Lines Matching +full:9 +full:- +full:inch
2 # Copyright 2019-2023,2024 Thomas E. Dickey #
3 # Copyright 2002-2015,2016 Free Software Foundation, Inc. #
43 # This file has three major sections; a standard-capabilities table, two
44 # extension-capability tables, and a section of aliases declarations.
53 # Column 5: KEY_xxx name, if any, `-' otherwise
54 # Column 6: value for KEY_xxx name, if any, `-' otherwise
56 # translations, `-' otherwise
59 # The codes following [Y-] in column 7 describe the versions of termcap which
63 # lot of old termcap-using programs). The codes read as follows:
95 # as an already-supported one. The compiler will handle aliasing, emitting
99 # to do this -- the capabilities in that one, and their order, have been
100 # carefully chosen to be SVr4-binary-compatible when they're written out
115 # to terminfo with tic -I. Some very old obsolete BSD caps like :kn: are
127 # Machines with IBM PC-like keyboards want to be able to define the following
128 # keys: key_npage, key_ppage, key_home, key_ll (which is used for in termcap-
129 # only environments for End or Home-Down), key_dc, and key_ic. This is also
152 # Emacs only, we'll probably elide out some BSD-only capabilities in order
153 # to buy space for non-essentials Emacs is still using. Capabilities high
171 # Reducing the inter-column gaps to 2 ens gives them enough room. --GBR
182 #%.IR \%term\%info -using
196 #%these codes are the same as or similar to those of the ANSI X3.64-1979
198 #%(now superseded by ECMA-48,
253 auto_left_margin bw bool bw - - YB-G- cub1 wraps from column 0 to last column
254 auto_right_margin am bool am - - YBCGE terminal has automatic margins
255 no_esc_ctlc xsb bool xb - - YBCG- beehive (f1=escape, f2=ctrl C)
256 ceol_standout_glitch xhp bool xs - - YBCGE standout not erased by overwriting (hp)
257 eat_newline_glitch xenl bool xn - - YBCGE newline ignored after 80 cols (concept)
258 erase_overstrike eo bool eo - - YBCG- can erase overstrikes with a blank
259 generic_type gn bool gn - - YB-G- generic line type
260 hard_copy hc bool hc - - YBCG- hardcopy terminal
261 has_meta_key km bool km - - YB-GE Has a meta key (i.e., sets 8th-bit)
262 has_status_line hs bool hs - - YB-G- has extra status line
263 insert_null_glitch in bool in - - YBCGE insert mode distinguishes nulls
264 memory_above da bool da - - YBCG- display may be retained above the screen
265 memory_below db bool db - - YB-GE display may be retained below the screen
266 move_insert_mode mir bool mi - - YBCGE safe to move while in insert mode
267 move_standout_mode msgr bool ms - - YBCGE safe to move while in standout mode
268 over_strike os bool os - - YBCG- terminal can overstrike
269 status_line_esc_ok eslok bool es - - YB-G- escape can be used on the status line
270 dest_tabs_magic_smso xt bool xt - - YBCGE tabs destructive, magic so char (t1061)
271 tilde_glitch hz bool hz - - YB-GE cannot print ~'s (Hazeltine)
272 transparent_underline ul bool ul - - YBCGE underline character overstrikes
273 xon_xoff xon bool xo - - YB--- terminal uses xon/xoff handshaking
274 # end Booleans for HPUX 9, 10 (non-color curses)
275 needs_xon_xoff nxon bool nx - - ----- padding will not work, xon/xoff required
276 prtr_silent mc5i bool 5i - - ----- printer will not echo on screen
277 hard_cursor chts bool HC - - ----- cursor is hard to see
278 non_rev_rmcup nrrmc bool NR - - ----- smcup does not reverse rmcup
279 no_pad_char npc bool NP - - ----- pad character does not exist
280 non_dest_scroll_region ndscr bool ND - - ----- scrolling region is non-destructive
281 can_change ccc bool cc - - ----- terminal can re-define existing colors
282 back_color_erase bce bool ut - - ----- screen erased with background color
283 hue_lightness_saturation hls bool hl - - ----- terminal uses only HLS color notation (Tektronix)
284 col_addr_glitch xhpa bool YA - - ----- only positive motion for hpa/mhpa caps
285 cr_cancels_micro_mode crxm bool YB - - ----- using cr turns off micro mode
286 has_print_wheel daisy bool YC - - ----- printer needs operator to change character set
287 row_addr_glitch xvpa bool YD - - ----- only positive motion for vpa/mvpa caps
288 semi_auto_right_margin sam bool YE - - ----- printing in last column causes cr
289 cpi_changes_res cpix bool YF - - ----- changing character pitch changes resolution
290 lpi_changes_res lpix bool YG - - ----- changing line pitch changes resolution
302 columns cols num co - - YBCGE number of columns in a line
303 init_tabs it num it - - YB-G- tabs initially every # spaces
304 lines lines num li - - YBCGE number of lines on screen or page
305 lines_of_memory lm num lm - - YB-G- lines of memory if > line. 0 means varies
306 magic_cookie_glitch xmc num sg - - YBCGE number of blank characters left by smso or rmso
307 padding_baud_rate pb num pb - - YB-GE lowest baud rate where padding needed
308 virtual_terminal vt num vt - - YB--- virtual terminal number (CB/unix)
309 width_status_line wsl num ws - - YB-G- number of columns in status line
310 # end numbers for HPUX 9, 10 (non-color curses)
311 num_labels nlab num Nl - - ----- number of labels on screen
312 label_height lh num lh - - ----- rows in each label
313 label_width lw num lw - - ----- columns in each label
314 max_attributes ma num ma - - YBC-- maximum combined attributes terminal can handle
315 maximum_windows wnum num MW - - ----- maximum number of definable windows
317 max_colors colors num Co - - ----- maximum number of colors on screen
318 max_pairs pairs num pa - - ----- maximum number of color-pairs on the screen
319 no_color_video ncv num NC - - ----- video attributes that cannot be used with colors
336 buffer_capacity bufsz num Ya - - ----- numbers of bytes buffered before printing
337 dot_vert_spacing spinv num Yb - - ----- spacing of pins vertically in pins per inch
338 dot_horz_spacing spinh num Yc - - ----- spacing of dots horizontally in dots per inch
339 max_micro_address maddr num Yd - - ----- maximum value in micro_..._address
340 max_micro_jump mjump num Ye - - ----- maximum value in parm_..._micro
341 micro_char_size mcs num Yf - - ----- character step size when in micro mode
342 micro_line_size mls num Yg - - ----- line step size when in micro mode
343 number_of_pins npins num Yh - - ----- numbers of pins in print-head
344 output_res_char orc num Yi - - ----- horizontal resolution in units per line
345 output_res_line orl num Yj - - ----- vertical resolution in units per line
346 output_res_horz_inch orhi num Yk - - ----- horizontal resolution in units per inch
347 output_res_vert_inch orvi num Yl - - ----- vertical resolution in units per inch
348 print_rate cps num Ym - - ----- print rate in characters per second
349 wide_char_size widcs num Yn - - ----- character step size when in double wide mode
350 buttons btns num BT - - ----- number of buttons on mouse
351 bit_image_entwining bitwin num Yo - - ----- number of passes for each bit-image row
352 bit_image_type bitype num Yp - - ----- type of bit-image device
364 back_tab cbt str bt - - YBCGE back tab (P)
365 bell bel str bl - - YB-GE audible signal (bell) (P)
366 carriage_return cr str cr - - YBCGE carriage return (P*) (P*)
367 change_scroll_region csr str cs - - YBCGE change region to line #1 to line #2 (P)
368 clear_all_tabs tbc str ct - - YB-G- clear all tab stops (P)
369 clear_screen clear str cl - - YBCGE clear screen and home cursor (P*)
370 clr_eol el str ce - - YBCGE clear to end of line (P)
371 clr_eos ed str cd - - YBCGE clear to end of screen (P*)
372 column_address hpa str ch - - -B-GE* horizontal position #1, absolute (P)
373 command_character cmdch str CC - - YB-G- terminal settable cmd character in prototype !?
374 cursor_address cup str cm - - YBCGE move to row #1 columns #2
375 cursor_down cud1 str do - - YBCGE down one line
376 cursor_home home str ho - - YBCGE home cursor (if no cup)
377 cursor_invisible civis str vi - - YB-G- make cursor invisible
378 cursor_left cub1 str le - - YBCGE move left one space
379 cursor_mem_address mrcup str CM - - YB-G- memory relative cursor addressing, move to row #1 colum…
380 cursor_normal cnorm str ve - - YBCGE make cursor appear normal (undo civis/cvvis)
381 cursor_right cuf1 str nd - - YBCGE non-destructive space (move right one space)
382 cursor_to_ll ll str ll - - YBCGE last line, first column (if no cup)
383 cursor_up cuu1 str up - - YBCGE up one line
384 cursor_visible cvvis str vs - - YBCGE make cursor very visible
385 delete_character dch1 str dc - - YBCGE delete character (P*)
386 delete_line dl1 str dl - - YBCGE delete line (P*)
387 dis_status_line dsl str ds - - YB-G- disable status line
388 down_half_line hd str hd - - YB-G- half a line down
389 enter_alt_charset_mode smacs str as - - YB-G- start alternate character set (P)
390 enter_blink_mode blink str mb - - YB-G- turn on blinking
391 enter_bold_mode bold str md - - YB-G- turn on bold (extra bright) mode
392 enter_ca_mode smcup str ti - - YBCGE string to start programs using cup
393 enter_delete_mode smdc str dm - - YBCGE enter delete mode
394 enter_dim_mode dim str mh - - YB-G- turn on half-bright mode
395 enter_insert_mode smir str im - - YBCGE enter insert mode
396 enter_secure_mode invis str mk - - -B-G-* turn on blank mode (characters invisible)
397 enter_protected_mode prot str mp - - -B-G-* turn on protected mode
398 enter_reverse_mode rev str mr - - YB-G- turn on reverse video mode
399 enter_standout_mode smso str so - - YBCGE begin standout mode
400 enter_underline_mode smul str us - - YBCGE begin underline mode
401 erase_chars ech str ec - - YB-G- erase #1 characters (P)
402 exit_alt_charset_mode rmacs str ae - - YB-G- end alternate character set (P)
403 exit_attribute_mode sgr0 str me - - YB-GE turn off all attributes
404 exit_ca_mode rmcup str te - - YBCGE strings to end programs using cup
405 exit_delete_mode rmdc str ed - - YBCGE end delete mode
406 exit_insert_mode rmir str ei - - YBCGE exit insert mode
407 exit_standout_mode rmso str se - - YBCGE exit standout mode
408 exit_underline_mode rmul str ue - - YBCGE exit underline mode
409 flash_screen flash str vb - - YBCGE visible bell (may not move cursor)
410 form_feed ff str ff - - YB-G- hardcopy terminal page eject (P*)
411 from_status_line fsl str fs - - YB-G- return from status line
412 init_1string is1 str i1 - - YB-G- initialization string
413 init_2string is2 str is - - YB-G- initialization string
414 init_3string is3 str i3 - - YB-G- initialization string
415 init_file if str if - - YB-G- name of initialization file
416 insert_character ich1 str ic - - YBCGE insert character (P)
417 insert_line il1 str al - - YBCGE insert line (P*)
418 insert_padding ip str ip - - YBCGE insert padding after inserted character
419 key_backspace kbs str kb KEY_BACKSPACE 0407 YB-G- backspace key
420 key_catab ktbc str ka KEY_CATAB 0526 -B-G-* clear-all-tabs key
421 key_clear kclr str kC KEY_CLEAR 0515 -B-G-* clear-screen or erase key
422 key_ctab kctab str kt KEY_CTAB 0525 -B-G-* clear-tab key
423 key_dc kdch1 str kD KEY_DC 0512 YB-G- delete-character key
424 key_dl kdl1 str kL KEY_DL 0510 -B-G-* delete-line key
425 key_down kcud1 str kd KEY_DOWN 0402 YBCGE down-arrow key
430 key_eic krmir str kM KEY_EIC 0514 -B-G-* sent by rmir or smir in insert mode
431 key_eol kel str kE KEY_EOL 0517 -B-G-* clear-to-end-of-line key
432 key_eos ked str kS KEY_EOS 0516 -B-G-* clear-to-end-of-screen key
434 key_f1 kf1 str k1 KEY_F(1) - YBCGE F1 function key
435 key_f10 kf10 str k; KEY_F(10) - ----E F10 function key
436 key_f2 kf2 str k2 KEY_F(2) - YBCGE F2 function key
437 key_f3 kf3 str k3 KEY_F(3) - YBCGE F3 function key
438 key_f4 kf4 str k4 KEY_F(4) - YBCGE F4 function key
439 key_f5 kf5 str k5 KEY_F(5) - YBCGE F5 function key
440 key_f6 kf6 str k6 KEY_F(6) - YBCGE F6 function key
441 key_f7 kf7 str k7 KEY_F(7) - YBCGE F7 function key
442 key_f8 kf8 str k8 KEY_F(8) - YBCGE F8 function key
443 key_f9 kf9 str k9 KEY_F(9) - YBCGE F9 function key
445 key_ic kich1 str kI KEY_IC 0513 YB-GE insert-character key
446 key_il kil1 str kA KEY_IL 0511 -B-G-* insert-line key
447 key_left kcub1 str kl KEY_LEFT 0404 YBCGE left-arrow key
448 key_ll kll str kH KEY_LL 0533 YB-G- lower-left key (home down)
449 key_npage knp str kN KEY_NPAGE 0522 YB-GE next-page key
450 key_ppage kpp str kP KEY_PPAGE 0523 YB-GE previous-page key
451 key_right kcuf1 str kr KEY_RIGHT 0405 YBCGE right-arrow key
452 key_sf kind str kF KEY_SF 0520 -B-G-* scroll-forward key
453 key_sr kri str kR KEY_SR 0521 -B-G-* scroll-backward key
454 key_stab khts str kT KEY_STAB 0524 -B-G-* set-tab key
455 key_up kcuu1 str ku KEY_UP 0403 YBCGE up-arrow key
456 keypad_local rmkx str ke - - YBCGE leave 'keyboard_transmit' mode
457 keypad_xmit smkx str ks - - YBCGE enter 'keyboard_transmit' mode
458 lab_f0 lf0 str l0 - - -B-G-* label on function key f0 if not f0
459 lab_f1 lf1 str l1 - - -B-G-* label on function key f1 if not f1
460 lab_f10 lf10 str la - - ----- label on function key f10 if not f10
461 lab_f2 lf2 str l2 - - -B-G-* label on function key f2 if not f2
462 lab_f3 lf3 str l3 - - -B-G-* label on function key f3 if not f3
463 lab_f4 lf4 str l4 - - -B-G-* label on function key f4 if not f4
464 lab_f5 lf5 str l5 - - -B-G-* label on function key f5 if not f5
465 lab_f6 lf6 str l6 - - -B-G-* label on function key f6 if not f6
466 lab_f7 lf7 str l7 - - -B-G-* label on function key f7 if not f7
467 lab_f8 lf8 str l8 - - -B-G-* label on function key f8 if not f8
468 lab_f9 lf9 str l9 - - -B-G-* label on function key f9 if not f9
469 meta_off rmm str mo - - YB-G-* turn off meta mode
470 meta_on smm str mm - - YB-G-* turn on meta mode (8th-bit on)
471 newline nel str nw - - YB-G-* newline (behave like cr followed by lf)
472 pad_char pad str pc - - YBCGE padding char (instead of null)
473 parm_dch dch str DC - - YB-GE delete #1 characters (P*)
474 parm_delete_line dl str DL - - YBCGE delete #1 lines (P*)
475 parm_down_cursor cud str DO - - YBCGE down #1 lines (P*)
476 parm_ich ich str IC - - YB-GE insert #1 characters (P*)
477 parm_index indn str SF - - YBCG- scroll forward #1 lines (P)
478 parm_insert_line il str AL - - YBCGE insert #1 lines (P*)
479 parm_left_cursor cub str LE - - YBCGE move #1 characters to the left (P)
480 parm_right_cursor cuf str RI - - YBCGE move #1 characters to the right (P*)
481 parm_rindex rin str SR - - YBCG- scroll back #1 lines (P)
482 parm_up_cursor cuu str UP - - YBCGE up #1 lines (P*)
483 pkey_key pfkey str pk - - -B--- program function key #1 to type string #2
484 pkey_local pfloc str pl - - -B--- program function key #1 to execute string #2
485 pkey_xmit pfx str px - - -B--- program function key #1 to transmit string #2
486 print_screen mc0 str ps - - -B-G-* print contents of screen
487 prtr_off mc4 str pf - - -B-G-* turn off printer
488 prtr_on mc5 str po - - -B-G-* turn on printer
489 repeat_char rep str rp - - YB-GE repeat char #1 #2 times (P*)
490 reset_1string rs1 str r1 - - -B--- reset string
491 reset_2string rs2 str r2 - - -B--- reset string
496 reset_3string rs3 str r3 - - -B--- reset string
497 reset_file rf str rf - - -B--- name of reset file
498 restore_cursor rc str rc - - YBCG- restore cursor to position of last save_cursor
499 row_address vpa str cv - - -B-GE* vertical position #1 absolute (P)
500 save_cursor sc str sc - - YBCG- save current cursor position (P)
501 scroll_forward ind str sf - - YBCGE scroll text up (P)
502 scroll_reverse ri str sr - - YBCGE scroll text down (P)
503 set_attributes sgr str sa - - YB-G- define video attributes #1-#9 (PG9)
504 set_tab hts str st - - YB-G- set a tab in every row, current columns
505 set_window wind str wi - - -B-GE current window is lines #1-#2 cols #3-#4
506 tab ht str ta - - YBCGE tab to next 8-space hardware tab stop
507 to_status_line tsl str ts - - YB-G- move to status line, column #1
508 underline_char uc str uc - - YBCG- underline char and move past it
509 up_half_line hu str hu - - YB-G- half a line up
510 init_prog iprog str iP - - -B--- path name of program for initialization
511 key_a1 ka1 str K1 KEY_A1 0534 YB-GE upper left of keypad
512 key_a3 ka3 str K3 KEY_A3 0535 YB-GE upper right of keypad
513 key_b2 kb2 str K2 KEY_B2 0536 YB-GE center of keypad
514 key_c1 kc1 str K4 KEY_C1 0537 YB-GE lower left of keypad
515 key_c3 kc3 str K5 KEY_C3 0540 YB-GE lower right of keypad
516 prtr_non mc5p str pO - - -B-G-* turn on printer for #1 bytes
522 memory_lock meml str ml - - ----K lock memory above cursor
523 memory_unlock memu str mu - - ----K unlock memory
526 plab_norm pln str pn - - ----- program label #1 to show string #2
527 label_on smln str LO - - ----- turn on soft labels
528 label_off rmln str LF - - ----- turn off soft labels
529 key_f11 kf11 str F1 KEY_F(11) - ----E F11 function key
530 key_f12 kf12 str F2 KEY_F(12) - ----E F12 function key
531 key_f13 kf13 str F3 KEY_F(13) - ----E F13 function key
532 key_f14 kf14 str F4 KEY_F(14) - ----E F14 function key
533 key_f15 kf15 str F5 KEY_F(15) - ----E F15 function key
534 key_f16 kf16 str F6 KEY_F(16) - ----E F16 function key
535 key_f17 kf17 str F7 KEY_F(17) - ----E F17 function key
536 key_f18 kf18 str F8 KEY_F(18) - ----E F18 function key
537 key_f19 kf19 str F9 KEY_F(19) - ----E F19 function key
538 key_f20 kf20 str FA KEY_F(20) - ----E F20 function key
539 key_f21 kf21 str FB KEY_F(21) - ----E F21 function key
540 key_f22 kf22 str FC KEY_F(22) - ----E F22 function key
541 key_f23 kf23 str FD KEY_F(23) - ----E F23 function key
542 key_f24 kf24 str FE KEY_F(24) - ----E F24 function key
543 key_f25 kf25 str FF KEY_F(25) - ----E F25 function key
544 key_f26 kf26 str FG KEY_F(26) - ----E F26 function key
545 key_f27 kf27 str FH KEY_F(27) - ----E F27 function key
546 key_f28 kf28 str FI KEY_F(28) - ----E F28 function key
547 key_f29 kf29 str FJ KEY_F(29) - ----E F29 function key
548 key_f30 kf30 str FK KEY_F(30) - ----E F30 function key
549 key_f31 kf31 str FL KEY_F(31) - ----E F31 function key
550 key_f32 kf32 str FM KEY_F(32) - ----E F32 function key
551 key_f33 kf33 str FN KEY_F(33) - ----E F33 function key
552 key_f34 kf34 str FO KEY_F(34) - ----E F34 function key
553 key_f35 kf35 str FP KEY_F(35) - ----E F35 function key
554 key_f36 kf36 str FQ KEY_F(36) - ----E F36 function key
555 key_f37 kf37 str FR KEY_F(37) - ----E F37 function key
556 key_f38 kf38 str FS KEY_F(38) - ----E F38 function key
557 key_f39 kf39 str FT KEY_F(39) - ----E F39 function key
558 key_f40 kf40 str FU KEY_F(40) - ----E F40 function key
559 key_f41 kf41 str FV KEY_F(41) - ----E F41 function key
560 key_f42 kf42 str FW KEY_F(42) - ----E F42 function key
565 key_f43 kf43 str FX KEY_F(43) - ----E F43 function key
566 key_f44 kf44 str FY KEY_F(44) - ----E F44 function key
567 key_f45 kf45 str FZ KEY_F(45) - ----E F45 function key
568 key_f46 kf46 str Fa KEY_F(46) - ----E F46 function key
569 key_f47 kf47 str Fb KEY_F(47) - ----E F47 function key
570 key_f48 kf48 str Fc KEY_F(48) - ----E F48 function key
571 key_f49 kf49 str Fd KEY_F(49) - ----E F49 function key
572 key_f50 kf50 str Fe KEY_F(50) - ----E F50 function key
573 key_f51 kf51 str Ff KEY_F(51) - ----E F51 function key
574 key_f52 kf52 str Fg KEY_F(52) - ----E F52 function key
575 key_f53 kf53 str Fh KEY_F(53) - ----E F53 function key
576 key_f54 kf54 str Fi KEY_F(54) - ----E F54 function key
577 key_f55 kf55 str Fj KEY_F(55) - ----E F55 function key
578 key_f56 kf56 str Fk KEY_F(56) - ----E F56 function key
579 key_f57 kf57 str Fl KEY_F(57) - ----E F57 function key
580 key_f58 kf58 str Fm KEY_F(58) - ----E F58 function key
581 key_f59 kf59 str Fn KEY_F(59) - ----E F59 function key
582 key_f60 kf60 str Fo KEY_F(60) - ----E F60 function key
583 key_f61 kf61 str Fp KEY_F(61) - ----E F61 function key
584 key_f62 kf62 str Fq KEY_F(62) - ----E F62 function key
585 key_f63 kf63 str Fr KEY_F(63) - ----E F63 function key
586 # end of strings in HPUX 9
587 char_padding rmp str rP - - ----- like ip but when in insert mode
588 acs_chars acsc str ac - - ----- graphics charset pairs, based on vt100
589 key_btab kcbt str kB KEY_BTAB 0541 ----- back-tab key
590 enter_xon_mode smxon str SX - - ----- turn on xon/xoff handshaking
591 exit_xon_mode rmxon str RX - - ----- turn off xon/xoff handshaking
592 enter_am_mode smam str SA - - ----- turn on automatic margins
593 exit_am_mode rmam str RA - - ----- turn off automatic margins
594 xon_character xonc str XN - - ----- XON character
595 xoff_character xoffc str XF - - ----- XOFF character
596 ena_acs enacs str eA - - ----- enable alternate char set
597 key_beg kbeg str @1 KEY_BEG 0542 ----- begin key
598 key_cancel kcan str @2 KEY_CANCEL 0543 ----- cancel key
599 key_close kclo str @3 KEY_CLOSE 0544 ----- close key
600 key_command kcmd str @4 KEY_COMMAND 0545 ----- command key
601 key_copy kcpy str @5 KEY_COPY 0546 ----- copy key
602 key_create kcrt str @6 KEY_CREATE 0547 ----- create key
603 key_end kend str @7 KEY_END 0550 ----- end key
604 key_enter kent str @8 KEY_ENTER 0527 ----- enter/send key
605 key_exit kext str @9 KEY_EXIT 0551 ----- exit key
606 key_find kfnd str @0 KEY_FIND 0552 ----- find key
607 key_help khlp str %1 KEY_HELP 0553 ----- help key
608 key_mark kmrk str %2 KEY_MARK 0554 ----- mark key
609 key_message kmsg str %3 KEY_MESSAGE 0555 ----- message key
610 key_move kmov str %4 KEY_MOVE 0556 ----- move key
611 key_next knxt str %5 KEY_NEXT 0557 ----- next key
612 key_open kopn str %6 KEY_OPEN 0560 ----- open key
613 key_options kopt str %7 KEY_OPTIONS 0561 ----- options key
614 key_previous kprv str %8 KEY_PREVIOUS 0562 ----- previous key
615 key_print kprt str %9 KEY_PRINT 0532 ----- print key
616 key_redo krdo str %0 KEY_REDO 0563 ----- redo key
617 key_reference kref str &1 KEY_REFERENCE 0564 ----- reference key
618 key_refresh krfr str &2 KEY_REFRESH 0565 ----- refresh key
619 key_replace krpl str &3 KEY_REPLACE 0566 ----- replace key
620 key_restart krst str &4 KEY_RESTART 0567 ----- restart key
621 key_resume kres str &5 KEY_RESUME 0570 ----- resume key
622 key_save ksav str &6 KEY_SAVE 0571 ----- save key
623 key_suspend kspd str &7 KEY_SUSPEND 0627 ----- suspend key
624 key_undo kund str &8 KEY_UNDO 0630 ----- undo key
629 key_sbeg kBEG str &9 KEY_SBEG 0572 ----- shifted begin key
630 key_scancel kCAN str &0 KEY_SCANCEL 0573 ----- shifted cancel key
631 key_scommand kCMD str *1 KEY_SCOMMAND 0574 ----- shifted command key
632 key_scopy kCPY str *2 KEY_SCOPY 0575 ----- shifted copy key
633 key_screate kCRT str *3 KEY_SCREATE 0576 ----- shifted create key
634 key_sdc kDC str *4 KEY_SDC 0577 ----- shifted delete-character key
635 key_sdl kDL str *5 KEY_SDL 0600 ----- shifted delete-line key
636 key_select kslt str *6 KEY_SELECT 0601 ----- select key
637 key_send kEND str *7 KEY_SEND 0602 ----- shifted end key
638 key_seol kEOL str *8 KEY_SEOL 0603 ----- shifted clear-to-end-of-line key
639 key_sexit kEXT str *9 KEY_SEXIT 0604 ----- shifted exit key
640 key_sfind kFND str *0 KEY_SFIND 0605 ----- shifted find key
641 key_shelp kHLP str #1 KEY_SHELP 0606 ----- shifted help key
642 key_shome kHOM str #2 KEY_SHOME 0607 ----- shifted home key
643 key_sic kIC str #3 KEY_SIC 0610 ----- shifted insert-character key
644 key_sleft kLFT str #4 KEY_SLEFT 0611 ----- shifted left-arrow key
645 key_smessage kMSG str %a KEY_SMESSAGE 0612 ----- shifted message key
646 key_smove kMOV str %b KEY_SMOVE 0613 ----- shifted move key
647 key_snext kNXT str %c KEY_SNEXT 0614 ----- shifted next key
648 key_soptions kOPT str %d KEY_SOPTIONS 0615 ----- shifted options key
649 key_sprevious kPRV str %e KEY_SPREVIOUS 0616 ----- shifted previous key
650 key_sprint kPRT str %f KEY_SPRINT 0617 ----- shifted print key
651 key_sredo kRDO str %g KEY_SREDO 0620 ----- shifted redo key
652 key_sreplace kRPL str %h KEY_SREPLACE 0621 ----- shifted replace key
653 key_sright kRIT str %i KEY_SRIGHT 0622 ----- shifted right-arrow key
654 key_srsume kRES str %j KEY_SRSUME 0623 ----- shifted resume key
655 key_ssave kSAV str !1 KEY_SSAVE 0624 ----- shifted save key
656 key_ssuspend kSPD str !2 KEY_SSUSPEND 0625 ----- shifted suspend key
657 key_sundo kUND str !3 KEY_SUNDO 0626 ----- shifted undo key
658 req_for_input rfi str RF - - ----- send next input char (for ptys)
659 clr_bol el1 str cb - - ----- Clear to beginning of line
660 clear_margins mgc str MC - - ----- clear right and left soft margins
661 set_left_margin smgl str ML - - ----- set left soft margin at current column (not in BSD \fIterm…
662 set_right_margin smgr str MR - - ----- set right soft margin at current column
663 label_format fln str Lf - - ----- label format
664 set_clock sclk str SC - - ----- set clock, #1 hrs #2 mins #3 secs
665 display_clock dclk str DK - - ----- display clock
666 remove_clock rmclk str RC - - ----- remove clock
667 create_window cwin str CW - - ----- define a window #1 from #2,#3 to #4,#5
668 goto_window wingo str WG - - ----- go to window #1
669 hangup hup str HU - - ----- hang-up phone
670 dial_phone dial str DI - - ----- dial number #1
671 quick_dial qdial str QD - - ----- dial number #1 without checking
672 tone tone str TO - - ----- select touch tone dialing
673 pulse pulse str PU - - ----- select pulse dialing
674 flash_hook hook str fh - - ----- flash switch hook
675 fixed_pause pause str PA - - ----- pause for 2-3 seconds
676 wait_tone wait str WA - - ----- wait for dial-tone
677 user0 u0 str u0 - - ----- User string #0
678 user1 u1 str u1 - - ----- User string #1
679 user2 u2 str u2 - - ----- User string #2
680 user3 u3 str u3 - - ----- User string #3
681 user4 u4 str u4 - - ----- User string #4
682 user5 u5 str u5 - - ----- User string #5
683 user6 u6 str u6 - - ----- User string #6
684 user7 u7 str u7 - - ----- User string #7
685 user8 u8 str u8 - - ----- User string #8
686 user9 u9 str u9 - - ----- User string #9
690 orig_pair op str op - - ----- Set default pair to its original value
691 orig_colors oc str oc - - ----- Set all color pairs to the original ones
692 initialize_color initc str Ic - - ----- initialize color #1 to (#2,#3,#4)
693 initialize_pair initp str Ip - - ----- Initialize color pair #1 to fg=(#2,#3,#4), bg=(#5,#6,#7)
694 set_color_pair scp str sp - - ----- Set current color pair to #1
695 set_foreground setf str Sf - - ----- Set foreground color #1
696 set_background setb str Sb - - ----- Set background color #1
700 change_char_pitch cpi str ZA - - ----- Change number of characters per inch to #1
701 change_line_pitch lpi str ZB - - ----- Change number of lines per inch to #1
702 change_res_horz chr str ZC - - ----- Change horizontal resolution to #1
703 change_res_vert cvr str ZD - - ----- Change vertical resolution to #1
704 define_char defc str ZE - - ----- Define a character #1, #2 dots wide, descender #3
705 enter_doublewide_mode swidm str ZF - - ----- Enter double-wide mode
710 enter_draft_quality sdrfq str ZG - - ----- Enter draft-quality mode
711 enter_italics_mode sitm str ZH - - ----- Enter italic mode
712 enter_leftward_mode slm str ZI - - ----- Start leftward carriage motion
713 enter_micro_mode smicm str ZJ - - ----- Start micro-motion mode
714 enter_near_letter_quality snlq str ZK - - ----- Enter NLQ mode
715 enter_normal_quality snrmq str ZL - - ----- Enter normal-quality mode
716 enter_shadow_mode sshm str ZM - - ----- Enter shadow-print mode
717 enter_subscript_mode ssubm str ZN - - ----- Enter subscript mode
718 enter_superscript_mode ssupm str ZO - - ----- Enter superscript mode
719 enter_upward_mode sum str ZP - - ----- Start upward carriage motion
720 exit_doublewide_mode rwidm str ZQ - - ----- End double-wide mode
721 exit_italics_mode ritm str ZR - - ----- End italic mode
722 exit_leftward_mode rlm str ZS - - ----- End left-motion mode
723 exit_micro_mode rmicm str ZT - - ----- End micro-motion mode
724 exit_shadow_mode rshm str ZU - - ----- End shadow-print mode
725 exit_subscript_mode rsubm str ZV - - ----- End subscript mode
726 exit_superscript_mode rsupm str ZW - - ----- End superscript mode
727 exit_upward_mode rum str ZX - - ----- End reverse character motion
728 micro_column_address mhpa str ZY - - ----- Like column_address in micro mode
729 micro_down mcud1 str ZZ - - ----- Like cursor_down in micro mode
730 micro_left mcub1 str Za - - ----- Like cursor_left in micro mode
731 micro_right mcuf1 str Zb - - ----- Like cursor_right in micro mode
732 micro_row_address mvpa str Zc - - ----- Like row_address #1 in micro mode
733 micro_up mcuu1 str Zd - - ----- Like cursor_up in micro mode
734 order_of_pins porder str Ze - - ----- Match software bits to print-head pins
735 parm_down_micro mcud str Zf - - ----- Like parm_down_cursor in micro mode
736 parm_left_micro mcub str Zg - - ----- Like parm_left_cursor in micro mode
737 parm_right_micro mcuf str Zh - - ----- Like parm_right_cursor in micro mode
738 parm_up_micro mcuu str Zi - - ----- Like parm_up_cursor in micro mode
739 select_char_set scs str Zj - - ----- Select character set, #1
740 set_bottom_margin smgb str Zk - - ----- Set bottom margin at current line
741 set_bottom_margin_parm smgbp str Zl - - ----- Set bottom margin at line #1 or (if smgtp is not gi…
742 set_left_margin_parm smglp str Zm - - ----- Set left (right) margin at column #1
743 set_right_margin_parm smgrp str Zn - - ----- Set right margin at column #1
744 set_top_margin smgt str Zo - - ----- Set top margin at current line
745 set_top_margin_parm smgtp str Zp - - ----- Set top (bottom) margin at row #1
746 start_bit_image sbim str Zq - - ----- Start printing bit image graphics
747 start_char_set_def scsd str Zr - - ----- Start character set definition #1, with #2 characters in…
748 stop_bit_image rbim str Zs - - ----- Stop printing bit image graphics
749 stop_char_set_def rcsd str Zt - - ----- End definition of character set #1
750 subscript_characters subcs str Zu - - ----- List of subscriptable characters
751 superscript_characters supcs str Zv - - ----- List of superscriptable characters
752 these_cause_cr docr str Zw - - ----- Printing any of these characters causes CR
753 zero_motion zerom str Zx - - ----- No motion for subsequent character
769 char_set_names csnm str Zy - - ----- Produce #1'th item from list of character set names
770 key_mouse kmous str Km KEY_MOUSE 0631 ----- Mouse event has occurred
771 mouse_info minfo str Mi - - ----- Mouse status information
772 req_mouse_pos reqmp str RQ - - ----- Request mouse position
773 get_mouse getm str Gm - - ----- Curses should get button events, parameter #1 not documented.
774 set_a_foreground setaf str AF - - ----- Set foreground color to #1, using ANSI escape
775 set_a_background setab str AB - - ----- Set background color to #1, using ANSI escape
776 pkey_plab pfxl str xl - - ----- Program function key #1 to type string #2 and show string #3
777 device_type devt str dv - - ----- Indicate language/codeset support
778 code_set_init csin str ci - - ----- Init sequence for multiple codesets
779 set0_des_seq s0ds str s0 - - ----- Shift to codeset 0 (EUC set 0, ASCII)
780 set1_des_seq s1ds str s1 - - ----- Shift to codeset 1
781 set2_des_seq s2ds str s2 - - ----- Shift to codeset 2
782 set3_des_seq s3ds str s3 - - ----- Shift to codeset 3
783 set_lr_margin smglr str ML - - ----- Set both left and right margins to #1, #2. (ML is not in B…
784 set_tb_margin smgtb str MT - - ----- Sets both top and bottom margins to #1, #2
785 bit_image_repeat birep str Xy - - ----- Repeat bit image cell #1 #2 times
786 bit_image_newline binel str Zz - - ----- Move to next row of the bit image
787 bit_image_carriage_return bicr str Yv - - ----- Move to beginning of same row
788 color_names colornm str Yw - - ----- Give name for color #1
789 define_bit_image_region defbi str Yx - - ----- Define rectangular bit image region
790 end_bit_image_region endbi str Yy - - ----- End a bit-image region
791 set_color_band setcolor str Yz - - ----- Change to ribbon color #1
792 set_page_length slines str YZ - - ----- Set page length to #1 lines
794 # SVr4 added these capabilities for direct PC-clone support
796 display_pc_char dispc str S1 - - ----- Display PC character #1
797 enter_pc_charset_mode smpch str S2 - - ----- Enter PC character display mode
798 exit_pc_charset_mode rmpch str S3 - - ----- Exit PC character display mode
799 enter_scancode_mode smsc str S4 - - ----- Enter PC scancode mode
800 exit_scancode_mode rmsc str S5 - - ----- Exit PC scancode mode
801 pc_term_options pctrm str S6 - - ----- PC terminal options
802 scancode_escape scesc str S7 - - ----- Escape for scancode emulation
803 alt_scancode_esc scesa str S8 - - ----- Alternate escape for scancode emulation
808 #%They were used in some post-4.1 versions of System V curses,
813 #%they may not be binary-compatible with System V terminfo
827 set_pglen_inch slength str YI - - ----- Set page length to #1 hundredth of an inch (some impleme…
828 enter_horizontal_hl_mode ehhlm str Q1 - - ----- Enter horizontal highlight mode
829 enter_left_hl_mode elhlm str Q2 - - ----- Enter left highlight mode
830 enter_low_hl_mode elohlm str Q3 - - ----- Enter low highlight mode
831 enter_right_hl_mode erhlm str Q4 - - ----- Enter right highlight mode
832 enter_top_hl_mode ethlm str Q5 - - ----- Enter top highlight mode
833 enter_vertical_hl_mode evhlm str Q6 - - ----- Enter vertical highlight mode
834 set_a_attributes sgr1 str Q7 - - ----- Define second set of video attributes #1-#6
835 exit_horizontal_hl_mode rmhhlm str Q8 - - ----K Exit horizontal highlight mode
836 exit_left_hl_mode rmlhlm str Q9 - - ----K Exit left highlight mode
837 exit_low_hl_mode rmlohlm str Qa - - ----K Exit low highlight mode
838 exit_right_hl_mode rmrhlm str Qb - - ----K Exit right highlight mode
839 exit_top_hl_mode rmthlm str Qc - - ----K Exit top highlight mode
840 exit_vertical_hl_mode rmvhlm str Qd - - ----K Exit vertical highlight mode
843 # The magic token below tells the tic compiler-generator code that all the caps
846 # This means we can have obsolete capabilities and pseudo-capabilities that are
849 # %%-STOP-HERE-%%
876 termcap_init2 OTi2 str i2 - - YB--- secondary initialization string
877 termcap_reset OTrs str rs - - YB-G- terminal reset string
878 magic_cookie_glitch_ul OTug num ug - - YBCGE number of blanks left by ul
884 backspaces_with_bs OTbs bool bs - - YBCGE uses ^H to move left
885 crt_no_scrolling OTns bool ns - - YBCG- crt cannot scroll
886 no_correctly_working_cr OTnc bool nc - - YBCG- no way to go to start of line
887 carriage_return_delay OTdC num dC - - YB-G- pad needed for CR
888 new_line_delay OTdN num dN - - YB-G- pad needed for LF
889 linefeed_if_not_lf OTnl str nl - - YBCGE use to move down
890 backspace_if_not_bs OTbc str bc - - YBCGE move left, if not ^H
893 # Emacs no longer uses these, but MT showed up in pre-9.0 versions of the
897 gnu_has_meta_key OTMT bool MT - - ----E has meta key
898 # gnu_tab_width OTtw num tw - - ----E tab width in spaces
901 # now-obsolete Ann Arbor terminals used it.
903 # gnu_change_scroll_region OTcS str cS - - ---GE alternate set scrolling region
917 # comma-separated list of capabilities for which there are corresponding keys.
936 linefeed_is_newline OTNL bool NL - - YB--- move down with \n
937 # even_parity OTEP bool EP - - -B--- terminal requires even parity
938 # odd_parity OTOP bool OP - - -B--- terminal requires odd parity
939 # half_duplex OTHD bool HD - - -B--- terminal is half-duplex
940 # lower_case_only OTLC bool LC - - -B--- terminal has only lower case
941 # upper_case_only OTUC bool UC - - -B--- terminal has only upper case
942 backspace_delay OTdB num dB - - YB-G- padding required for ^H
943 # form_feed_delay OTdF num dF - - -B-G- padding required for ^L
944 horizontal_tab_delay OTdT num dT - - YB-G- padding required for ^I
945 # vertical_tab_delay OTdV num dV - - -B--- padding required for ^V
946 number_of_function_keys OTkn num kn - - -B-G- count of function keys
947 other_non_function_keys OTko str ko - - -B-G- list of self-mapped keycaps
948 arrow_key_map OTma str ma - - YBC-- map motion-keys for vi version 2
949 # memory_lock_above OTml str ml - - -B--- lock visible screen memory above the current line
950 # memory_unlock OTmu str mu - - -B--- unlock visible screen memory above the current line
951 has_hardware_tabs OTpt bool pt - - YB--- has 8-char tabs invoked with ^I
952 return_does_clr_eol OTxr bool xr - - YB--- return clears the line
953 # tek_4025_insert_line OTxx bool xx - - -BC-- Tektronix 4025 insert-line glitch
959 # rind_only_at_top OTxq bool xq - - ----- reverse index only works from top line
966 # key_interrupt_char OTki str ki - - ----- string set by interrupt key (?)
967 # key_kill_char OTkk str kk - - ----- string set by kill key (?)
968 # key_suspend_char OTkz str kz - - ----- string set by suspend key (?)
969 # initialization_messy OTxc bool xc - - ----- initialization leaves garbage on the screen (?)
970 # ind_at_bottom_does_cr OTxl bool xl - - ----- index does a carriage return
976 # scroll_left OTsl1 str Sl - - ----- scroll screen leftward
977 # scroll_right OTsr1 str Sr - - ----- scroll screen rightward
978 # parm_scroll_left OTsl str SL - - ----- scroll screen leftward #1 characters
979 # parm_scroll_right OTsr str SR - - ----- scroll screen rightward #1 characters
985 # Xenix defined its own set of forms-drawing capabilities:
988 # --- ----------- -------------------- ------------- ------
989 # G1 191 \277 M-? single upper right ACS_URCORNER
990 # G2 218 \332 M-Z single upper left ACS_ULCORNER
991 # G3 192 \300 M-@ single lower left ACS_LLCORNER
992 # G4 217 \331 M-Y single lower right ACS_LRCORNER
993 # G5 187 \273 M-; double upper right
994 # G6 201 \311 M-I double upper left
995 # G7 200 \310 M-H double lower left
996 # G8 188 \274 M-< double lower right
997 # GC 197 \305 M-E single intersection ACS_PLUS _ _
998 # GD 194 \302 M-B single down-tick ACS_TTEE |
999 # GH 196 \304 M-D single horizontal line ACS_HLINE
1000 # GL 180 \264 M-4 single left tick ACS_RTEE -|
1001 # GR 195 \303 M-C single right tick ACS_LTEE |-
1002 # GU 193 \301 M-A single up tick ACS_BTEE _|_
1003 # GV 179 \263 M-3 single vertical line ACS_VLINE
1004 # Gc 206 \316 M-N double intersection
1005 # Gd 203 \313 M-K double down tick
1006 # Gh 205 \315 M-M double horizontal line
1007 # Gl 204 \204 M-L double left tick
1008 # Gr 185 \271 M-9 double right tick
1009 # Gu 202 \312 M-J double up tick
1010 # Gv 186 \272 M-: double vertical line
1012 # The compiler will translate the single-line caps and discard the others
1014 # translation on these, they're often single-character printable ASCII
1019 acs_ulcorner OTG2 str G2 - - ----- single upper left
1020 acs_llcorner OTG3 str G3 - - ----- single lower left
1021 acs_urcorner OTG1 str G1 - - ----- single upper right
1022 acs_lrcorner OTG4 str G4 - - ----- single lower right
1023 acs_ltee OTGR str GR - - ----- tee pointing right
1024 acs_rtee OTGL str GL - - ----- tee pointing left
1025 acs_btee OTGU str GU - - ----- tee pointing up
1026 acs_ttee OTGD str GD - - ----- tee pointing down
1027 acs_hline OTGH str GH - - ----- single horizontal line
1028 acs_vline OTGV str GV - - ----- single vertical line
1029 acs_plus OTGC str GC - - ----- single intersection
1035 # (see Caps-ncurses for the complete set of comments)
1037 box_chars_1 box1 str bx - - ----K box characters primary set