Lines Matching +full:single +full:- +full:tt
1 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
4 <meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
13 <!-- #BeginDate format:En2m -->17-Jul-2014 02:17<!-- #EndDate -->
18 Reference ID: <tt>IRIG</tt><br>
19 Driver ID: <tt>IRIG_AUDIO</tt><br>
20 Audio Device: <tt>/dev/audio</tt> and <tt>/dev/audioctl</tt>
22 …-Range Instrumentation Group (IRIG) standard time distribution signal. This signal is generated by…
23 …-law companding to demodulate the data. This is the same standard as used by the telephone industr…
24 …d 50 Ohms. In such cases the cable should be terminated at the line-in port with a 50-Ohm resistor…
25 … to the PPS signal from a GPS receiver, the mean offset with a 2.4-GHz P4 running FreeBS…
26 …. The Sun kernel driver has a sawtooth modulation with amplitude over 5 ms P-P and period 5.5 s. T…
30 …-modulated carrier with pulse-width modulated data bits. For IRIG-B, the carrier frequency is 1000…
31 …-Hz μ-law companded samples using separate signal filters for IRIG-B and IRIG-E, a comb filter,…
32 …o the corrected slice level determine the width of each pulse and its value - zero, one or positio…
33 …-II phase-lock loop (PLL) performs additional integration and interpolation to accurately determin…
36 <p><tt>00 00 98 23 19:26:52 2782 143 0.694 10 0.3 66.5 3094572411.00027</tt></p>
38 …-3000), codec gain (0-255), modulation index (0-1), time constant (4-10), carrier phase error (0&p…
41 <dt><tt>x01</tt></dt>
43 <dt><tt>x02</tt></dt>
45 <dt><tt>x04</tt></dt>
47 <dt><tt>x08</tt></dt>
49 <dt><tt>x10</tt></dt>
51 <dt><tt>x20</tt></dt>
53 <dt><tt>x40</tt></dt>
55 <dt><tt>x80</tt></dt>
60 <dt><tt>time1 <i>time</i></tt></dt>
62 <dt><tt>time2 <i>time</i></tt></dt>
64 <dt><tt>stratum <i>number</i></tt></dt>
66 <dt><tt>refid <i>string</i></tt></dt>
67 …reference identifier, an ASCII string from one to four characters, with default <tt>IRIG</tt>.</dd>
68 <dt><tt>flag1 0 | 1</tt></dt>
70 <dt><tt>flag2 0 | 1</tt></dt>
71 …<dd>Specifies the microphone port if set to zero or the line-in port if set to one. It does not se…
72 <dt><tt>flag3 0 | 1</tt></dt>
74 <dt><tt>flag4 0 | 1</tt></dt>
75 <dd>Enable verbose <tt>clockstats</tt> recording if set.</dd>