Lines Matching full:burst
37 …burst. As described below, every character is sent twice and, in the case of format A bursts, the …
38 …de is considered valid and the clock set when at least one valid format B burst has been decoded a…
40 <p>The program consists of four major parts: the DSP modem, maximum-likelihood UART, burst assemble…
42 …e maximum-likelihood character. The process then continues for all ten characters in the burst.</p>
43 …burst assembler processes characters either from the maximum-likelihood UART or directly from the …
44 …burst consists of ten characters in two replicated five-character blocks, each block representing …
45 …burst distance is incremented by one for each bit in the first block that matches the correspondin…
47 …burst. In a valid burst, the last digit of the two timecodes in the burst must match and the value…
48 <p>As each digit of a valid burst is processed, the value at the row corresponding to the digit pos…
50 …ours and minutes extracted along with other information from the format B burst, including DST sta…
51 …ter than would otherwise be the case with radio noise, UART jitter and occasional burst errors.</p>
58 … for each format B burst received in second 31, while eight messages beginning with <tt>chuA</tt> …
60 …burst (9-11) and <tt>b</tt> the burst distance (0-40). Good bursts will have spans of a 800 or mor…
99 …t the clock. The format and fram alarm are nonfatal; only the data in the burst are discarded.</dd>