#
c3c74c61 |
| 14-Dec-2009 |
Pyun YongHyeon <yongari@FreeBSD.org> |
s/u_intXX_t/uintXX_t/g
|
#
410f4c60 |
| 14-Dec-2009 |
Pyun YongHyeon <yongari@FreeBSD.org> |
Overhaul bus_dma(9) usage and fix various things. o Separate TX/RX buffer DMA tag from TX/RX descriptor ring DMA tag. o Separate RX buffer DMA tag from common buffer DMA tag. RX DMA tag has diff
Overhaul bus_dma(9) usage and fix various things. o Separate TX/RX buffer DMA tag from TX/RX descriptor ring DMA tag. o Separate RX buffer DMA tag from common buffer DMA tag. RX DMA tag has different restriction compared to TX DMA tag. o Add 40bit DMA address support. o Adjust TX/RX descriptor ring alignment to 64 bytes from 256 bytes as documented in datasheet. o Added check to ensure TX/RX ring reside within a 4GB boundary. Since TX/RX ring shares the same high address register they should have the same high address. o TX/RX side bus_dmamap_load_mbuf_sg(9) support. o Add lock assertion to vge_setmulti(). o Add RX spare DMA map to recover from DMA map load failure. o Add optimized RX buffer handler, vge_discard_rxbuf which is activated when vge(4) sees bad frames. o Don't blindly update VGE_RXDESC_RESIDUECNT register. Datasheet says the register should be updated only when number of available RX descriptors are multiple of 4. o Use __NO_STRICT_ALIGNMENT instead of defining VGE_FIXUP_RX which is only set for i386 architecture. Previously vge(4) also performed expensive copy operation to align IP header on amd64. This change should give RX performance boost on amd64 architecture. o Don't reinitialize controller if driver is already running. This should reduce number of link state flipping. o Since vge(4) drops a driver lock before passing received frame to upper layer, make sure vge(4) is still running after re-acquiring driver lock. o Add second argument count to vge_rxeof(). The argument will limit number of packets could be processed in RX handler. o Rearrange vge_rxeof() not to allocate RX buffer if received frame was bad packet. o Removed if_printf that prints DMA map failure. This type of message shouldn't be used in fast path of driver. o Reduce number of allowed TX buffer fragments to 6 from 7. A TX descriptor allows 7 fragments of a frame. However the CMZ field of descriptor has just 3bits and the controller wants to see fragment + 1 in the field. So if we have 7 fragments the field value would be 0 which seems to cause unexpected results under certain conditions. This change should fix occasional TX hang observed on vge(4). o Simplify vge_stat_locked() and add number of available TX descriptor check. o vge(4) controllers lack padding short frames. Make sure to fill zero for the padded bytes. This closes unintended information disclosure. o Don't set VGE_TDCTL_JUMBO flag. Datasheet is not clear whether this bit should be set by driver or write-back status bit after transmission. At least vendor's driver does not set this bit so remove it. Without this bit vge(4) still can send jumbo frames. o Don't start driver when vge(4) know there are not enough RX buffers. o Remove volatile keyword in RX descriptor structure. This should be handled by bus_dma(9). o Collapse two 16bits member of TX/RX descriptor into single 32bits member. o Reduce number of RX descriptors to 252 from 256. The VGE_RXDESCNUM is 16bits register but only lower 8bits are valid. So the maximum number of RX descriptors would be 255. However the number of should be multiple of 4 as controller wants to update 4 RX descriptors at a time. This limits the maximum number of RX descriptor to be 252.
Tested by: Dewayne Geraghty (dewayne.geraghty <> heuristicsystems dot com dot au) Carey Jones (m.carey.jones <> gmail dot com) Yoshiaki Kasahara (kasahara <> nc dor kyushu-u dot ac dotjp)
show more ...
|
Revision tags: release/8.0.0_cvs, release/8.0.0 |
|
#
67e1dfa7 |
| 19-Nov-2009 |
John Baldwin <jhb@FreeBSD.org> |
Several fixes to this driver: - Overhaul the locking to avoid recursion and add missing locking in a few places. - Don't schedule a task to call vge_start() from contexts that are safe to call vg
Several fixes to this driver: - Overhaul the locking to avoid recursion and add missing locking in a few places. - Don't schedule a task to call vge_start() from contexts that are safe to call vge_start() directly. Just invoke the routine directly instead (this is what all of the other NIC drivers I am familiar with do). Note that vge(4) does not use an interrupt filter handler which is the primary reason some other drivers use tasks. - Add a new private timer to drive the watchdog timer instead of using if_watchdog and if_timer. - Fixup detach by calling ether_ifdetach() before stopping the interface.
show more ...
|
#
dc8ecaac |
| 17-Nov-2009 |
John Baldwin <jhb@FreeBSD.org> |
Use the bus_*() routines rather than bus_space_*() for register operations.
|
#
874108ae |
| 12-Nov-2009 |
Oleksandr Tymoshenko <gonzo@FreeBSD.org> |
MFC @199204
|
#
f1b21184 |
| 06-Nov-2009 |
John Baldwin <jhb@FreeBSD.org> |
Use device_printf() and if_printf() instead of printf() with an explicit unit number and remove 'unit' members from softc.
|
Revision tags: release/7.2.0_cvs, release/7.2.0, release/7.1.0_cvs, release/7.1.0, release/6.4.0_cvs, release/6.4.0, release/7.0.0_cvs, release/7.0.0, release/6.3.0_cvs, release/6.3.0, release/6.2.0_cvs, release/6.2.0, release/5.5.0_cvs, release/5.5.0, release/6.1.0_cvs, release/6.1.0, release/6.0.0_cvs, release/6.0.0 |
|
#
fc74a9f9 |
| 10-Jun-2005 |
Brooks Davis <brooks@FreeBSD.org> |
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a c
Stop embedding struct ifnet at the top of driver softcs. Instead the struct ifnet or the layer 2 common structure it was embedded in have been replaced with a struct ifnet pointer to be filled by a call to the new function, if_alloc(). The layer 2 common structure is also allocated via if_alloc() based on the interface type. It is hung off the new struct ifnet member, if_l2com.
This change removes the size of these structures from the kernel ABI and will allow us to better manage them as interfaces come and go.
Other changes of note: - Struct arpcom is no longer referenced in normal interface code. Instead the Ethernet address is accessed via the IFP2ENADDR() macro. To enforce this ac_enaddr has been renamed to _ac_enaddr. - The second argument to ether_ifattach is now always the mac address from driver private storage rather than sometimes being ac_enaddr.
Reviewed by: sobomax, sam
show more ...
|
#
7ed5d5cc |
| 06-Jun-2005 |
Warner Losh <imp@FreeBSD.org> |
The PCI bus code saves/restores these config registers now.
|
Revision tags: release/5.4.0_cvs, release/5.4.0, release/4.11.0_cvs, release/4.11.0 |
|
#
098ca2bd |
| 06-Jan-2005 |
Warner Losh <imp@FreeBSD.org> |
Start each of the license/copyright comments with /*-, minor shuffle of lines
|
Revision tags: release/5.3.0_cvs, release/5.3.0 |
|
#
a07bd003 |
| 10-Sep-2004 |
Bill Paul <wpaul@FreeBSD.org> |
Add device driver support for the VIA Networking Technologies VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY. The vge driver has been added to GENERIC for i386, pc98 and amd64, bu
Add device driver support for the VIA Networking Technologies VT6122 gigabit ethernet chip and integrated 10/100/1000 copper PHY. The vge driver has been added to GENERIC for i386, pc98 and amd64, but not to sparc or ia64 since I don't have the ability to test it there. The vge(4) driver supports VLANs, checksum offload and jumbo frames.
Also added the lge(4) and nge(4) drivers to GENERIC for i386 and pc98 since I was in the neighborhood. There's no reason to leave them out anymore.
show more ...
|