Lines Matching full:metric

49 … careful to avoid making pseudo-sense of noise alone. The signal quality metric depends on the min…
50 …metric, while the current minute pulse amplitude represents the low order bits. Only if the metric…
58 …encies and both WWV and WWVH stations until finding a station and frequency with acceptable metric.
60 <p>Once the clock is set, it continues to provide correct timecodes as long as the signal metric is…
62 <p>Operation continues as long as the signal metric from at least one station on at least one frequ…
67 …the radio to one of the five broadcast frequencies to measure the signal metric as described above…
68 …metric, ties going first to the highest frequency and then to WWV in order. A station is considere…
77 <p><tt>ident score metric minamp/minsnr</tt></p>
78 …es (0) of the last 32 probes (hits and misses enter from the right), <tt>metric</tt> is described …
83 <p><tt>sq yyyy ddd hh:mm:ss l d du lset agc ident metric errs freq avg<br>
116   <dt><tt>metric</tt></dt>
117   <dd>The signal metric described above from 0 (no signal) to 100 (best).</dd>
119 …with half the bits are in error in any minute, usually by that point the metric drops below thresh…
127 …ng WWV on 20 MHz. Good receiving conditions prevail, as indicated by the metric 86 and 5 bit error…