Set MIIF_HAVE_FIBER and add IFM_100_FX media when the AC_MCTL_FX_SEL
and thus the FX_DIS pin indicates fibre media. This is part 1/2 of
adding support for the 100baseFX interface/port of AT-2700 seri

Set MIIF_HAVE_FIBER and add IFM_100_FX media when the AC_MCTL_FX_SEL
and thus the FX_DIS pin indicates fibre media. This is part 1/2 of
adding support for the 100baseFX interface/port of AT-2700 series
adaptors.

Idea from: NetBSD
MFC after: 1 week

show more ...

- In acphy_service() for the MII_TICK case don't bother to check whether
the currently selected media is of type IFM_AUTO as auto-negotiation
doesn't need to be kicked anyway.
- Fix a whitespace

- In acphy_service() for the MII_TICK case don't bother to check whether
the currently selected media is of type IFM_AUTO as auto-negotiation
doesn't need to be kicked anyway.
- Fix a whitespace nit.
- Probe another Altima PHY, which is a AC101 workalike and integrated
in at least ADMtek ADM8511 but apparently is not mentioned in any
publically available data sheet so the actual identifier is unknown.
- Don't set MIIF_NOISOLATE so acphy(4) can be used in configurations
with multiple PHYs. There doesn't seem to be a problem with isolating
AC101 and workalikes per se nor in combination with the NICs they're
used with.
- Use mii_phy_add_media() instead of mii_add_media() so the latter can
be eventually retired.
- Take advantage of mii_phy_setmedia().

Obtained from: NetBSD (except for the first and second item)
MFC after: 2 weeks

show more ...

Add a helper function mii_phy_dev_probe(), which wraps around the
mii_phy_match() API and takes care of the PHY device probe based on
the struct mii_phydesc array and the match return value provided.

Add a helper function mii_phy_dev_probe(), which wraps around the
mii_phy_match() API and takes care of the PHY device probe based on
the struct mii_phydesc array and the match return value provided.
Convert PHY drivers to take advantage of mii_phy_dev_probe(),
converting drivers to provide a mii_phydesc table in the first
place where necessary.

Reviewed by: yongari
MFC after: 2 weeks

show more ...

Replace hard-coded magic constants to system defined constants
(BUS_PROBE_DEFAULT, BUS_PROBE_GENERIC etc).
There is no functional changes.

Reviewed by: oleg, scottl

Use ansi function definitions in preference to K&R to reduce diffs
with NetBSD (and cause it looks cooler).

Start each of the license/copyright comments with /*-, minor shuffle of lines

Remove double __FBSDID and move the remaining one into a common place after
the license(s) and before the driver comment (the latter only in drivers not
having __FBSDID at that location).

Use __FBSDID().
Also some minor style cleanups.

Use __FBSDID rather than rcsid[].

Remove miidevs.h and generate it from miidevs at compile time.
The devlist2h.awk tool to do this has been repocopied to sys/tools/.

Partial support for the nVidia nForce2 chipset's on-board Broadcom/Altima PHY
and 3com MAC. Specifications for the Altima PHY are available at:
http://www.altimacom.com/products/ac101L.html

Subm

Partial support for the nVidia nForce2 chipset's on-board Broadcom/Altima PHY
and 3com MAC. Specifications for the Altima PHY are available at:
http://www.altimacom.com/products/ac101L.html

Submitted by: Mikko S. Hyvarinen <morphy@morphy.iki.fi>

show more ...

Put function return types on a line by themselves.
Cleanup my earlier de-__P sweep and remove whitespace between function
names and paramters.

Clean up mii/phy drivers: Remove the MIIF_DOINGAUTO which doesn't really
do anything at the end of the day except bloat the drivers which has
copy&pasted it.

MII_TICK handlers need not restart aneg on these PHYs, they behave pretty
well as is, so - just fetch current status upon MII_TICK.

Also do IFM_INST verification at the top of *_service() then doing

MII_TICK handlers need not restart aneg on these PHYs, they behave pretty
well as is, so - just fetch current status upon MII_TICK.

Also do IFM_INST verification at the top of *_service() then doing it
separately for every case in switch.

acphy: do not read MII_ACPHY_DIAG twice, there is nothing latching.
qsphy: always fetch actual link status from MII_QSPHY_PCTL.

MFC after: 1 week

show more ...

Make one generic mii_phy_detach() to replace 19 slightly different ones.

Rename mii_phy_auto_stop() mii_phy_down().

Introduce mii_down(), use it from nge. Do not indirect it to 19 identical
case's

Make one generic mii_phy_detach() to replace 19 slightly different ones.

Rename mii_phy_auto_stop() mii_phy_down().

Introduce mii_down(), use it from nge. Do not indirect it to 19 identical
case's in 19 switchstatements like NetBSD did.

show more ...

Don't pass three args when one will do just fine, and even prevent
mistakes like the one brgphy.c (now corrected).

Improve an API by about 4 lines per driver.

Remove __P.

Cleanup pass for mii drivers.
. Make internal service routines static.
. Use a consistent ordering of checks in MII_TICK. Do the work in the
mii_phy_tick() subroutine if appropriate.
.

Cleanup pass for mii drivers.
. Make internal service routines static.
. Use a consistent ordering of checks in MII_TICK. Do the work in the
mii_phy_tick() subroutine if appropriate.
. Call mii_phy_update() to trigger the callbacks.

show more ...

Oops... I knew i shouldn't use arrows in vi. Fix a typo causing errors in
compilation.

Add QS6612, AC101 and LXT970 personal drivers and register definitions.

Obtained from: NetBSD/OpenBSD

Set MIIF_HAVE_FIBER and add IFM_100_FX media when the AC_MCTL_FX_SEL
and thus the FX_DIS pin indicates fibre media. This is part 1/2 of
adding support for the 100baseFX interface/port of AT-2700 seri

Set MIIF_HAVE_FIBER and add IFM_100_FX media when the AC_MCTL_FX_SEL
and thus the FX_DIS pin indicates fibre media. This is part 1/2 of
adding support for the 100baseFX interface/port of AT-2700 series
adaptors.

Idea from: NetBSD
MFC after: 1 week

show more ...

- In acphy_service() for the MII_TICK case don't bother to check whether
the currently selected media is of type IFM_AUTO as auto-negotiation
doesn't need to be kicked anyway.
- Fix a whitespace

- In acphy_service() for the MII_TICK case don't bother to check whether
the currently selected media is of type IFM_AUTO as auto-negotiation
doesn't need to be kicked anyway.
- Fix a whitespace nit.
- Probe another Altima PHY, which is a AC101 workalike and integrated
in at least ADMtek ADM8511 but apparently is not mentioned in any
publically available data sheet so the actual identifier is unknown.
- Don't set MIIF_NOISOLATE so acphy(4) can be used in configurations
with multiple PHYs. There doesn't seem to be a problem with isolating
AC101 and workalikes per se nor in combination with the NICs they're
used with.
- Use mii_phy_add_media() instead of mii_add_media() so the latter can
be eventually retired.
- Take advantage of mii_phy_setmedia().

Obtained from: NetBSD (except for the first and second item)
MFC after: 2 weeks

show more ...

Add a helper function mii_phy_dev_probe(), which wraps around the
mii_phy_match() API and takes care of the PHY device probe based on
the struct mii_phydesc array and the match return value provided.

Add a helper function mii_phy_dev_probe(), which wraps around the
mii_phy_match() API and takes care of the PHY device probe based on
the struct mii_phydesc array and the match return value provided.
Convert PHY drivers to take advantage of mii_phy_dev_probe(),
converting drivers to provide a mii_phydesc table in the first
place where necessary.

Reviewed by: yongari
MFC after: 2 weeks

show more ...

Replace hard-coded magic constants to system defined constants
(BUS_PROBE_DEFAULT, BUS_PROBE_GENERIC etc).
There is no functional changes.

Reviewed by: oleg, scottl