Lines Matching +full:report +full:- +full:rate +full:- +full:hz
1 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
4 <meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
13 <!-- #BeginDate format:En2m -->15-Nov-2012 06:42<!-- #EndDate -->
20 Autotune Port: <tt>/dev/icom</tt>; 1200/9600 baud, 8-bits, no parity<br>
23 …nected via an optional attenuator and cable to either the microphone or line-in port of a workstat…
24 <p>The driver requires an audio codec or sound card with sampling rate 8 kHz and μ-law compandin…
25 … ray geometry. In Newark DE, 2479 km from the transmitter, the predicted two-hop propagation delay…
26 …r, the mean offset with a 2.4-GHz P4 running FreeBSD 6.1 is generally within 0.1 ms short-term wit…
30 …-kHz μ-law companded codec samples using maximum-likelihood techniques which exploit the consid…
31 …A precision radio clock for WWV transmissions. Electrical Engineering Report 97-8-1, University of…
34 …-Hz pulses and 100-Hz subcarrier are first separated using a 600-Hz bandpass filter centered on 11…
35 …-Hz subcarrier relative to the second pulse is fixed at the transmitter; however, the audio stage …
36 …-width discriminator. The discriminator samples the I channel at 15 ms (<i>n</i>), 200 ms (<i>s</…
37 …-static miscellaneous bits, such as DST indicator, leap second warning and DUT1 correction. In thi…
38 <h4>Maximum-Likelihood Decoder</h4>
39 …ssociated with the maximum over all averaged values then becomes the maximum-likelihood candidate …
40 …-likelihood digit, likelihood vector and other related data. The maximum-likelihood digit for each…
41 …-likelihood digit. If a digit likelihood exceeds the decision level and compares with previous dig…
43 …-lock loop (FLL) which operates independently of the data recovery functions. The maximum value of…
45 …r, the data decoding functions are driven by the epoch. The decoder is phase-locked to the epoch i…
46 … after a long fade. Therefore, a candidate is considered valid only if the 5-ms signal amplitude a…
49 …ry scrap of signal information, but has to be careful to avoid making pseudo-sense of noise alone.…
55 <p>The figure was constructed using a 2.4-GHz P4 running FreeBSD 6.1. For these measurements the co…
56 …he receiver at Newark, DE, varies over 9.0-9.3 ms. In addition, the receiver contributes 4.7 ms an…
65 …-V standard, which is a bidirectional serial bus operating at TTL levels. The bus can be connected…
66 …n. If the <tt>/dev/icom</tt> link is not present or the open fails or the CI-V bus is inoperative,…
67 …metric as described above. Each of the five frequencies are probed in a five-minute rotation to bu…
71 … when the ray path is in moonlight (0100-1300 UTC) and the higher frequencies when the path is in …
73 …r is not disciplining the system clock. If the debugging trace feature (<tt>-d</tt> on the <tt>ntp…
78 … <tt>WH</tt> for WWVH) and frequency (2, 5, 10, 15 or 20), <tt>score</tt> 32-bit shift register re…
79 <pre><tt>wwv5 000d 111 5753 3967/20.1 3523/10.2 WV20 bdeff 100 8348/30.0 WH20 0000 1 22/-12.4</tt><…
85 …re decoded from the received data and are in fixed-length format. The remaining fields are in vari…
90 …<dd>The quality character is a four-bit hexadecimal code showing which alarms have been raised. Ea…
99 …<dd>Compare alarm. A maximum-likelihood digit failed to agree with the current associated clock di…
103 …<dd>The timecode format itself is self explanatory. Since the driver latches the on-time epoch dir…
127 …k was set on the last minute, the AGC is safely in the middle ot the range 0-255, and the receiver…
141 …<dd>Specifies the microphone port if set to zero or the line-in port if set to one. It does not se…