Use IEEE80211_RATE_MAXSIZE instead of IEEE80211_RATE_SIZE to validate the
rate set element id from an AP. This allows stations to associate with
AP's that violate the 802.11 spec by sending >8 rates

Use IEEE80211_RATE_MAXSIZE instead of IEEE80211_RATE_SIZE to validate the
rate set element id from an AP. This allows stations to associate with
AP's that violate the 802.11 spec by sending >8 rates. This corrects a
recent regression; older code did likewise.

show more ...

add monitor mode

o change ieee80211_new_state handling to use a proper method that drivers
override in their sub-class; this eliminates the hack of interpreting the
EINPROGRESS return value to mean "don't do any

o change ieee80211_new_state handling to use a proper method that drivers
override in their sub-class; this eliminates the hack of interpreting the
EINPROGRESS return value to mean "don't do any of the normal work"
o correct active scanning so the first channel is only scanned once and so
per-channel passive mode is properly honored
o expose 802.11 FSM state names so every driver doesn't keep a private copy
o eliminate node parameter to ieee80211_begin_scan; it was not being used

show more ...

revise copyright notices per discussion with Atsushi Onoe <onoe@sm.sony.co.jp>

add comment

fix tcpdump -y IEEE802_11; NBPFILTER was a holdover from netbsd compatibility

new 802.11 layer:

o code reorg (relative to old netbsd-derived code) for future growth
o drivers now specify available channels and rates and 802.11 layer handles
almost all ifmedia actions
o mult

new 802.11 layer:

o code reorg (relative to old netbsd-derived code) for future growth
o drivers now specify available channels and rates and 802.11 layer handles
almost all ifmedia actions
o multi-mode support for 11a/b/g devices
o 11g protocol additions (incomplete)
o new element id additions (for other than 11g)
o node/station table redone for proper locking and to eliminate driver
incestuousness
o split device flags and capabilities to reduce confusion and provide room
for expansion
o incomplete power management infrastructure (need to revisit)
o incomplete hooks for software retry
o more...

show more ...

Constify vap argument of ieee80211_{note,discard}* functions.

MFC after: 1 week

- MFC from head@196987

Fix a typo in ifdef mesh support. This would make mesh unworkable if
TDMA support was compiled out.

Approved by: re (kib)

- MFC @196061

More mesh bits, namely:
* bridge support (sam)
* handling of errors (sam)
* deletion of inactive routing entries
* more debug msgs (sam)
* fixed some inconsistencies with the spec.
* decap is now spe

More mesh bits, namely:
* bridge support (sam)
* handling of errors (sam)
* deletion of inactive routing entries
* more debug msgs (sam)
* fixed some inconsistencies with the spec.
* decap is now specific to mesh (sam)
* print mesh seq. no. on ifconfig list mesh
* small perf. improvements

Reviewed by: sam
Approved by: re (kib)

show more ...

Move code that does payload realigment to a new routine, ieee80211_realign,
so it can be reused. While here rewrite the logic to always use a single mbuf.

Reviewed by: rpaulo
Approved by: re (kib)

Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final nex

Implementation of the upcoming Wireless Mesh standard, 802.11s, on the
net80211 wireless stack. This work is based on the March 2009 D3.0 draft
standard. This standard is expected to become final next year.
This includes two main net80211 modules, ieee80211_mesh.c
which deals with peer link management, link metric calculation,
routing table control and mesh configuration and ieee80211_hwmp.c
which deals with the actually routing process on the mesh network.
HWMP is the mandatory routing protocol on by the mesh standard, but
others, such as RA-OLSR, can be implemented.

Authentication and encryption are not implemented.

There are several scripts under tools/tools/net80211/scripts that can be
used to test different mesh network topologies and they also teach you
how to setup a mesh vap (for the impatient: ifconfig wlan0 create
wlandev ... wlanmode mesh).

A new build option is available: IEEE80211_SUPPORT_MESH and it's enabled
by default on GENERIC kernels for i386, amd64, sparc64 and pc98.

Drivers that support mesh networks right now are: ath, ral and mwl.

More information at: http://wiki.freebsd.org/WifiMesh

Please note that this work is experimental. Also, please note that
bridging a mesh vap with another network interface is not yet supported.

Many thanks to the FreeBSD Foundation for sponsoring this project and to
Sam Leffler for his support.
Also, I would like to thank Gateworks Corporation for sending me a
Cambria board which was used during the development of this project.

Reviewed by: sam
Approved by: re (kensmith)
Obtained from: projects/mesh11s

show more ...

- Merge from HEAD

iv_flags_ext is full, make room by moving HT-related flags to a new
iv_flags_ht word

Resync with head.

o station mode channel switch support
o IEEE80211_IOC_CHANSWITCH fixups:
- restrict to hostap vaps
- return EOPNOTSUPP instead of EINVAL when applied to !hostap vap
or to a vap w/o 11h enable

o station mode channel switch support
o IEEE80211_IOC_CHANSWITCH fixups:
- restrict to hostap vaps
- return EOPNOTSUPP instead of EINVAL when applied to !hostap vap
or to a vap w/o 11h enabled
- interpret count of 0 to mean cancel the current CSA

Reviewed by: rpaulo, avatar

show more ...

Resync with head.

Fix monitor mode vaps to work as intended:
o track # bpf taps on monitor mode vaps instead of # monitor mode vaps
o spam monitor mode taps on tx/rx
o fix ieee80211_radiotap_rx_all to dispatch frames

Fix monitor mode vaps to work as intended:
o track # bpf taps on monitor mode vaps instead of # monitor mode vaps
o spam monitor mode taps on tx/rx
o fix ieee80211_radiotap_rx_all to dispatch frames only if the vap is up
o while here print radiotap (and superg) state in show com

show more ...

don't dispatch frames to vap's not running

Merge from HEAD

Overhaul monitor mode handling:
o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO
and remove explicit bpf support from wireless drivers; drivers now
use ieee80211_radiotap_at

Overhaul monitor mode handling:
o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO
and remove explicit bpf support from wireless drivers; drivers now
use ieee80211_radiotap_attach to setup shared data structures that
hold the radiotap header for each packet tx/rx
o remove rx timestamp from the rx path; it was used only by the tdma support
for debugging and was mostly useless due to it being 32-bits and mostly
unavailable
o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and
per-com state when there are active taps
o track the number of monitor mode vaps
o use bpf tap and monitor mode vap state to decide when to collect radiotap
state and dispatch frames; drivers no longer explicitly directly check
bpf state or use bpf calls to tap frames
o handle radiotap state updates on channel change in net80211; drivers
should not do this (unless they bypass net80211 which is almost always
a mistake)
o update various drivers to be more consistent/correct in handling radiotap
o update ral to include TSF in radiotap'd frames
o add promisc mode callback to wi

Reviewed by: cbzimmer, rpaulo, thompsa

show more ...

- Merge from HEAD

split Atheros SuperG support out into it's own file that's included only
with a new IEEE80211_SUPPORT_SUPERG option