Sync netmap sources with the version in our private tree.
This commit contains large contributions from Giuseppe Lettieri and
Stefano Garzarella, is partly supported by grants from Verisign and Cisco

Sync netmap sources with the version in our private tree.
This commit contains large contributions from Giuseppe Lettieri and
Stefano Garzarella, is partly supported by grants from Verisign and Cisco,
and brings in the following:

- fix zerocopy monitor ports and introduce copying monitor ports
(the latter are lower performance but give access to all traffic
in parallel with the application)

- exclusive open mode, useful to implement solutions that recover
from crashes of the main netmap client (suggested by Patrick Kelsey)

- revised memory allocator in preparation for the 'passthrough mode'
(ptnetmap) recently presented at bsdcan. ptnetmap is described in
S. Garzarella, G. Lettieri, L. Rizzo;
Virtual device passthrough for high speed VM networking,
ACM/IEEE ANCS 2015, Oakland (CA) May 2015
http://info.iet.unipi.it/~luigi/research.html

- fix rx CRC handing on ixl

- add module dependencies for netmap when building drivers as modules

- minor simplifications to device-specific routines (*txsync, *rxsync)

- general code cleanup (remove unused variables, introduce macros
to access rings and remove duplicate code,

Applications do not need to be recompiled, unless of course
they want to use the new features (monitors and exclusive open).

Those willing to try this code on stable/10 can just update the
sys/dev/netmap/*, sys/net/netmap* with the version in HEAD
and apply the small patches to individual device drivers.

MFC after: 1 month
Sponsored by: (partly) Verisign, Cisco

show more ...

Catch up with HEAD (r280229-r284686).

MFH: r282615-r283655

Sponsored by: The FreeBSD Foundation

Merge sync of head

When a netmap process terminates without the full set of buffers it
was granted via rings and ni_bufs_list_head represented in those rings
and lists (e.g., via SIGKILL), those buffers are no longer a

When a netmap process terminates without the full set of buffers it
was granted via rings and ni_bufs_list_head represented in those rings
and lists (e.g., via SIGKILL), those buffers are no longer available
for subsequent users for the lifetime of the system. To mitigate this
resource leak, reset the allocator state when the last ref to that
allocator is released.

Note that this only recovers leaked resources for an allocator when
there are no longer any users of that allocator, so there remain
circumstances in which leaked allocator resources may not ever be
recovered - consider a set of multiple netmap processes that are all
using the same allocator (say, the global allocator) where members of
that set may be killed and restarted over time but at any given point
there is one member of that set running.

Based on intial work by adrian@.

Reviewed by: Giuseppe Lettieri (g.lettieri@iet.unipi.it), luigi
Approved by: jmallett (mentor)
MFC after: 1 week
Sponsored by: Norse Corp, Inc.

show more ...

Merge from head@274682

IFC @r271694

IFC @r269962

Submitted by: Anish Gupta (akgupt3@gmail.com)

Sync to HEAD@r270409.

Merge head from 7/28

Update to the current version of netmap.
Mostly bugfixes or features developed in the past 6 months,
so this is a 10.1 candidate.

Basically no user API changes (some bugfixes in sys/net/netmap_user.

Update to the current version of netmap.
Mostly bugfixes or features developed in the past 6 months,
so this is a 10.1 candidate.

Basically no user API changes (some bugfixes in sys/net/netmap_user.h).

In detail:

1. netmap support for virtio-net, including in netmap mode.
Under bhyve and with a netmap backend [2] we reach over 1Mpps
with standard APIs (e.g. libpcap), and 5-8 Mpps in netmap mode.

2. (kernel) add support for multiple memory allocators, so we can
better partition physical and virtual interfaces giving access
to separate users. The most visible effect is one additional
argument to the various kernel functions to compute buffer
addresses. All netmap-supported drivers are affected, but changes
are mechanical and trivial

3. (kernel) simplify the prototype for *txsync() and *rxsync()
driver methods. All netmap drivers affected, changes mostly mechanical.

4. add support for netmap-monitor ports. Think of it as a mirroring
port on a physical switch: a netmap monitor port replicates traffic
present on the main port. Restrictions apply. Drive carefully.

5. if_lem.c: support for various paravirtualization features,
experimental and disabled by default.
Most of these are described in our ANCS'13 paper [1].
Paravirtualized support in netmap mode is new, and beats the
numbers in the paper by a large factor (under qemu-kvm,
we measured gues-host throughput up to 10-12 Mpps).

A lot of refactoring and additional documentation in the files
in sys/dev/netmap, but apart from #2 and #3 above, almost nothing
of this stuff is visible to other kernel parts.

Example programs in tools/tools/netmap have been updated with bugfixes
and to support more of the existing features.

This is meant to go into 10.1 so we plan an MFC before the Aug.22 deadline.

A lot of this code has been contributed by my colleagues at UNIPI,
including Giuseppe Lettieri, Vincenzo Maffione, Stefano Garzarella.

MFC after: 3 days.

show more ...

whitespace change: remove trailing whitespace

MFC @ r266724

An SVM update will follow this.

Merge head

IFC @264767

MFC @ r259635

This brings in the "-w" option from bhyve to ignore unknown MSRs.
It will make debugging Linux guests a bit easier.

Suggested by: Willem Jan Withagen (wjw at digiware nl)

MFH: tracking commit

Sponsored by: The FreeBSD Foundation

Merge head up to r262222 (last merge was incomplete).

This new version of netmap brings you the following:

- netmap pipes, providing bidirectional blocking I/O while moving
100+ Mpps between processes using shared memory channels
(no mistake: over

This new version of netmap brings you the following:

- netmap pipes, providing bidirectional blocking I/O while moving
100+ Mpps between processes using shared memory channels
(no mistake: over one hundred million. But mind you, i said
*moving* not *processing*);

- kqueue support (BHyVe needs it);

- improved user library. Just the interface name lets you select a NIC,
host port, VALE switch port, netmap pipe, and individual queues.
The upcoming netmap-enabled libpcap will use this feature.

- optional extra buffers associated to netmap ports, for applications
that need to buffer data yet don't want to make copies.

- segmentation offloading for the VALE switch, useful between VMs.

and a number of bug fixes and performance improvements.

My colleagues Giuseppe Lettieri and Vincenzo Maffione did a substantial
amount of work on these features so we owe them a big thanks.

There are some external repositories that can be of interest:

https://code.google.com/p/netmap
our public repository for netmap/VALE code, including
linux versions and other stuff that does not belong here,
such as python bindings.

https://code.google.com/p/netmap-libpcap
a clone of the libpcap repository with netmap support.
With this any libpcap client has access to most netmap
feature with no recompilation. E.g. tcpdump can filter
packets at 10-15 Mpps.

https://code.google.com/p/netmap-ipfw
a userspace version of ipfw+dummynet which uses netmap
to send/receive packets. Speed is up in the 7-10 Mpps
range per core for simple rulesets.

Both netmap-libpcap and netmap-ipfw will be merged upstream at some
point, but while this happens it is useful to have access to them.

And yes, this code will be merged soon. It is infinitely better
than the version currently in 10 and 9.

MFC after: 3 days

show more ...

MFC @ r259205 in preparation for some SVM updates. (for real this time)

MFH: Tracking commit (r260891)

Sponsored by: The FreeBSD Foundation

sync with our internal repo - small change in debugging messages

MFH: tracking commit (head@r260486)

Sponsored by: The FreeBSD Foundation

It is 2014 and we have a new version of netmap.
Most relevant features:

- netmap emulation on any NIC, even those without native netmap support.

On the ixgbe we have measured about 4Mpps/core/que

It is 2014 and we have a new version of netmap.
Most relevant features:

- netmap emulation on any NIC, even those without native netmap support.

On the ixgbe we have measured about 4Mpps/core/queue in this mode,
which is still a lot more than with sockets/bpf.

- seamless interconnection of VALE switch, NICs and host stack.

If you disable accelerations on your NIC (say em0)

ifconfig em0 -txcsum -txcsum

you can use the VALE switch to connect the NIC and the host stack:

vale-ctl -h valeXX:em0

allowing sharing the NIC with other netmap clients.

- THE USER API HAS SLIGHTLY CHANGED (head/cur/tail pointers
instead of pointers/count as before). This was unavoidable to support,
in the future, multiple threads operating on the same rings.
Netmap clients require very small source code changes to compile again.
On the plus side, the new API should be easier to understand
and the internals are a lot simpler.

The manual page has been updated extensively to reflect the current
features and give some examples.

This is the result of work of several people including Giuseppe Lettieri,
Vincenzo Maffione, Michio Honda and myself, and has been financially
supported by EU projects CHANGE and OPENLAB, from NetApp University
Research Fund, NEC, and of course the Universita` di Pisa.

show more ...

split netmap code according to functions:
- netmap.c base code
- netmap_freebsd.c FreeBSD-specific code
- netmap_generic.c emulate netmap over standard drivers
- netmap_mbq.c simple mbuf tailq
- ne

split netmap code according to functions:
- netmap.c base code
- netmap_freebsd.c FreeBSD-specific code
- netmap_generic.c emulate netmap over standard drivers
- netmap_mbq.c simple mbuf tailq
- netmap_mem2.c memory management
- netmap_vale.c VALE switch

simplify devce-specific code

show more ...