Merge ^/head r340918 through r341763.

arm64: allwinner: Add a dtbo to have cpu operating points

This enables cpufreq on A64 boards.

MFC after: 1 month

Merge ^/head r338026 through r338297, and resolve conflicts.

arm64: Add DTS overlays for A64

- sun50i-a64-sid.dtso registers the Security ID node, needed for thermal
- sun50i-a64-ths.dtso registers the thermal node, for which we already have a
driver
- sun

arm64: Add DTS overlays for A64

- sun50i-a64-sid.dtso registers the Security ID node, needed for thermal
- sun50i-a64-ths.dtso registers the thermal node, for which we already have a
driver
- sun50i-a64-timer.dtso registers the timer node, needed as the generic timer
glitch on A64 SoC.

Approved by: re (gjb)

show more ...

dtb: Allwinner: Add aarch64 dts files

dtb/allwinner: Build sun8i-h2-plus-orangepi-r1.dts
We have a u-boot port for this board so add the dtb to the build.

dtb/allwinner: Add a83t-sid overlay

arm: dts: overlays: Remove the overlay module

Move the DTSO variables in the main SoC dtb file

Discussed with: ian

dtb/allwinner: Build sun8i-h3-nanopi-m1-plus.dts

We have a u-boot port for this board so add the dtb to the build.

dtb/allwinner: Add sun7i-a20-lamobo-r1.dts (Banana Pi R1)

FreeBSD boots on this board, but the ethernet switch is not currently
supported, resulting in no ethernet.

A U-Boot port will be added once

dtb/allwinner: Add sun7i-a20-lamobo-r1.dts (Banana Pi R1)

FreeBSD boots on this board, but the ethernet switch is not currently
supported, resulting in no ethernet.

A U-Boot port will be added once the ethernet switch is at least basically
supported, but we add its DTS to the build here to lower the barrier-to-boot
while work is underway.

show more ...

dtb/allwinner: Restore a83t/BananaPi-M3 DTS after r342822

sinovoip-bpi-m3.dts was disconnected from the build in r324822. Since then,
a CCU driver has been added and several other changes have been

dtb/allwinner: Restore a83t/BananaPi-M3 DTS after r342822

sinovoip-bpi-m3.dts was disconnected from the build in r324822. Since then,
a CCU driver has been added and several other changes have been made to
make us compatible with upstream DTS for this board.

Add links for older DTB that might be used: our u-boot port was expecting
sinovoip-bpi-m3.dtb up until ports r455629, and our u-boot will not be
switching to the upstream name (sun8i-a83t-bananapi-m3) quite yet.

Discussed with: manu

show more ...

Merge ^/head r325842 through r325998.

dts: Allwinner: Remove our last custom DTS

All Allwinner boards should use the upstream DTS so remove our
remaining custom ones.

Merge ^/head r323559 through r325504.

MFhead@r324837

While here, diff reduce some of the changes in sys/boot by moving
MK_COVERAGE=no to sys/boot/Makefile.inc .

dtb/allwinner: Disconnect sinovoip-bpi-m3.dts from the build

No active commiter have this board and we diverged too much from
the upstream DTS.

Merge ^/head r321383 through r322397.

MFhead@r321970

MFhead@r321897

Allwinner dtb: Add NanoPi M1 to the build

It was tested on NanoPi M1 Plus.

Allwinner dtb: add link for NanoPi Neo

Reported by: Richard Puga <richard@puga.net>
Tested by: Richard Puga <richard@puga.net>, myself

MFhead@r320180

Merge ^/head r319973 through 321382.

Merge ^/head r320042 through r320397.

Allwinner: Add support for H2 Plus SoC

H2+ SoC is a stripped down version of H3 without gigabit ethernet and 4K HDMI.
Also add sun8i-h2-plus-orangepi-zero.dts to the build as we run on this board.