Lines Matching +full:keep +full:- +full:pll +full:- +full:enabled
1 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
4 <meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
13 <!-- #BeginDate format:En2m -->17-Jul-2014 02:17<!-- #EndDate -->
22 …-Range Instrumentation Group (IRIG) standard time distribution signal. This signal is generated by…
23 <p>The driver requires an audio codec or sound card with sampling rate 8 kHz and μ-law compandin…
24 …d 50 Ohms. In such cases the cable should be terminated at the line-in port with a 50-Ohm resistor…
25 … to the PPS signal from a GPS receiver, the mean offset with a 2.4-GHz P4 running FreeBS…
26 …. The Sun kernel driver has a sawtooth modulation with amplitude over 5 ms P-P and period 5.5 s. T…
30 …-modulated carrier with pulse-width modulated data bits. For IRIG-B, the carrier frequency is 1000…
31 …-Hz μ-law companded samples using separate signal filters for IRIG-B and IRIG-E, a comb filter,…
32 …o the corrected slice level determine the width of each pulse and its value - zero, one or positio…
33 …-II phase-lock loop (PLL) performs additional integration and interpolation to accurately determin…
37 <p>If clockstats is enabled, the most recent line is written to the clockstats file every 64 s. If …
38 …-3000), codec gain (0-255), modulation index (0-1), time constant (4-10), carrier phase error (0&p…
54 <dd>Codec error (overrun). The machine is not fast enough to keep up with the codec.</dd>
71 …<dd>Specifies the microphone port if set to zero or the line-in port if set to one. It does not se…