Add a new field for extended HT capabilities.

Submitted by: Alexander Egorenkov <egorenar at gmail.com>
MFC after: 2 weeks
Sponsored by: iXsystems, inc.

Unbreak build by removing a code bit that is only related to other code
in my branch.

Fix a couple of bugs with 802.11n:
o Process the BAR frame on the adhoc, mesh and sta modes
o Fix the format of the ADDBA reply frame
o Fix references to the spec section numbers

Also, print the all

Fix a couple of bugs with 802.11n:
o Process the BAR frame on the adhoc, mesh and sta modes
o Fix the format of the ADDBA reply frame
o Fix references to the spec section numbers

Also, print the all the MCS rates in bootverbose.

Sponsored by: iXsystems, Inc.
Obtained from: //depot/user/rpaulo/80211n/...

show more ...

- MFC @196061

Revamp 802.11 action frame handling:
o add a new facility for components to register send+recv handlers
o ieee80211_send_action and ieee80211_recv_action now use the registered
handlers to dispatch

Revamp 802.11 action frame handling:
o add a new facility for components to register send+recv handlers
o ieee80211_send_action and ieee80211_recv_action now use the registered
handlers to dispatch operations
o rev ieee80211_send_action api to enable passing arbitrary data
o rev ieee80211_recv_action api to pass the 802.11 frame header as it may
be difficult to locate
o update existing IEEE80211_ACTION_CAT_BA and IEEE80211_ACTION_CAT_HT handling
o update mwl for api rev

Reviewed by: rpaulo
Approved by: re (kensmith)

show more ...

- Merge from HEAD

Correct ieee80211_gettid:
o don't increment extracted tid, this was a vestige of IEEE80211_NONQOS_TID
being defined as 0 (w/ real tid's +1)
o handle 4-address frames (add IEEE80211_IS_DSTODS to che

Correct ieee80211_gettid:
o don't increment extracted tid, this was a vestige of IEEE80211_NONQOS_TID
being defined as 0 (w/ real tid's +1)
o handle 4-address frames (add IEEE80211_IS_DSTODS to check if an 802.11
header is DSTODS)

Submitted by: cbzimmer
Reviewed by: avatar

show more ...

iv_flags_ext is full, make room by moving HT-related flags to a new
iv_flags_ht word

distribute sysctl decls so global variables can be made static

Merge from HEAD

Overhaul monitor mode handling:
o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO
and remove explicit bpf support from wireless drivers; drivers now
use ieee80211_radiotap_at

Overhaul monitor mode handling:
o replace DLT_IEEE802_11 support in net80211 with DLT_IEEE802_11_RADIO
and remove explicit bpf support from wireless drivers; drivers now
use ieee80211_radiotap_attach to setup shared data structures that
hold the radiotap header for each packet tx/rx
o remove rx timestamp from the rx path; it was used only by the tdma support
for debugging and was mostly useless due to it being 32-bits and mostly
unavailable
o track DLT_IEEE80211_RADIO bpf attachments and maintain per-vap and
per-com state when there are active taps
o track the number of monitor mode vaps
o use bpf tap and monitor mode vap state to decide when to collect radiotap
state and dispatch frames; drivers no longer explicitly directly check
bpf state or use bpf calls to tap frames
o handle radiotap state updates on channel change in net80211; drivers
should not do this (unless they bypass net80211 which is almost always
a mistake)
o update various drivers to be more consistent/correct in handling radiotap
o update ral to include TSF in radiotap'd frames
o add promisc mode callback to wi

Reviewed by: cbzimmer, rpaulo, thompsa

show more ...

Merge from HEAD

allow drivers to hook ampdu rx start/stop

o change ieee80211_mgmt_output to take a raw xmit parameters block so
the net80211 layer has complete control over the handling of mgt frames
(in particular, the ac, tx rate, and retry count); th

o change ieee80211_mgmt_output to take a raw xmit parameters block so
the net80211 layer has complete control over the handling of mgt frames
(in particular, the ac, tx rate, and retry count); this also allows us
to purge the M_LINK0 flag that was attached to mbufs to mark them as
needing encryption for shared key auth
o change ieee80211_send_setup to take a tid parameter so it can be used
to setup QoS frames

show more ...

Sync BAR frame handling with out of tree work:
o correct BAR frame construction for AMPDU
o retransmit BAR frames until ACK'd or timeout (use tunables to
control behaviour, default is very aggressi

Sync BAR frame handling with out of tree work:
o correct BAR frame construction for AMPDU
o retransmit BAR frames until ACK'd or timeout (use tunables to
control behaviour, default is very aggressive)
o defer seq# update until BAR frame is ACK'd
o add BAR response handling callback for driver to interpose and
push new state to device or push pending aggregates

While here also:
o add backpointer to node in the per-tid tx aggregation data structure
o move ampdu tx state setup/teardown work to separate functions

show more ...

cleanup after merge

Fix handling of shortgi: use the local configuration (and implicitly
device capabilities) to decide whether to use short gi. Drivers
inspect ni_flags to decide whether to send a frame w/ short sgi.

RIFS support; needs driver callback for dynamic state change

MIMO power save support; still needs callbacks for notifying drivers
of dynamic state change in station mode.

Revamp ht ie handling:
o change ieee80211_parse_htcap and ieee80211_parse_htinfo to save only
internal state obtained from the ie's; no dynamic state such as
ni_chw is altered
o add ieee80211_ht_

Revamp ht ie handling:
o change ieee80211_parse_htcap and ieee80211_parse_htinfo to save only
internal state obtained from the ie's; no dynamic state such as
ni_chw is altered
o add ieee80211_ht_updateparams to parse ht cap+info ie's and update
dynamic node state
o change ieee80211_ht_node_init to not take an htcap ie that is parsed;
instead have the caller make a separate call as one caller wants to
parse the ie while another wants to parse both cap+info ie's and
update state so can better do this with ieee80211_ht_updateparams

These changes fix sta mode state handling where the node's channel
width was shifted to ht20/ht40 prematurely.

show more ...

don't propagate ht bss occupancy changes to legacy vaps;
they won't have an htinfo ie to update

change ieee80211_ampdu_stop to take an explicit reason code

simplify debug msg

Cleanup AMPDU handling:

For receive:
o explicitly tag rx frames w/ M_AMPDU instead of passing frames through
the reorder processing according to the node having HT and the frame
being QoS data
o

Cleanup AMPDU handling:

For receive:
o explicitly tag rx frames w/ M_AMPDU instead of passing frames through
the reorder processing according to the node having HT and the frame
being QoS data
o relax ieee80211_ampdu_reorder asserts to allow any frame to be passed
in, unsuitable frames are returned to the caller for normal processing;
this permits drivers that cannot inspect the PLCP to mark all data
frames as potential ampdu candidates with only a small penalty
o add M_AMPDU_MPDU to identify frames resubmitted from the reorder q

For transmit:
o tag aggregation candidates with M_AMPDU_MPDU
o fix the QoS ack policy set in ampdu subframes; we only support immediate
BA streams which should be marked for "normal ack" to get implicit block
ack behaviour; interestingly certain vendor parts BA'd frames with the
11e BA ack policy set
o do not assign a sequence # to aggregation candidates; this must be done
when frames are submitted for transmit (NB: this can/will be handled
better when aggregation is pulled up to net80211)

show more ...

Always update ic_lastnonht so we track overlapping legacy bss
properly; was doing this only on a change in the protection mode
so the advertised protection mode in the beacon would oscillate.

Submit

Always update ic_lastnonht so we track overlapping legacy bss
properly; was doing this only on a change in the protection mode
so the advertised protection mode in the beacon would oscillate.

Submitted by: Chris Zimmermann

show more ...