Lines Matching +full:auto +full:- +full:poll
1 <!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
4 <meta http-equiv="Content-Type" content="text/html;charset=iso-8859-1">
13 <!-- #BeginDate format:En2m -->12-Oct-2017 08:13<!-- #EndDate -->
20 Serial Port: <tt>/dev/acts<i>u</i></tt>; 9600 baud, 8-bits, no parity<br>
22 …Requires: <tt>/usr/include/sys/termios.h</tt> header file with modem control and a dial-out (cua)&…
26 …-bps modem with a Hayes-compatible command set and control over the modem data terminal ready (DTR…
27 … or by a cron job. In auto mode (0) <tt>flag1</tt> is set at each poll event. In backup mode (1) <…
28 …yes ATDT prefix followed by the number itself, including the prefix and long-distance digits and d…
30 … via a modem if the radio is configured to send time codes continuously at 1-s intervals. In princ…
31 … <tt>minpoll</tt> and 17 (36 hours) for <tt>maxpoll</tt>. Ordinarily, the poll interval will start…
35 <p>Phone: (303) 494-4774 (Boulder, CO); (808) 335-4721 (Hawaii)</p>
41 47999 90-04-18 21:39:15 50 0 +.1 045.0 UTC(NIST) *<br>
42 47999 90-04-18 21:39:16 50 0 +.1 045.0 UTC(NIST) #<br>
44 … <tt>UTC(NIST)</tt> are not used by this driver. The <tt><OTM></tt> on-time character "…
46 <p>Phone: (202) 762-1594 (Washington, DC); (719) 567-6743 (Colorado Springs, CO)</p>
47 …o.usno.navy.mil/modem_time.html">Data Format</a> (two lines, repeating at one-second intervals)</p>
49 <p>* on-time character for previous timecode message<br>
57 <p>The received timecode is written as-is to the <tt>clockstats</tt> file along with the Hayes conn…