag4 { 0 | 1 } </dt>
265 …lete next leap second instead of adding it. (You'll need to wait a bit for that to happen 8-) </dd>
267 Note about auxiliary Sun STREAMS modules (SunOS and Solaris):<br>
269 …as been designed for use with Sun systems under SunOS 4.1.x or Solaris 2.3 - 2.8. It can be linke…