Move code block added in 1.157 to a safer part of fork1().

Submitted by: jake

Kernel modifications necessary to allow to follow fork()ed children.

PR: bin/25587 (in part)
MFC after: 3 weeks

Update docs to reflect change in count of procs reserved for root
from 1 to 10.

PR: kern/40515
Submitted by: David Schultz <dschultz@uclink.Berkeley.EDU>
MFC after: 1 day

Wire the sysctl output buffer before grabbing any locks to prevent
SYSCTL_OUT() from blocking while locks are held. This should
only be done when it would be inconvenient to make a temporary copy of

Wire the sysctl output buffer before grabbing any locks to prevent
SYSCTL_OUT() from blocking while locks are held. This should
only be done when it would be inconvenient to make a temporary copy of
the data and defer calling SYSCTL_OUT() until after the locks are
released.

show more ...

part of a greater patch set..
1/ don't need to set td_state to TDS_RUNNING in fork_return.
it's already set in choosethread().
2/ Set a child process state to "normal" as opposed to "new"
when we all

part of a greater patch set..
1/ don't need to set td_state to TDS_RUNNING in fork_return.
it's already set in choosethread().
2/ Set a child process state to "normal" as opposed to "new"
when we allow it to be put on the run queue.
Allows child to receive signals from the parent if the parent
runs first and tries to immediatly signal he child.

Submitted by: (part 2) Thomas Moestl <tmoestl@gmx.net>

show more ...

Thinking about it I came to the conclusion that the KSE states were incorrectly
formulated. The correct states should be:
IDLE: On the idle KSE list for that KSEG
RUNQ: Linked onto the system run

Thinking about it I came to the conclusion that the KSE states were incorrectly
formulated. The correct states should be:
IDLE: On the idle KSE list for that KSEG
RUNQ: Linked onto the system run queue.
THREAD: Attached to a thread and slaved to whatever state the thread is in.

This means that most places where we were adjusting kse state can go away
as it is just moving around because the thread is..
The only places we need to adjust the KSE state is in transition to and from
the idle and run queues.

Reviewed by: jhb@freebsd.org

show more ...

Revert removal of cred_free_thread(): It is used to ensure that a thread's
credentials are not improperly borrowed when the thread is not current in
the kernel.

Requested by: jhb, alfred

Part 1 of KSE-III

The ability to schedule multiple threads per process
(one one cpu) by making ALL system calls optionally asynchronous.
to come: ia64 and power-pc patches, patches for gdb, test pro

Part 1 of KSE-III

The ability to schedule multiple threads per process
(one one cpu) by making ALL system calls optionally asynchronous.
to come: ia64 and power-pc patches, patches for gdb, test program (in tools)

Reviewed by: Almost everyone who counts
(at various times, peter, jhb, matt, alfred, mini, bernd,
and a cast of thousands)

NOTE: this is still Beta code, and contains lots of debugging stuff.
expect slight instability in signals..

show more ...

Remove unused diagnostic function cread_free_thread().

Approved by: alfred

- Proper locking for p_tracep and p_traceflag.
- Catch up to new ktrace API.

- Protect randompid and nprocs with the allproc_lock.
- Reorder fork1() to do malloc() and other blocking operations prior to
acquiring the needed process locks.
- The new process inherit's the cre

- Protect randompid and nprocs with the allproc_lock.
- Reorder fork1() to do malloc() and other blocking operations prior to
acquiring the needed process locks.
- The new process inherit's the credentials of curthread, not the
credentials of the old process.
- Document a really weird race that will come up with KSE allows multiple
kernel threads per process.

show more ...

Lock proctree_lock instead of pgrpsess_lock.

Whitespace changes to wrap long lines.

Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zon

Change callers of mtx_init() to pass in an appropriate lock type name. In
most cases NULL is passed, but in some cases such as network driver locks
(which use the MTX_NETWORK_LOCK macro) and UMA zone locks, a name is used.

Tested on: i386, alpha, sparc64

show more ...

Fix leakage of p_pgrp lock.

Stage-2 commit of the critical*() code. This re-inlines cpu_critical_enter()
and cpu_critical_exit() and moves associated critical prototypes into their
own header file, <arch>/<arch>/critical.h, wh

Stage-2 commit of the critical*() code. This re-inlines cpu_critical_enter()
and cpu_critical_exit() and moves associated critical prototypes into their
own header file, <arch>/<arch>/critical.h, which is only included by the
three MI source files that need it.

Backout and re-apply improperly comitted syntactical cleanups made to files
that were still under active development. Backout improperly comitted program
structure changes that moved localized declarations to the top of two
procedures. Partially re-apply one of the program structure changes to
move 'mask' into an intermediate block rather then in three separate
sub-blocks to make the code more readable. Re-integrate bug fixes that Jake
made to the sparc64 code.

Note: In general, developers should not gratuitously move declarations out
of sub-blocks. They are where they are for reasons of structure, grouping,
readability, compiler-localizability, and to avoid developer-introduced bugs
similar to several found in recent years in the VFS and VM code.

Reviewed by: jake

show more ...

Make the reference counting of 'struct pargs' SMP safe.

There is still some locations where the PROC lock should be held
in order to prevent inconsistent views from outside (like the
proc->p_fd fix

Make the reference counting of 'struct pargs' SMP safe.

There is still some locations where the PROC lock should be held
in order to prevent inconsistent views from outside (like the
proc->p_fd fix for kern/vfs_syscalls.c:checkdirs()) that can be
fixed later.

Submitted by: Jonathan Mini <mini@haikugeek.com>

show more ...

Add a new mtx_init option "MTX_DUPOK" which allows duplicate acquires of locks
with this flag. Remove the dup_list and dup_ok code from subr_witness. Now
we just check for the flag instead of doing

Add a new mtx_init option "MTX_DUPOK" which allows duplicate acquires of locks
with this flag. Remove the dup_list and dup_ok code from subr_witness. Now
we just check for the flag instead of doing string compares.

Also, switch the process lock, process group lock, and uma per cpu locks over
to this interface. The original mechanism did not work well for uma because
per cpu lock names are unique to each zone.

Approved by: jhb

show more ...

Compromise for critical*()/cpu_critical*() recommit. Cleanup the interrupt
disablement assumptions in kern_fork.c by adding another API call,
cpu_critical_fork_exit(). Cleanup the td_savecrit field

Compromise for critical*()/cpu_critical*() recommit. Cleanup the interrupt
disablement assumptions in kern_fork.c by adding another API call,
cpu_critical_fork_exit(). Cleanup the td_savecrit field by moving it
from MI to MD. Temporarily move cpu_critical*() from <arch>/include/cpufunc.h
to <arch>/<arch>/critical.c (stage-2 will clean this up).

Implement interrupt deferral for i386 that allows interrupts to remain
enabled inside critical sections. This also fixes an IPI interlock bug,
and requires uses of icu_lock to be enclosed in a true interrupt disablement.

This is the stage-1 commit. Stage-2 will occur after stage-1 has stabilized,
and will move cpu_critical*() into its own header file(s) + other things.
This commit may break non-i386 architectures in trivial ways. This should
be temporary.

Reviewed by: core
Approved by: core

show more ...

Add a change mirroring that made to kern/subr_trap.c and others.

This makes kernel builds with DIAGNOSTIC work again.

Apparently forgotten by: jhb
Might want to be checked by: jhb

Remove references to vm_zone.h and switch over to the new uma API.

Also, remove maxsockets. If you look carefully you'll notice that the old
zone allocator never honored this anyway.

revert last commit temporarily due to whining on the lists.

STAGE-1 of 3 commit - allow (but do not require) interrupts to remain
enabled in critical sections and streamline critical_enter() and
critical_exit().

This commit allows an architecture to leave in

STAGE-1 of 3 commit - allow (but do not require) interrupts to remain
enabled in critical sections and streamline critical_enter() and
critical_exit().

This commit allows an architecture to leave interrupts enabled inside
critical sections if it so wishes. Architectures that do not wish to do
this are not effected by this change.

This commit implements the feature for the I386 architecture and provides
a sysctl, debug.critical_mode, which defaults to 1 (use the feature). For
now you can turn the sysctl on and off at any time in order to test the
architectural changes or track down bugs.

This commit is just the first stage. Some areas of the code, specifically
the MACHINE_CRITICAL_ENTER #ifdef'd code, is strictly temporary and will
be cleaned up in the STAGE-2 commit when the critical_*() functions are
moved entirely into MD files.

The following changes have been made:

* critical_enter() and critical_exit() for I386 now simply increment
and decrement curthread->td_critnest. They no longer disable
hard interrupts. When critical_exit() decrements the counter to
0 it effectively calls a routine to deal with whatever interrupts
were deferred during the time the code was operating in a critical
section.

Other architectures are unaffected.

* fork_exit() has been conditionalized to remove MD assumptions for
the new code. Old code will still use the old MD assumptions
in regards to hard interrupt disablement. In STAGE-2 this will
be turned into a subroutine call into MD code rather then hardcoded
in MI code.

The new code places the burden of entering the critical section
in the trampoline code where it belongs.

* I386: interrupts are now enabled while we are in a critical section.
The interrupt vector code has been adjusted to deal with the fact.
If it detects that we are in a critical section it currently defers
the interrupt by adding the appropriate bit to an interrupt mask.

* In order to accomplish the deferral, icu_lock is required. This
is i386-specific. Thus icu_lock can only be obtained by mainline
i386 code while interrupts are hard disabled. This change has been
made.

* Because interrupts may or may not be hard disabled during a
context switch, cpu_switch() can no longer simply assume that
PSL_I will be in a consistent state. Therefore, it now saves and
restores eflags.

* FAST INTERRUPT PROVISION. Fast interrupts are currently deferred.
The intention is to eventually allow them to operate either while
we are in a critical section or, if we are able to restrict the
use of sched_lock, while we are not holding the sched_lock.

* ICU and APIC vector assembly for I386 cleaned up. The ICU code
has been cleaned up to match the APIC code in regards to format
and macro availability. Additionally, the code has been adjusted
to deal with deferred interrupts.

* Deferred interrupts use a per-cpu boolean int_pending, and
masks ipending, spending, and fpending. Being per-cpu variables
it is not currently necessary to lock; bus cycles modifying them.

Note that the same mechanism will enable preemption to be
incorporated as a true software interrupt without having to
further hack up the critical nesting code.

* Note: the old critical_enter() code in kern/kern_switch.c is
currently #ifdef to be compatible with both the old and new
methodology. In STAGE-2 it will be moved entirely to MD code.

Performance issues:

One of the purposes of this commit is to enhance critical section
performance, specifically to greatly reduce bus overhead to allow
the critical section code to be used to protect per-cpu caches.
These caches, such as Jeff's slab allocator work, can potentially
operate very quickly making the effective savings of the new
critical section code's performance very significant.

The second purpose of this commit is to allow architectures to
enable certain interrupts while in a critical section. Specifically,
the intention is to eventually allow certain FAST interrupts to
operate rather then defer.

The third purpose of this commit is to begin to clean up the
critical_enter()/critical_exit()/cpu_critical_enter()/
cpu_critical_exit() API which currently has serious cross pollution
in MI code (in fork_exit() and ast() for example).

The fourth purpose of this commit is to provide a framework that
allows kernel-preempting software interrupts to be implemented
cleanly. This is currently used for two forward interrupts in I386.
Other architectures will have the choice of using this infrastructure
or building the functionality directly into critical_enter()/
critical_exit().

Finally, this commit is designed to greatly improve the flexibility
of various architectures to manage critical section handling,
software interrupts, preemption, and other highly integrated
architecture-specific details.

show more ...

Lock struct pgrp, session and sigio.

New locks are:

- pgrpsess_lock which locks the whole pgrps and sessions,
- pg_mtx which protects the pgrp members, and
- s_mtx which protects the session member

Lock struct pgrp, session and sigio.

New locks are:

- pgrpsess_lock which locks the whole pgrps and sessions,
- pg_mtx which protects the pgrp members, and
- s_mtx which protects the session members.

Please refer to sys/proc.h for the coverage of these locks.

Changes on the pgrp/session interface:

- pgfind() needs the pgrpsess_lock held.

- The caller of enterpgrp() is responsible to allocate a new pgrp and
session.

- Call enterthispgrp() in order to enter an existing pgrp.

- pgsignal() requires a pgrp lock held.

Reviewed by: jhb, alfred
Tested on: cvsup.jp.FreeBSD.org
(which is a quad-CPU machine running -current)

show more ...

Add some DIAGNOSTIC code.
While in userland, keep the thread's ucred reference in a shadow
field so that the usual place to store it is NULL.
If DIAGNOSTIC is not set, the thread ucred is kept valid

Add some DIAGNOSTIC code.
While in userland, keep the thread's ucred reference in a shadow
field so that the usual place to store it is NULL.
If DIAGNOSTIC is not set, the thread ucred is kept valid until the next
kernel entry, at which time it is checked against the process cred
and possibly corrected. Produces a BIG speedup in
kernels with INVARIANTS set. (A previous commit corrected it
for the non INVARIANTS case already)

Reviewed by: dillon@freebsd.org

show more ...