Rename P_THREADED to P_SA. P_SA means a process is using scheduler
activations.

Use __FBSDID().

When we are spilling threads out of the run queue during panic, make sure we
keep the thread state variable consistent with its real state.
i.e. Don't say it's on the run queue when it isn't.

Also c

When we are spilling threads out of the run queue during panic, make sure we
keep the thread state variable consistent with its real state.
i.e. Don't say it's on the run queue when it isn't.

Also clarify the associated comment.

Turns a double panic back to a single panic :-/

Approved by: re@ (jhb)

show more ...

Commit a partial lazy thread switch mechanism for i386. it isn't as lazy
as it could be and can do with some more cleanup. Currently its under
options LAZY_SWITCH. What this does is avoid %cr3 rel

Commit a partial lazy thread switch mechanism for i386. it isn't as lazy
as it could be and can do with some more cleanup. Currently its under
options LAZY_SWITCH. What this does is avoid %cr3 reloads for short
context switches that do not involve another user process. ie: we can
take an interrupt, switch to a kthread and return to the user without
explicitly flushing the tlb. However, this isn't as exciting as it could
be, the interrupt overhead is still high and too much blocks on Giant
still. There are some debug sysctls, for stats and for an on/off switch.

The main problem with doing this has been "what if the process that you're
running on exits while we're borrowing its address space?" - in this case
we use an IPI to give it a kick when we're about to reclaim the pmap.

Its not compiled in unless you add the LAZY_SWITCH option. I want to fix a
few more things and get some more feedback before turning it on by default.

This is NOT a replacement for Bosko's lazy interrupt stuff. This was more
meant for the kthread case, while his was for interrupts. Mine helps a
little for interrupts, but his helps a lot more.

The stats are enabled with options SWTCH_OPTIM_STATS - this has been a
pseudo-option for years, I just added a bunch of stuff to it.

One non-trivial change was to select a new thread before calling
cpu_switch() in the first place. This allows us to catch the silly
case of doing a cpu_switch() to the current process. This happens
uncomfortably often. This simplifies a bit of the asm code in cpu_switch
(no longer have to call choosethread() in the middle). This has been
implemented on i386 and (thanks to jake) sparc64. The others will come
soon. This is actually seperate to the lazy switch stuff.

Glanced at by: jake, jhb

show more ...

Adjust code for userland preemptive. Userland can set a quantum in
kse_mailbox to schedule an upcall, this is useful for userland timeout
routine, for example pthread_cond_timedwait().

Also extract

Adjust code for userland preemptive. Userland can set a quantum in
kse_mailbox to schedule an upcall, this is useful for userland timeout
routine, for example pthread_cond_timedwait().

Also extract upcall scheduling code from kse_reassign and create
a new function called thread_switchout to include these code.

Reviewed by: julain

show more ...

Cosmetic change, make it QUEUE_MACRO_DEBUG friendly

Change the process flags P_KSES to be P_THREADED.
This is just a cosmetic change but I've been meaning to do it for about a year.

Update comments to reflect new KSE code.

Move code for detecting PS_NEEDSIGCHK into thread_schedule_upcall,
I think it is a better place to handle it.

Move a bunch of flags from the KSE to the thread.
I was in two minds as to where to put them in the first case..
I should have listenned to the other mind.

Submitted by: parts by davidxu@
Reviewed

Move a bunch of flags from the KSE to the thread.
I was in two minds as to where to put them in the first case..
I should have listenned to the other mind.

Submitted by: parts by davidxu@
Reviewed by: jeff@ mini@

show more ...

- Split the struct kse into struct upcall and struct kse. struct kse will
soon be visible only to schedulers. This greatly simplifies much the
KSE code.

Submitted by: davidxu

Reversion of commit by Davidxu plus fixes since applied.

I'm not convinced there is anything major wrong with the patch but
them's the rules..

I am using my "David's mentor" hat to revert this as h

Reversion of commit by Davidxu plus fixes since applied.

I'm not convinced there is anything major wrong with the patch but
them's the rules..

I am using my "David's mentor" hat to revert this as he's
offline for a while.

show more ...

Move UPCALL related data structure out of kse, introduce a new
data structure called kse_upcall to manage UPCALL. All KSE binding
and loaning code are gone.

A thread owns an upcall can collect all c

Move UPCALL related data structure out of kse, introduce a new
data structure called kse_upcall to manage UPCALL. All KSE binding
and loaning code are gone.

A thread owns an upcall can collect all completed syscall contexts in
its ksegrp, turn itself into UPCALL mode, and takes those contexts back
to userland. Any thread without upcall structure has to export their
contexts and exit at user boundary.

Any thread running in user mode owns an upcall structure, when it enters
kernel, if the kse mailbox's current thread pointer is not NULL, then
when the thread is blocked in kernel, a new UPCALL thread is created and
the upcall structure is transfered to the new UPCALL thread. if the kse
mailbox's current thread pointer is NULL, then when a thread is blocked
in kernel, no UPCALL thread will be created.

Each upcall always has an owner thread. Userland can remove an upcall by
calling kse_exit, when all upcalls in ksegrp are removed, the group is
atomatically shutdown. An upcall owner thread also exits when process is
in exiting state. when an owner thread exits, the upcall it owns is also
removed.

KSE is a pure scheduler entity. it represents a virtual cpu. when a thread
is running, it always has a KSE associated with it. scheduler is free to
assign a KSE to thread according thread priority, if thread priority is changed,
KSE can be moved from one thread to another.

When a ksegrp is created, there is always N KSEs created in the group. the
N is the number of physical cpu in the current system. This makes it is
possible that even an userland UTS is single CPU safe, threads in kernel still
can execute on different cpu in parallel. Userland calls kse_create to add more
upcall structures into ksegrp to increase concurrent in userland itself, kernel
is not restricted by number of upcalls userland provides.

The code hasn't been tested under SMP by author due to lack of hardware.

Reviewed by: julian

show more ...

Remove a KASSERT that can now happen and add a missing setrunnable.

Add code to ddb to allow backtracing an arbitrary thread.
(show thread {address})

Remove the IDLE kse state and replace it with a change in
the way threads sahre KSEs. Every KSE now has a thread, wh

Add code to ddb to allow backtracing an arbitrary thread.
(show thread {address})

Remove the IDLE kse state and replace it with a change in
the way threads sahre KSEs. Every KSE now has a thread, which is
considered its "owner" however a KSE may also be lent to other
threads in the same group to allow completion of in-kernel work.
n this case the owner remains the same and the KSE will revert to the
owner when the other work has been completed.

All creations of upcalls etc. is now done from
kse_reassign() which in turn is called from mi_switch or
thread_exit(). This means that special code can be removed from
msleep() and cv_wait().

kse_release() does not leave a KSE with no thread any more but
converts the existing thread into teh KSE's owner, and sets it up
for doing an upcall. It is just inhibitted from being scheduled until
there is some reason to do an upcall.

Remove all trace of the kse_idle queue since it is no-longer needed.
"Idle" KSEs are now on the loanable queue.

show more ...

Did you ever notice how stupid bugs show up much clearer
when you see them in a commit message?

Tidy up the scheduler's code for changing the priority of a thread.
Logically pretty much a NOP.

- Create a new scheduler api that is defined in sys/sched.h
- Begin moving scheduler specific functionality into sched_4bsd.c
- Replace direct manipulation of scheduler data with hooks provided by

- Create a new scheduler api that is defined in sys/sched.h
- Begin moving scheduler specific functionality into sched_4bsd.c
- Replace direct manipulation of scheduler data with hooks provided by the
new api.
- Remove KSE specific state modifications and single runq assumptions from
kern_switch.c

Reviewed by: -arch

show more ...

Round out the facilty for a 'bound' thread to loan out its KSE
in specific situations. The owner thread must be blocked, and the
borrower can not proceed back to user space with the borrowed KSE.
The

Round out the facilty for a 'bound' thread to loan out its KSE
in specific situations. The owner thread must be blocked, and the
borrower can not proceed back to user space with the borrowed KSE.
The borrower will return the KSE on the next context switch where
teh owner wants it back. This removes a lot of possible
race conditions and deadlocks. It is consceivable that the
borrower should inherit the priority of the owner too.
that's another discussion and would be simple to do.

Also, as part of this, the "preallocatd spare thread" is attached to the
thread doing a syscall rather than the KSE. This removes the need to lock
the scheduler when we want to access it, as it's now "at hand".

DDB now shows a lot mor info for threaded proceses though it may need
some optimisation to squeeze it all back into 80 chars again.
(possible JKH project)

Upcalls are now "bound" threads, but "KSE Lending" now means that
other completing syscalls can be completed using that KSE before the upcall
finally makes it back to the UTS. (getting threads OUT OF THE KERNEL is
one of the highest priorities in the KSE system.) The upcall when it happens
will present all the completed syscalls to the KSE for selection.

show more ...

set ke_bound to NULL when kse owner thread becomes runnable.

Reviewed by: julian (mentor)

Implement basic KSE loaning. This stops a hread that is blocked in BOUND mode
from stopping another thread from completing a syscall, and this allows it to
release its resources etc. Probably more re

Implement basic KSE loaning. This stops a hread that is blocked in BOUND mode
from stopping another thread from completing a syscall, and this allows it to
release its resources etc. Probably more related commits to follow (at least
one I know of)

Initial concept by: julian, dillon
Submitted by: davidxu

show more ...

Indentation does not define a block.. you need breces {} as well..
also add a mutex assert. (threaded path only)

Submitted by: davidxu

Allocate KSEs and KSEGRPs separatly and remove them from the proc structure.
next step is to allow > 1 to be allocated per process. This would give
multi-processor threads. (when the rest of the infr

Allocate KSEs and KSEGRPs separatly and remove them from the proc structure.
next step is to allow > 1 to be allocated per process. This would give
multi-processor threads. (when the rest of the infrastructure is
in place)

While doing this I noticed libkvm and sys/kern/kern_proc.c:fill_kinfo_proc
are diverging more than they should.. corrective action needed soon.

show more ...

Completely redo thread states.

Reviewed by: davidxu@freebsd.org

Rejig the code to figure out estcpu and work out how long a KSEGRP has been
idle. What was there before was surprisingly ALMOST correct.

Peter and I fried our brains on this for a couple of hours fi

Rejig the code to figure out estcpu and work out how long a KSEGRP has been
idle. What was there before was surprisingly ALMOST correct.

Peter and I fried our brains on this for a couple of hours figuring out
what this actually means in the context of multiple threads.

Reviewed by: peter@freebsd.org

show more ...