Lines Matching full:pulse
30 … 1000-Hz pulse, which occurs at the beginning of each second, a 800-ms, 1000-Hz pulse, which occur…
34 …pulse is extracted using an 800-ms synchronous matched filter and pulse grooming logic which discr…
35 <p>The phase of the 100-Hz subcarrier relative to the second pulse is fixed at the transmitter; how…
36 …pulse-width discriminator. The discriminator samples the I channel at 15 ms (<i>n</i>), 200 ms (<…
43 …dependently of the data recovery functions. The maximum value of the 5-ms pulse after the comb fil…
49 …pulse amplitude and SNR measured in second 0 of the minute, together with the data subcarrier ampl…
50 …on represents the high order bits of the metric, while the current minute pulse amplitude represen…
62 …k is set, the time and frequency are disciplined only by the second synch pulse and the clock digi…
76 …t> audio gain, <tt>epoch </tt>second epoch, <tt>secamp/secsnr </tt>second pulse amplitude/SNR, and…
78 …>metric</tt> is described above, and <tt>minamp/minsnr</tt> is the minute pulse ampliture/SNR. An …
103 …Since the driver latches the on-time epoch directly from the second synch pulse, the seconds fract…