Lines Matching +full:burst +full:- +full:clock +full:- +full:frequency
1 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
4 <meta http-equiv="content-type" content="text/html;charset=iso-8859-1">
14 <!-- #BeginDate format:En2m -->31-Jan-2014 06:54<!-- #EndDate -->
28 <li class="inline"><a href="#burst">Burst Options</a></li>
34 …tomatic Server Discovery Schemes</a> page. In addition, the <a href="#burst">burst options</a> and…
37 … configuration in the Internet today. It operates in the classic remote-procedure-call (RPC) parad…
38 …to several seconds. The <tt>burst</tt> option described later on this page can be useful to reduce…
39 …e range. Unless noted otherwise, these options should not be used with reference clock drivers.</p>
42 of low-stratum peers operate as mutual backups for each other. Each peer operates
43 with one or more primary reference sources, such as a reference clock, or a set
48 this would be described as a "push-pull" operation, in that the
52 …d and specifying the other peer DNS name or IPv4 or IPv6 address. The <tt>burst</tt> and <tt>iburs…
55 …ly, broadcast packets do not extend beyond a level-3 router. Where service is intended beyond a le…
60 …he interval is the default minimum 64 s. Under normal conditions when the clock discipline has sta…
61 …clock frequency error must be small enough for the discipline loop to capture and correct. The cap…
66 …urther reduced using a poll exponent of 4 (16 s). In the case of the pulse-per-second (PPS) driver…
70 <h4 id="burst">Burst Options</h4>
71 …burst</tt> and <tt>iburst</tt> options of the <a href="confopt.html"><tt>server</tt></a> command, …
72 …burst options where a single poll event triggers a burst. They should be used only with the <tt>se…
73 …clock must be set quickly or when the network attachment requires an initial calling or training s…
74 <p>The <tt>burst</tt> option is useful in cases of severe network
76 …nt is larger than 10 (1024 s). A burst is sent only when the server is reachable. The number of …