Implement an ``enable/disable echo'' option, defaults to off.
This allows LCP ECHOs to be enabled independently of LQR reports.

Note: This introduces a change in the default behaviour (search for lq

Implement an ``enable/disable echo'' option, defaults to off.
This allows LCP ECHOs to be enabled independently of LQR reports.

Note: This introduces a change in the default behaviour (search for lqr and
echo in the man page). I'll update UPDATING to reflect this.

PR: 74821

show more ...

Send NAS-IP-Address as well as NAS-Identifier
Add ``disable NAS-IP-Address'' and ``disable NAS-Identifier'' options to
support pre-rfc2865 RADIUS servers.
This pushes our enable/disable items over th

Send NAS-IP-Address as well as NAS-Identifier
Add ``disable NAS-IP-Address'' and ``disable NAS-Identifier'' options to
support pre-rfc2865 RADIUS servers.
This pushes our enable/disable items over the 32 bit limit, so reoganise
things to allow a bunch more options.
Go to version 3.4.1 so that any compatability problems can be identified.

show more ...

Add a bunch of malloc() return checks

PR: 71592
Submitted by: Dan Lukes <dan@obluda.cz> with further changes

Make ppp WARNS=5 clean

Add configuration option "set pppoe [standard|3Com]" which allows
to configure mode for ng_pppoe(4) node under control.

Reviewed by: brian
Approved by: julian (mentor)

Support a ``set rad_alive N'' command to enable periodic RADIUS accounting
information being sent to the RADIUS server.

Logging of RADIUS accounting information moves to a ``set log [+-]radius''
lev

Support a ``set rad_alive N'' command to enable periodic RADIUS accounting
information being sent to the RADIUS server.

Logging of RADIUS accounting information moves to a ``set log [+-]radius''
level, along with the RADIUS alive info, and the version number is bumped
to 3.2 to reflect this.

Mostly submitted by: alx@sm.ukrtel.net (back in January)
MFC after: 3 weeks

show more ...

Fix ``set ifaddr''. The code was actually using an uninitialised variable,
but conveniently, because ncpaddr.ncpaddr_family != AF_INET, the call to
ncpaddr_getip4addr() became a no-op leaving the lo

Fix ``set ifaddr''. The code was actually using an uninitialised variable,
but conveniently, because ncpaddr.ncpaddr_family != AF_INET, the call to
ncpaddr_getip4addr() became a no-op leaving the local address as it was
(defaulting to whatever my hostname resolves to).

PR: 62050
Submitted by: Peter Jeremy <peter.jeremy@alcatel.com.au>
MFC after: 3 days

show more ...

Add Cisco Skinny Station protocol support to libalias, natd, and ppp.
Skinny is the protocol used by Cisco IP phones to talk to Cisco Call
Managers. With this code, one can use a Cisco IP phone behi

Add Cisco Skinny Station protocol support to libalias, natd, and ppp.
Skinny is the protocol used by Cisco IP phones to talk to Cisco Call
Managers. With this code, one can use a Cisco IP phone behind a FreeBSD
NAT gateway.

Currently, having the Call Manager behind the NAT gateway is not supported.
More information on enabling Skinny support in libalias, natd, and ppp
can be found in those applications' manpages.

PR: 55843
Reviewed by: ru
Approved by: ru
MFC after: 30 days

show more ...

IPV6PREFIX is set when Framed-IPv6-Prefix is defined, You may
want to pass the value to upper layer protocol such as DHCPv6
for prefix delegation.

MFC after: 1 week

Don't install wrong IPv6 route by add command.

Add a ``force-scripts'' option for using chat scripts with -direct and
-dedicated links.

Submitted by: Maksim Yevmenkin <myevmenk@exodus.net>

Unbreak -DNOINET6

Submitted by: Andre Albsmeier <andre.albsmeier@mchp.siemens.de>
MFC after: 1 day

- made ppp compliant to RFC 2472 (based on a patch from another
contributor)
- support ipv6cpretry and ipv6cpretries, which are IPv6 versions
of ipcpretry and ipcpretries.
- improve handling of I

- made ppp compliant to RFC 2472 (based on a patch from another
contributor)
- support ipv6cpretry and ipv6cpretries, which are IPv6 versions
of ipcpretry and ipcpretries.
- improve handling of IPv6 link-local addresses

Submitted by: JINMEI Tatuya <jinmei@isl.rdc.toshiba.co.jp>

show more ...

Include the correct file (stdarg.h) and use va_list rather than _BSD_VA_LIST_

Suggested by: mike

Remove whitespace at the end of lines.

Bump the version number to reflect the recent RADIUS commits

Coerce pid_t to long rather than int for better portability.

Suggested by: Theo de Raadt <deraadt@openbsd.org>

Handle MS-CHAPv2 authentication correctly via the RADIUS server (if it's
configured).
Handle internal failures in radius_Authenticate() correctly.
Bump the ppp version number.

This doesn't yet work

Handle MS-CHAPv2 authentication correctly via the RADIUS server (if it's
configured).
Handle internal failures in radius_Authenticate() correctly.
Bump the ppp version number.

This doesn't yet work with MPPE. More will follow.

Sponsored by: Mozoon

show more ...

o Clean up some #includes
o Bump version number to 3.0.4
o When talking to a RADIUS server, provide a NAS-Port-Type.

When the NAS-Port-Type is Ethernet, provide a NAS-Port value equal
to the SES

o Clean up some #includes
o Bump version number to 3.0.4
o When talking to a RADIUS server, provide a NAS-Port-Type.

When the NAS-Port-Type is Ethernet, provide a NAS-Port value equal
to the SESSIONID from the environment in direct mode or the
NGM_PPPOE_SESSIONID message in other modes. If no SESSIONID is found,
default to the interface index in client mode or zero in server mode.

When the NAS-Port-Type is ISDN, set the NAS-Port to the minor number
of the physical device (ie, the N in /dev/i4brbchN).

This makes it easier for the RADIUS server to identify the client
WRT accounting data etc.

Prompted by: lsz8425 <lsz8425@mail.cd.hn.cn>

show more ...

Make ``set mru'' require a context. In multi-link mode, there's no
point in being allowed to ``set mru'' for the MP lcp layer.

Spotted by: Richard Browne <richb@timestone.com.au>
MFC after: 1 month

Bump the version to mark the fixed FSM TLD ordering

Usage style sweep: spell "usage" with a small 'u'.
Also change one case of blatant __progname abuse (several more remain)
This commit does not touch anything in src/{contrib,crypto,gnu}/.

Add variable substitutions for SOCKNAME, IPOCTETSIN, IPOCTETSOUT, IPPACKETSIN,
IPPACKETSOUT, IPV6OCTETSIN, IPV6OCTETSOUT, IPV6PACKETSIN, IPV6PACKETSOUT,
OCTETSIN, OCTETSOUT, PACKETSIN, PACKETSOUT and

Add variable substitutions for SOCKNAME, IPOCTETSIN, IPOCTETSOUT, IPPACKETSIN,
IPPACKETSOUT, IPV6OCTETSIN, IPV6OCTETSOUT, IPV6PACKETSIN, IPV6PACKETSOUT,
OCTETSIN, OCTETSOUT, PACKETSIN, PACKETSOUT and SOCKNAME.

show more ...

Make the way FSM options are processed easier to read by using structures
instead of u_char *.

The changes are cosmetic except:

RecvConfigAck() now displays the options that are being ACK'd
Hug

Make the way FSM options are processed easier to read by using structures
instead of u_char *.

The changes are cosmetic except:

RecvConfigAck() now displays the options that are being ACK'd
Huge (bogus) options sent from the peer won't cause an infinite loop
SendIdent and ReceiveIdent are displayed consistenlty with other FSM data
LCP AUTHPROTO options that aren't understood are NAK'd, not REJ'd

show more ...

Merge the NETGRAPH branch into HEAD. tty devices now use netgraph's line
discipline to do the async escaping, but no other benefits are available yet.

Change ``ifdef HAVE_DES'' to ``ifndef NODES''

Merge the NETGRAPH branch into HEAD. tty devices now use netgraph's line
discipline to do the async escaping, but no other benefits are available yet.

Change ``ifdef HAVE_DES'' to ``ifndef NODES'' for consistency.

Make the Makefile a little more sane WRT RELEASE_CRUNCH.

show more ...