Lines Matching +full:input +full:- +full:analog +full:- +full:gain

1 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
4 <meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
13 <!-- #BeginDate format:En2m -->17-Jul-2014 02:17<!-- #EndDate -->
22-Range Instrumentation Group (IRIG) standard time distribution signal. This signal is generated by…
23 <p>The driver requires an audio codec or sound card with sampling rate 8 kHz and &mu;-law compandin…
24analog signal levels, not digital TTL levels. In most radios the IRIG signal is driven &plusmn;10 …
25 … to the PPS&nbsp;signal from a GPS&nbsp;receiver, the mean offset with a 2.4-GHz P4 running FreeBS…
26 …. The Sun kernel driver has a sawtooth modulation with amplitude over 5 ms P-P and period 5.5 s. T…
27 <p>The driver performs a number of error checks to protect against overdriven or underdriven input
28 …">Radio WWV/H Audio Demodulator/Decoder</a> pages. They include automatic gain control (AGC), sele…
30-modulated carrier with pulse-width modulated data bits. For IRIG-B, the carrier frequency is 1000…
31-Hz &mu;-law companded samples using separate signal filters for IRIG-B and IRIG-E, a comb filter,…
32 …o the corrected slice level determine the width of each pulse and its value - zero, one or positio…
33-II phase-lock loop (PLL) performs additional integration and interpolation to accurately determin…
38-3000), codec gain (0-255), modulation index (0-1), time constant (4-10), carrier phase error (0&p…
42 …amplitude is less than 100 units. This is usually the result of no signal or wrong input port.</dd>
46 …5. This is usually the result of an overdriven codec, wrong signal format or wrong input port.</dd>
71 …<dd>Specifies the microphone port if set to zero or the line-in port if set to one. It does not se…
73 …<dd>Enables audio monitoring of the input signal. For this purpose, the speaker volume must be set…