Use g_handleattr() to reply to GEOM::candelete queries.

g_handleattr() fills out bp->bio_completed; otherwise, g_getattr()
returns an error in response to the query. This caused BIO_DELETE
support

Use g_handleattr() to reply to GEOM::candelete queries.

g_handleattr() fills out bp->bio_completed; otherwise, g_getattr()
returns an error in response to the query. This caused BIO_DELETE
support to not be propagated through stacked configurations, e.g.,
a gconcat of gmirror volumes would not handle BIO_DELETE even when
the gmirrors do. g_io_getattr() was not affected by the problem.

PR: 232676
Reported and tested by: noah.bergbauer@tum.de
MFC after: 1 week

show more ...

Merge ^/head r339813 through r340125.

Have gconcat advertise delete support if one of its disks does.

This follows the example set by other multi-disk GEOM classes.

PR: 232676
Tested by: noah.bergbauer@tum.de
MFC after: 1 month

Annotate geom modules with MODULE_VERSION

GEOM ELI may double ask the password during boot. Once at loader time, and
once at init time.

This happens due a module loading bug. By default GEOM ELI ca

Annotate geom modules with MODULE_VERSION

GEOM ELI may double ask the password during boot. Once at loader time, and
once at init time.

This happens due a module loading bug. By default GEOM ELI caches the
password in the kernel, but without the MODULE_VERSION annotation, the
kernel loads over the kernel module, even if the GEOM ELI was compiled into
the kernel. In this case, the newly loaded module
purges/invalidates/overwrites the GEOM ELI's password cache, which causes
the double asking.

MFC Note: There's a pc98 component to the original submission that is
omitted here due to pc98 removal in head. This part will need to be revived
upon MFC.

Reviewed by: imp
Submitted by: op
Obtained from: opBSD
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D14992

show more ...

sys/geom: adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone

sys/geom: adoption of SPDX licensing ID tags.

Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.

show more ...

Merge ^/head r305892 through r306302.

Use g_wither_provider() where applicable.

It is just a helper function combining G_PF_WITHER setting with
g_orphan_provider().

IFC @r269962

Submitted by: Anish Gupta (akgupt3@gmail.com)

Merge head from 7/28

Sync to HEAD@r269943.

Pull in r267961 and r267973 again. Fix for issues reported will follow.

Revert r267961, r267973:

These changes prevent sysctl(8) from returning proper output,
such as:

1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1

Revert r267961, r267973:

These changes prevent sysctl(8) from returning proper output,
such as:

1) no output from sysctl(8)
2) erroneously returning ENOMEM with tools like truss(1)
or uname(1)
truss: can not get etype: Cannot allocate memory

show more ...

Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statica

Extend the meaning of the CTLFLAG_TUN flag to automatically check if
there is an environment variable which shall initialize the SYSCTL
during early boot. This works for all SYSCTL types both statically and
dynamically created ones, except for the SYSCTL NODE type and SYSCTLs
which belong to VNETs. A new flag, CTLFLAG_NOFETCH, has been added to
be used in the case a tunable sysctl has a custom initialisation
function allowing the sysctl to still be marked as a tunable. The
kernel SYSCTL API is mostly the same, with a few exceptions for some
special operations like iterating childrens of a static/extern SYSCTL
node. This operation should probably be made into a factored out
common macro, hence some device drivers use this. The reason for
changing the SYSCTL API was the need for a SYSCTL parent OID pointer
and not only the SYSCTL parent OID list pointer in order to quickly
generate the sysctl path. The motivation behind this patch is to avoid
parameter loading cludges inside the OFED driver subsystem. Instead of
adding special code to the OFED driver subsystem to post-load tunables
into dynamically created sysctls, we generalize this in the kernel.

Other changes:
- Corrected a possibly incorrect sysctl name from "hw.cbb.intr_mask"
to "hw.pcic.intr_mask".
- Removed redundant TUNABLE statements throughout the kernel.
- Some minor code rewrites in connection to removing not needed
TUNABLE statements.
- Added a missing SYSCTL_DECL().
- Wrapped two very long lines.
- Avoid malloc()/free() inside sysctl string handling, in case it is
called to initialize a sysctl from a tunable, hence malloc()/free() is
not ready when sysctls from the sysctl dataset are registered.
- Bumped FreeBSD version to indicate SYSCTL API change.

MFC after: 2 weeks
Sponsored by: Mellanox Technologies

show more ...

Merge head

IFC @264767

MFC @ r259205 in preparation for some SVM updates. (for real this time)

Merge head r232040 through r257457.
M usr.sbin/portsnap/portsnap/portsnap.8
M usr.sbin/portsnap/portsnap/portsnap.sh
M usr.sbin/tcpdump/tcpdump/Makefile

Merge GEOM direct dispatch changes from the projects/camlock branch.

When safety requirements are met, it allows to avoid passing I/O requests
to GEOM g_up/g_down thread, executing them directly in

Merge GEOM direct dispatch changes from the projects/camlock branch.

When safety requirements are met, it allows to avoid passing I/O requests
to GEOM g_up/g_down thread, executing them directly in the caller context.
That allows to avoid CPU bottlenecks in g_up/g_down threads, plus avoid
several context switches per I/O.

The defined now safety requirements are:
- caller should not hold any locks and should be reenterable;
- callee should not depend on GEOM dual-threaded concurency semantics;
- on the way down, if request is unmapped while callee doesn't support it,
the context should be sleepable;
- kernel thread stack usage should be below 50%.

To keep compatibility with GEOM classes not meeting above requirements
new provider and consumer flags added:
- G_CF_DIRECT_SEND -- consumer code meets caller requirements (request);
- G_CF_DIRECT_RECEIVE -- consumer code meets callee requirements (done);
- G_PF_DIRECT_SEND -- provider code meets caller requirements (done);
- G_PF_DIRECT_RECEIVE -- provider code meets callee requirements (request).
Capable GEOM class can set them, allowing direct dispatch in cases where
it is safe. If any of requirements are not met, request is queued to
g_up or g_down thread same as before.

Such GEOM classes were reviewed and updated to support direct dispatch:
CONCAT, DEV, DISK, GATE, MD, MIRROR, MULTIPATH, NOP, PART, RAID, STRIPE,
VFS, ZERO, ZFS::VDEV, ZFS::ZVOL, all classes based on g_slice KPI (LABEL,
MAP, FLASHMAP, etc).

To declare direct completion capability disk(9) KPI got new flag equivalent
to G_PF_DIRECT_SEND -- DISKFLAG_DIRECT_COMPLETION. da(4) and ada(4) disk
drivers got it set now thanks to earlier CAM locking work.

This change more then twice increases peak block storage performance on
systems with manu CPUs, together with earlier CAM locking changes reaching
more then 1 million IOPS (512 byte raw reads from 16 SATA SSDs on 4 HBAs to
256 user-level threads).

Sponsored by: iXsystems, Inc.
MFC after: 2 months

show more ...

IFC @230489 (pending review).

IFC @ r227804

Pull in the virtio drivers from head.

Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.

The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else,

Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.

The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.

show more ...

Refactor disk disconnection and geom destruction handling sequences.
Do not close/destroy opened consumer directly in case of disconnect. Instead
keep it existing until it will be closed in regular w

Refactor disk disconnection and geom destruction handling sequences.
Do not close/destroy opened consumer directly in case of disconnect. Instead
keep it existing until it will be closed in regular way in response to
upstream provider destruction. Delay geom destruction in the same way.
Previous implementation could destroy consumers still having active
requests and worked only because of global workaround made on GEOM level.

show more ...

IFC @ r224187

Integrate from Head into ZFSD feature branch as of revision r224141.

Include sys/sbuf.h directly.

Reviewed by: pjd